moodeaudio.org > Moode Forum › moOde audio player › Support v
Unable to connect to a Nas

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
Unable to connect to a Nas
gorgonetriton Offline
Junior Member
*
Posts: 8
Threads: 2
Joined: Aug 2020
Reputation: 0
#1
Photo  08-28-2020, 07:13 AM
Hi there, trying to connect a Synology nas to a Moode running Allo Usbridge Player
I tried to follow the instructions but something's not working somehow

Since I'm a real noob I'll post pictures to make the different steps of the setup as clear as possible
first the nas basic infos

shared folder:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS-1.png]

network info:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS.png]
SAMBA service enabled:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS-2.png]

Then the moode configuration:
[Image: Screenshot-2020-08-28-mo-Ode-Player-1.png]

Then, after saving:
[Image: Screenshot-2020-08-28-mo-Ode-Player-2.png]

NAS mount error: Click to view moode.log for errors


Code:
20200827 183253 worker: -- Start
20200827 183254 worker: Successfully daemonized
20200827 183254 worker: Integrity check (passed)
20200827 183254 worker: Session loaded
20200827 183254 worker: Debug logging (off)
20200827 183254 worker: Device raw: Card0 (ALSA) | Card1 (AUDIO) | I2Sdev (none)
20200827 183254 worker: Device cfg: Name (USB audio device) | Card (1) | MPDdev (1) | Mixer (SMSL USB AUDIO) | Alsavol: (none)
20200827 183254 worker: ALSA volume (None)
20200827 183254 worker: -- System
20200827 183257 worker: Host name     (moode)
20200827 183257 worker: moOde release (6.4.0 2019-11-24)
20200827 183257 worker: Raspbian OS   (10.2)
20200827 183257 worker: Linux kernel  (4.19.83-v7+ #1277)
20200827 183257 worker: Platform      (Allo USBridge SIG [Pi-CM3+ Lite 1GB v1.0])
20200827 183257 worker: Architecture  (armv7l)
20200827 183257 worker: MPD version   (0.21.16)
20200827 183257 worker: CPU governor  (ondemand)
20200827 183257 worker: USB boot not available
20200827 183257 worker: File system not expanded yet
20200827 183257 worker: HDMI port on
20200827 183258 worker: File check (OK)
20200827 183258 worker: -- Network
20200827 183258 worker: eth0 exists
20200827 183258 worker: IP addr (192.168.1.26)
20200827 183258 worker: Netmask (255.255.255.0)
20200827 183258 worker: Gateway (192.168.1.1)
20200827 183258 worker: Pri DNS ()
20200827 183258 worker: Domain  (192.168.1.1)
20200827 183258 worker: wlan0 does not exist
20200827 183258 worker: -- Audio
20200827 183259 worker: ALSA outputs unmuted
20200827 183259 worker: ALSA card number (1)
20200827 183259 worker: Audio output (USB audio device)
20200827 183259 worker: Audio formats (Unable to determine formats)
20200827 183300 worker: ALSA mixer name (SMSL USB AUDIO)
20200827 183300 worker: MPD volume control (software)
20200827 183300 worker: Hdwr volume controller not detected
20200827 183300 worker: -- Services
20200827 183300 worker: Reset renderer active state
20200827 183300 worker: MPD conf updated
20200827 183300 worker: MPD started
20200827 183301 worker: MPD accepting connections
20200827 183301 worker: Configure MPD outputs
20200827 183301 worker: MPD output 1 ALSA default (on)
20200827 183301 worker: MPD output 2 ALSA crossfeed (off)
20200827 183301 worker: MPD output 3 ALSA parametric eq (off)
20200827 183301 worker: MPD output 4 ALSA graphic eq (off)
20200827 183301 worker: MPD output 5 ALSA polarity inversion (off)
20200827 183301 worker: MPD output 6 ALSA bluetooth (off)
20200827 183301 worker: MPD output 7 HTTP stream (off)
20200827 183301 worker: MPD crossfade (off)
