[How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi

[adrii]

I wrote to Suptronics, who make the X920 that ghera78 uses

I have developed an application to provide an OLED display with a music
player running on a Raspberry Pi.

    https://github.com/antiprism/mpd_oled

I have received a report that when a small SSD1306 I2C OLED is used
with your X920 DAC on Volumio, the OLED freezes every time that the
music starts or stops (presumably when the X920 is using the I2C bus).
If the mpd_oled application is restarted after the freeze the OLED works
correctly again until the music is started or stopped, which then freezes
the OLED again.

I wonder if you are aware of any issues running an I2C OLED with the
X920 DAC? I would be grateful for any help or suggestions, as I would
like to support the use of mpd_oled with your DAC.

Suptronics were kind enoght to reply with the following

The X920 used the same DAC chipset as other DAC board (PCM5122) so I think
this should be a common issue. The X920 also uses I2C and it connects to the
chipset directly.
Sorry that I have not received any feedback of this. the X920 was
discontinued at the end of 2018. And we have no plan to continue it.

The Herb Guy, have you written to Hifiberry, or do you plan to?

Adrian.