[How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi

[remy1961]

pydPiper for the 128x64 oled and raspdac script for the 16x2 oled.



Remy

Hi Remy, where can I find a procedure to enable Display like in this picture? I don't care about specrtum analyzer and I've been able to display what I want but... I loose everything every tyme I reload or reboot the system... please help me!
thanks
Angelo ( Rome - IT )

Hi Angelo,

You just have to follow this tutorial. What kind of display do you have?

Remy

[angelo.rossi76]

pydPiper for the 128x64 oled and raspdac script for the 16x2 oled.



Remy

Hi Remy, where can I find a procedure to enable Display like in this picture? I don't care about specrtum analyzer and I've been able to display what I want but... I loose everything every tyme I reload or reboot the system... please help me!
thanks
Angelo ( Rome - IT )

Hi Angelo,

You just have to follow this tutorial. What kind of display do you have?

Remy

Thanks Remy I've a SSD1306 display ( this: https://www.amazon.it/gp/product/B06XRBY...UTF8&psc=1)  and I followed your tutorial, and my display works fine!!! since I reload/reboot the system, may it be a rel.4.4 problem?

[remy1961]

pydPiper for the 128x64 oled and raspdac script for the 16x2 oled.



Remy

Hi Remy, where can I find a procedure to enable Display like in this picture? I don't care about specrtum analyzer and I've been able to display what I want but... I loose everything every tyme I reload or reboot the system... please help me!
thanks
Angelo ( Rome - IT )

Hi Angelo,

You just have to follow this tutorial. What kind of display do you have?

Remy

Thanks Remy I've a SSD1306 display ( this: https://www.amazon.it/gp/product/B06XRBY...UTF8&psc=1)  and I followed your tutorial, and my display works fine!!! since I reload/reboot the system, may it be a rel.4.4 problem?

Hi. I am still on 4.3. I noticed that when i update to 4.4, my display works most of the time, but sometime it does not work. No time to investigate now. 
Remy

[angelo.rossi76]

pydPiper for the 128x64 oled and raspdac script for the 16x2 oled.



Remy

Hi Remy, where can I find a procedure to enable Display like in this picture? I don't care about specrtum analyzer and I've been able to display what I want but... I loose everything every tyme I reload or reboot the system... please help me!
thanks
Angelo ( Rome - IT )

Hi Angelo,

You just have to follow this tutorial. What kind of display do you have?

Remy

Thanks Remy I've a SSD1306 display ( this: https://www.amazon.it/gp/product/B06XRBY...UTF8&psc=1)  and I followed your tutorial, and my display works fine!!! since I reload/reboot the system, may it be a rel.4.4 problem?

Hi. I am still on 4.3. I noticed that when i update to 4.4, my display works most of the time, but sometime it does not work. No time to investigate now. 
Remy

I'll try to rollback to 4.3, i think it would be fine to write on what release funtions are developed... thanks again!
Angelo

[CallMeMike]

Hi. I am still on 4.3. I noticed that when i update to 4.4, my display works most of the time, but sometime it does not work. No time to investigate now. 
Remy
I'll try to rollback to 4.3, i think it would be fine to write on what release funtions are developed... thanks again!
Angelo

@angelo.rossi76

Release Notes here Release 4.4 Notes  well within the reach of all the users. Could it be Line 34 'a prime suspect' in your investigation...?

[angelo.rossi76]

Hi. I am still on 4.3. I noticed that when i update to 4.4, my display works most of the time, but sometime it does not work. No time to investigate now. 
Remy
I'll try to rollback to 4.3, i think it would be fine to write on what release funtions are developed... thanks again!
Angelo

@angelo.rossi76

Release Notes here Release 4.4 Notes  well within the reach of all the users. Could it be Line 34 'a prime suspect' in your investigation...?

ok thanks Mike, you meant in line 34 there's the reason why my display is no more working after reboot or in line 34 I can find developements?
tkx
Angelo

[CallMeMike]

Hi. I am still on 4.3. I noticed that when i update to 4.4, my display works most of the time, but sometime it does not work. No time to investigate now. 
Remy
I'll try to rollback to 4.3, i think it would be fine to write on what release funtions are developed... thanks again!
Angelo

@angelo.rossi76

Release Notes here Release 4.4 Notes  well within the reach of all the users. Could it be Line 34 'a prime suspect' in your investigation...?

ok thanks Mike, you meant in line 34 there's the reason why my display is no more working after reboot or in line 34 I can find developements?
tkx
Angelo

<< line 34  - UPD: Bump to Linux kernel 4.14.84 >> 

It may be that Moode v4.3 version was based on an earlier Linux kernel thus making it a possible cause for your display issue. Should this be the case (after you check the Release Notes and there are no other question marks) it means that the issue is external to Moode...

[stanfordcg]

Just trying out moode 5.1 however can't get the patch to install for mpd, get the following:

patching file /var/www/command/worker.php
Hunk #1 FAILED at 374.
1 out of 1 hunk FAILED -- saving rejects to file /var/www/command/worker.php.rej
patching file /var/www/inc/playerlib.php
Hunk #1 succeeded at 1294 with fuzz 2 (offset 126 lines).

Any ideas?

Reject file:

--- /var/www/command/worker.php 2018-04-26 20:06:55.830000000 +0200
+++ www/command/worker.php 2018-04-28 07:42:27.179961953 +0200
@@ -374,6 +374,7 @@
 workerLog('worker: Configure MPD outputs');
 $mpdoutput = configMpdOutputs();
 sysCmd('mpc enable only ' . $mpdoutput);
+sysCmd('mpc enable mpd_oled_FIFO');
 // report mpd outputs
 $sock = openMpdSock('localhost', 6600);
 sendMpdCmd($sock, 'outputs');

[adrii]

Hi stanfordcg

Thanks for the report. The error means that there have been changes to these Moode system files since I made the patch file, and the patch file is no longer vailid. I will produce a new patch file that works with the latest Moode version (but I might not be able to look at this until next week).

Adrian.

[stanfordcg]

Hi stanfordcg

Thanks for the report. The error means that there have been changes to these Moode system files since I made the patch file, and the patch file is no longer vailid. I will produce a new patch file that works with the latest Moode version (but I might not be able to look at this until next week).

Adrian.

thanks Adrian, will put my 4.4 card back in for now.