20200827 183301 worker: Audio source (Local)
20200827 183301 worker: Output device (Local)
20200827 183301 worker: USB auto-mounter (udisks-glue)
20200827 183301 worker: -- Music sources
20200827 183302 worker: USB sources (none attached)
20200827 183302 worker: NAS and UPnP sources (none configured)
20200827 183302 worker: -- Miscellaneous
20200827 183302 worker: Saved MPD vol level (0)
20200827 183302 worker: Preamp volume level (0)
20200827 183302 worker: MPD volume level (25) restored
20200827 183302 worker: ALSA volume level (None)
20200827 183302 worker: Auto-play (Off)
20200827 183302 worker: Maintenance interval (6 hrs)
20200827 183302 worker: Screen saver activation (Never)
20200827 183302 worker: Session permissions (OK)
20200827 183302 worker: Watchdog started
20200827 183302 worker: Ready
20200827 183302 watchdog: INFO Audio output is (closed)
20200827 214455 worker: Job sourcecfg
20200827 214456 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 214459 worker: Job updmpddb
20200827 214503 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 214513 worker: Job updmpddb
20200827 214725 worker: Job rescanmpddb
20200827 214822 worker: Job updthmcache
20200827 214822 thmcache: Start
20200827 214822 thmcache: directory: SDCARD
20200827 214822 thmcache: Done: 1 album dirs processed
20200827 215516 worker: Job sourcecfg
20200827 215519 worker: Job updmpddb
20200827 215700 worker: Job sourcecfg
20200827 215702 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 215705 worker: Job updmpddb
20200827 215711 worker: Job updmpddb
20200827 215811 worker: Job updthmcache
20200827 215812 thmcache: Start
20200827 215812 thmcache: directory: SDCARD
20200827 215812 thmcache: directory: NAS
20200827 215812 thmcache: directory: USB
20200827 215812 thmcache: Done: 1 album dirs processed
20200827 220224 worker: Job sourcecfg
20200827 220225 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 220228 worker: Job updmpddb
20200827 220303 worker: Job sourcecfg
20200827 220305 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 220308 worker: Job updmpddb
20200827 220336 worker: Job sourcecfg
20200827 220337 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 220340 worker: Job updmpddb
20200827 220456 worker: Job sourcecfg
20200827 220457 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 220501 worker: Job updmpddb
20200827 221013 worker: Job sourcecfg
20200827 221014 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 221017 worker: Job updmpddb
20200827 221030 worker: Job sourcecfg
20200827 221034 worker: Job updmpddb
20200827 221211 worker: Job sourcecfg
20200827 221222 sourceMount(): Mount error: (mount error(115): Operation now in progress
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 221225 worker: Job updmpddb
20200827 221232 worker: Job updmpddb
20200827 222533 worker: Job sourcecfg
20200827 222535 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 222539 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 222539 worker: Job updmpddb
20200828 010616 worker: Maintenance completed
20200828 072432 worker: Maintenance completed
20200828 075650 worker: Job sourcecfg
20200828 075652 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200828 075655 worker: Job updmpddb
20200828 075724 worker: Job sourcecfg
20200828 075727 worker: Job updmpddb
20200828 075730 worker: Job updmpddb
20200828 081625 watchdog: INFO Audio output is (in use)
20200828 081631 watchdog: INFO Audio output is (in use)
20200828 083010 worker: Job sourcecfg
20200828 083011 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200828 083014 worker: Job updmpddb


