10-14-2019, 04:08 PM
On previous devices I've set up with only Shairport-Sync I'm able to put in set up my .config file to utilize my USB DAC's hardware volume control. The benefits are much faster volume changes and louder overall volume output.
I'd like to do the same for Moode, but when I go into MPD config, only the Software volume setting will output anything. I have to change the Alsa volume to 100 and then set the volume dial in the moode web interface up above 40 to get any sound output.
Is there a way to use Hardware volume with the USB DAC and generally get volume configured better on my setup?
Thanks for any suggestions.
I'd like to do the same for Moode, but when I go into MPD config, only the Software volume setting will output anything. I have to change the Alsa volume to 100 and then set the volume dial in the moode web interface up above 40 to get any sound output.
Is there a way to use Hardware volume with the USB DAC and generally get volume configured better on my setup?
Code:
pi@moode:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
btaplay_dmix
alsaequal
plug_alsaequal
btstream
crossfeed
plug_bs2b
eqfa4p
plug_eqfa4p
invpolarity
default:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
dmix:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample mixing device
dmix:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample mixing device
dmix:CARD=ALSA,DEV=2
bcm2835 ALSA, bcm2835 IEC958/HDMI1
Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample snooping device
dsnoop:CARD=ALSA,DEV=2
bcm2835 ALSA, bcm2835 IEC958/HDMI1
Direct sample snooping device
hw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct hardware device without any conversions
hw:CARD=ALSA,DEV=2
bcm2835 ALSA, bcm2835 IEC958/HDMI1
Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Hardware device with all software conversions
plughw:CARD=ALSA,DEV=2
bcm2835 ALSA, bcm2835 IEC958/HDMI1
Hardware device with all software conversions
default:CARD=Device
USB Audio Device, USB Audio
Default Audio Device
sysdefault:CARD=Device
USB Audio Device, USB Audio
Default Audio Device
front:CARD=Device,DEV=0
USB Audio Device, USB Audio
Front speakers
surround21:CARD=Device,DEV=0
USB Audio Device, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
USB Audio Device, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
USB Audio Device, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
USB Audio Device, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
USB Audio Device, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
USB Audio Device, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
USB Audio Device, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
USB Audio Device, USB Audio
Direct sample mixing device
dsnoop:CARD=Device,DEV=0
USB Audio Device, USB Audio
Direct sample snooping device
hw:CARD=Device,DEV=0
USB Audio Device, USB Audio
Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
USB Audio Device, USB Audio
Hardware device with all software conversions Code:
pi@moode:~ $ cat /proc/asound/cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
1 [Device ]: USB-Audio - USB Audio Device
GeneralPlus USB Audio Device at usb-3f980000.usb-1.2, full speed Code:
pi@moode:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0 Thanks for any suggestions.
