Stuck on gpio pin clear-load-play-list

[avior]

hi

when i do this "  mpc,load, Mp3 "  it works and load the new play list but can,t get it play and clear the old list 

I tried this as well but don`t seem to work

mpc,clear,load, Mp3 ,play
mpc,clear, mpc,load,Mp3, play

any ideas

thanks

[Tim Curtis]

Put the commands in a script file /home/pi/myscript.sh

mpc clear
mpc load Mp3
mpc play

Then specify the script file in the CMD field

/home/pi/myscript.sh

Remember to mark the script file as executable
sudo chmod +x /home/pi/myscript.sh

And put a shebang as the first line
#!/bin/bash

[avior]

Put the commands in a script file /home/pi/myscript.sh

mpc clear
mpc load Mp3
mpc play

Then specify the script file in the CMD field

/home/pi/myscript.sh

Remember to mark the script file as executable
sudo chmod +x /home/pi/myscript.sh

And put a shebang as the first line
#!/bin/bash

Thank you for your reply Tim

i am bit confused  I have 2 play list one call "Radio" and the other call "MP3"
I see you shown me how to do myscript    but how would i go back to "Radio" playlist
if i press the second button  would i have to make another myscript to go back to Radio

[Tim Curtis]

You could have the script accept an input argument.

myscript.sh Mp3
myscript.sh Radio

In the script $1 represents the first input argument. You would use the command below instead of mpc load Mp3

mpc load $1

Button 1 CMD field = /home/pi/myscript.sh,Mp3
Button 2 CMD field = /home/pi/myscript.sh,Radio

[avior]

You could have the script accept an input argument.

myscript.sh Mp3
myscript.sh Radio

In the script $1 represents the first input argument. You would use the command below instead of mpc load Mp3

mpc load $1

Button 1 CMD field = /home/pi/myscript.sh,Mp3
Button 2 CMD field = /home/pi/myscript.sh,Radio

Brilliant Tim got it to work