Have I done anything wrong?
Thank you for your support
Find
Reply
vinnn Offline
Senior Member
*
Posts: 442
Threads: 9
Joined: Sep 2019
Reputation: 27
#2
08-28-2020, 08:01 AM (This post was last modified: 08-28-2020, 08:02 AM by vinnn.)
You're trying to mount a share called "music" on your NAS but looking at the screenshot there's just one share called "LaTaniere"
I suspect if you just hit the [SCAN] button when creating the music source on Moode you'll see what shares are available in the drop down list.
Find
Reply
gorgonetriton Offline
Junior Member
*
Posts: 8
Threads: 2
Joined: Aug 2020
Reputation: 0
#3
08-28-2020, 08:36 AM
Well the drop down list stays blank when I hit the scan button...
Find
Reply
Blixa Offline
Member
*
Posts: 58
Threads: 6
Joined: Mar 2019
Reputation: 0
#4
08-28-2020, 09:41 AM
(08-28-2020, 07:13 AM)gorgonetriton Wrote: Hi there, trying to connect a Synology nas to a Moode running Allo Usbridge Player
I tried to follow the instructions but something's not working somehow

Since I'm a real noob I'll post pictures to make the different steps of the setup as clear as possible
first the nas basic infos

shared folder:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS-1.png]

network info:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS.png]
SAMBA service enabled:
[Image: Screenshot-2020-08-28-La-Taniere-Synology-NAS-2.png]

Then the moode configuration:
[Image: Screenshot-2020-08-28-mo-Ode-Player-1.png]

Then, after saving:
[Image: Screenshot-2020-08-28-mo-Ode-Player-2.png]

NAS mount error: Click to view moode.log for errors


Code:
20200827 183253 worker: -- Start
20200827 183254 worker: Successfully daemonized
20200827 183254 worker: Integrity check (passed)
20200827 183254 worker: Session loaded
20200827 183254 worker: Debug logging (off)
20200827 183254 worker: Device raw: Card0 (ALSA) | Card1 (AUDIO) | I2Sdev (none)
20200827 183254 worker: Device cfg: Name (USB audio device) | Card (1) | MPDdev (1) | Mixer (SMSL USB AUDIO) | Alsavol: (none)
20200827 183254 worker: ALSA volume (None)
20200827 183254 worker: -- System
20200827 183257 worker: Host name     (moode)
20200827 183257 worker: moOde release (6.4.0 2019-11-24)
20200827 183257 worker: Raspbian OS   (10.2)
20200827 183257 worker: Linux kernel  (4.19.83-v7+ #1277)
20200827 183257 worker: Platform      (Allo USBridge SIG [Pi-CM3+ Lite 1GB v1.0])
20200827 183257 worker: Architecture  (armv7l)
20200827 183257 worker: MPD version   (0.21.16)
20200827 183257 worker: CPU governor  (ondemand)
20200827 183257 worker: USB boot not available
20200827 183257 worker: File system not expanded yet
20200827 183257 worker: HDMI port on
20200827 183258 worker: File check (OK)
20200827 183258 worker: -- Network
20200827 183258 worker: eth0 exists
20200827 183258 worker: IP addr (192.168.1.26)
20200827 183258 worker: Netmask (255.255.255.0)
20200827 183258 worker: Gateway (192.168.1.1)
20200827 183258 worker: Pri DNS ()
20200827 183258 worker: Domain  (192.168.1.1)
20200827 183258 worker: wlan0 does not exist
20200827 183258 worker: -- Audio
20200827 183259 worker: ALSA outputs unmuted
20200827 183259 worker: ALSA card number (1)
20200827 183259 worker: Audio output (USB audio device)
20200827 183259 worker: Audio formats (Unable to determine formats)
20200827 183300 worker: ALSA mixer name (SMSL USB AUDIO)
20200827 183300 worker: MPD volume control (software)
20200827 183300 worker: Hdwr volume controller not detected
20200827 183300 worker: -- Services
20200827 183300 worker: Reset renderer active state
20200827 183300 worker: MPD conf updated
20200827 183300 worker: MPD started
20200827 183301 worker: MPD accepting connections
20200827 183301 worker: Configure MPD outputs
20200827 183301 worker: MPD output 1 ALSA default (on)
20200827 183301 worker: MPD output 2 ALSA crossfeed (off)
20200827 183301 worker: MPD output 3 ALSA parametric eq (off)
20200827 183301 worker: MPD output 4 ALSA graphic eq (off)
20200827 183301 worker: MPD output 5 ALSA polarity inversion (off)
20200827 183301 worker: MPD output 6 ALSA bluetooth (off)
20200827 183301 worker: MPD output 7 HTTP stream (off)
20200827 183301 worker: MPD crossfade (off)
20200827 183301 worker: Audio source (Local)
20200827 183301 worker: Output device (Local)
20200827 183301 worker: USB auto-mounter (udisks-glue)
20200827 183301 worker: -- Music sources
20200827 183302 worker: USB sources (none attached)
20200827 183302 worker: NAS and UPnP sources (none configured)
20200827 183302 worker: -- Miscellaneous
20200827 183302 worker: Saved MPD vol level (0)
20200827 183302 worker: Preamp volume level (0)
20200827 183302 worker: MPD volume level (25) restored
20200827 183302 worker: ALSA volume level (None)
20200827 183302 worker: Auto-play (Off)
20200827 183302 worker: Maintenance interval (6 hrs)
20200827 183302 worker: Screen saver activation (Never)
20200827 183302 worker: Session permissions (OK)
20200827 183302 worker: Watchdog started
20200827 183302 worker: Ready
20200827 183302 watchdog: INFO Audio output is (closed)
20200827 214455 worker: Job sourcecfg
20200827 214456 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 214459 worker: Job updmpddb
20200827 214503 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 214513 worker: Job updmpddb
20200827 214725 worker: Job rescanmpddb
20200827 214822 worker: Job updthmcache
20200827 214822 thmcache: Start
20200827 214822 thmcache: directory: SDCARD
20200827 214822 thmcache: Done: 1 album dirs processed
20200827 215516 worker: Job sourcecfg
20200827 215519 worker: Job updmpddb
20200827 215700 worker: Job sourcecfg
20200827 215702 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 215705 worker: Job updmpddb
20200827 215711 worker: Job updmpddb
20200827 215811 worker: Job updthmcache
20200827 215812 thmcache: Start
20200827 215812 thmcache: directory: SDCARD
20200827 215812 thmcache: directory: NAS
20200827 215812 thmcache: directory: USB
20200827 215812 thmcache: Done: 1 album dirs processed
20200827 220224 worker: Job sourcecfg
20200827 220225 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 220228 worker: Job updmpddb
20200827 220303 worker: Job sourcecfg
20200827 220305 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 220308 worker: Job updmpddb
20200827 220336 worker: Job sourcecfg
20200827 220337 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 220340 worker: Job updmpddb
20200827 220456 worker: Job sourcecfg
20200827 220457 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 220501 worker: Job updmpddb
20200827 221013 worker: Job sourcecfg
20200827 221014 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 221017 worker: Job updmpddb
20200827 221030 worker: Job sourcecfg
20200827 221034 worker: Job updmpddb
20200827 221211 worker: Job sourcecfg
20200827 221222 sourceMount(): Mount error: (mount error(115): Operation now in progress
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200827 221225 worker: Job updmpddb
20200827 221232 worker: Job updmpddb
20200827 222533 worker: Job sourcecfg
20200827 222535 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 222539 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200827 222539 worker: Job updmpddb
20200828 010616 worker: Maintenance completed
20200828 072432 worker: Maintenance completed
20200828 075650 worker: Job sourcecfg
20200828 075652 sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)
20200828 075655 worker: Job updmpddb
20200828 075724 worker: Job sourcecfg
20200828 075727 worker: Job updmpddb
20200828 075730 worker: Job updmpddb
20200828 081625 watchdog: INFO Audio output is (in use)
20200828 081631 watchdog: INFO Audio output is (in use)
20200828 083010 worker: Job sourcecfg
20200828 083011 sourceMount(): Mount error: (mount error(95): Operation not supported
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
20200828 083014 worker: Job updmpddb


Have I done anything wrong?
Thank you for your support

Hi, i've Synology and your NAS settings seems ok..have you tried with NFS instead Samba?
Find
Reply
the_bertrum Online
Senior Member+
*
Posts: 1,562
Threads: 35
Joined: Mar 2020
Reputation: 72
#5
08-28-2020, 10:16 AM
Check your mount flags, my synology uses vers=2.0 or above by default but the flags on moode default to 1.0
   
----------------
Robert
Find
Reply
gorgonetriton Offline
Junior Member
*
Posts: 8
Threads: 2
Joined: Aug 2020
Reputation: 0
#6
08-28-2020, 11:53 AM
I tried that setting, changing the path, manually setting the mount flag to 3.0 (event though I don't know where to check about on the synology OS) still Nas mount error... Undecided
As for the NFS, it seems even harder to configure, maybe should I try a bit more with the Samba before jumping in
thanks for all your advices anyway!


[Image: Screenshot-2020-08-28-mo-Ode-Player-3.png]
Find
Reply
TheOldPresbyope Offline
Moderator
****
Posts: 5,547
Threads: 168
Joined: Apr 2018
Reputation: 205
#7
08-28-2020, 01:15 PM
@gorgonetriton


Sadly, the error messages emitted by the file-system mount routines are difficult to interpret. I'm puzzled by repetitions of this line in your posted output:

Code:
sourceMount(): Mount error: (mount error: could not resolve address for http:: Unknown error)

This says the mount command is looking for a host named "http:" which is just plain wrong. I can't see from what you've posted so far how this name got into the picture.

Perhaps unrelated, your remark "Well the drop down list stays blank when I hit the scan button..." suggests there's an issue with services on your LAN.

If you go to the command line of your player (use moOde's built-in SSH Terminal or use ssh from another computer), what do you get with the smbtree command? As an example, here's the first few stanzas of the output when I run this command on one of my players:

Code:
pi@moode3a:~ $ smbtree -b -N
Unable to initialize messaging context
WORKGROUP
    \\OMV-HC1                omv-hc1 server
        \\OMV-HC1\IPC$               IPC Service (omv-hc1 server)
        \\OMV-HC1\Test               
        \\OMV-HC1\MUSIC              
    \\MOODELD                moOde SMB Server
        \\MOODELD\IPC$               IPC Service (moOde SMB Server)
        \\MOODELD\SDCard             SDCARD Storage
        \\MOODELD\Radio              RADIO Stations
        \\MOODELD\Playlists          Playlist Directory
        \\MOODELD\NAS                NAS Shares
...

pi@moode3a:~ $ ping omv-hc1
PING omv-hc1.fios-router.home (192.168.1.12) 56(84) bytes of data.
64 bytes from omv-hc1.local (192.168.1.12): icmp_seq=1 ttl=64 time=4.42 ms
^C


Here, OMV-HC1 is the hostname of my OpenMediaVault NAS while Test and MUSIC are the published names of the two SAMBA shares on that server. MOODELD is another one of my moOde players.

So, were I manually to enter the server path in the moOde Music Source screen, I would enter "OMV-HC1/MUSIC" (without the quotation marks). On my network, I could equally well enter "192.168.1.12/MUSIC".

Regards,
Kent
Find
Reply
the_bertrum Online
Senior Member+
*
Posts: 1,562
Threads: 35
Joined: Mar 2020
Reputation: 72
#8
08-28-2020, 02:10 PM
(08-28-2020, 11:53 AM)gorgonetriton Wrote: I tried that setting, changing the path, manually setting the mount flag to 3.0 (event though I don't know where to check about on the synology OS) still Nas mount error... Undecided
As for the NFS, it seems even harder to configure, maybe should I try a bit more with the Samba before jumping in
thanks for all your advices anyway!


[Image: Screenshot-2020-08-28-mo-Ode-Player-3.png]
 Try it without the 192.168.1.22/ on the front of the path.  It should just be LaTaniere/music if I'm reading your config on the Synology end right.  You can tell what SMB levels are set on the Synology by pressing the "Advanced" button on the SMB setup page.
----------------
Robert
Find
Reply
gorgonetriton Offline
Junior Member
*
Posts: 8
Threads: 2
Joined: Aug 2020
Reputation: 0
#9
08-28-2020, 02:18 PM
Trying to enter the command in pi@moode ( I foolishly thought I could get out of this without any linux or coding knowledge, well maybe I was wrong...)
but I surely made a mistake in typing it?
pi@moode:~ $ smbtree ?
or pi@moode:~ $ smbtree -b -N  like in TheOldPresbyope post?


[Image: Screenshot-2020-08-28-pi-moode-Shell-In-A-Box.png]

Thank you for your support, I always have the solution of connecting a usb drive in the Signature Player, but it would be sweet to resolve that problem!
Regards
Find
Reply
gorgonetriton Offline
Junior Member
*
Posts: 8
Threads: 2
Joined: Aug 2020
Reputation: 0
#10
08-28-2020, 02:35 PM
WAIT WAIT WAIT!
@the_bertrum  you found it! I'm dancing in my living-room right now, it's working!
Thank you all so much for your help Heart 
Regards
Find
Reply


Forum Jump: