Roonbridge

[rkos72]

Has anyone managed to install RoonBridge in Moode 9.0.1?

I get the error message:
./roonbridge-installer-linuxarmv8.sh: 1: cannot open html: No such file
./roonbridge-installer-linuxarmv8.sh: 2: Syntax error: redirection unexpected

[rkos72]

Has anyone managed to install RoonBridge in Moode 9.0.1?

I get the error message:
./roonbridge-installer-linuxarmv8.sh: 1: cannot open html: No such file
./roonbridge-installer-linuxarmv8.sh: 2: Syntax error: redirection unexpected

I was able to solve the main problem myself. I noticed that the downloaded installer did not contain the content it should. It didn't matter whether I used wget or curl. On other computers, Linux and Windows, the correct installer could be downloaded.

Now it gets a bit strange: I then uploaded the correct installer to our own server. Well, when I downloaded it, the content was also not correct. Then I shortened the original file name to roonbr.sh, and hey presto, it worked...

Roonbridge was then installed. The service, however, gave an error message. As a result, Roonbridge is currently not starting automatically. I still have to take care of that...

[Tim Curtis]

Right. It looks like the instructions at https://help.roonlabs.com/portal/en/kb/a...l#Overview are broken. Maybe someone should send them a trouble ticket.

This command work for me

Code:

wget http://download.roonlabs.com/builds/roonbridge-installer-linuxarmv8.sh

Code:

pi@moode9:~ $ wget http://download.roonlabs.com/builds/roonbridge-installer-linuxarmv8.sh
--2024-06-14 07:28:53--  http://download.roonlabs.com/builds/roonbridge-installer-linuxarmv8.sh
Resolving download.roonlabs.com (download.roonlabs.com)... 161.35.186.180
Connecting to download.roonlabs.com (download.roonlabs.com)|161.35.186.180|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://download.roonlabs.net/builds/roonbridge-installer-linuxarmv8.sh [following]
--2024-06-14 07:28:53--  http://download.roonlabs.net/builds/roonbridge-installer-linuxarmv8.sh
Resolving download.roonlabs.net (download.roonlabs.net)... 104.22.14.70, 104.22.15.70, 172.67.14.113, ...
Connecting to download.roonlabs.net (download.roonlabs.net)|104.22.14.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16680 (16K) [text/x-sh]
Saving to: ‘roonbridge-installer-linuxarmv8.sh’

roonbridge-installer-linuxarmv8.sh    100%[=========================================================================>]  16.29K  --.-KB/s    in 0.02s  

2024-06-14 07:28:54 (962 KB/s) - ‘roonbridge-installer-linuxarmv8.sh’ saved [16680/16680]

And here's the script

Code:

pi@moode9:~ $ cat roonbridge-installer-linuxarmv8.sh
#!/bin/bash

# blow up on non-zero exit code
set -e

# these are replaced by build.sh
PACKAGE_NAME=RoonBridge
ARCH=armv8
PACKAGE_URL=https://download.roonlabs.net/builds/RoonBridge_linuxarmv8.tar.bz2
PACKAGE_FILE=${PACKAGE_NAME}_linux${ARCH}.tar.bz2
PACKAGE_NAME_LOWER=`echo "$PACKAGE_NAME" | tr "[A-Z]" "[a-z]"`

TMPDIR=`mktemp -d`
MACHINE_ARCH=`uname -m`
OK=0

CLEAN_EXIT=0

# for colorization
ESC_SEQ="\033["
COL_RESET=$ESC_SEQ"39;49;00m"
COL_RED=$ESC_SEQ"31;01m"
COL_GREEN=$ESC_SEQ"32;01m"
COL_YELLOW=$ESC_SEQ"33;01m"
COL_BLUE=$ESC_SEQ"34;01m"
COL_MAGENTA=$ESC_SEQ"35;01m"
COL_CYAN=$ESC_SEQ"36;01m"
COL_BOLD=$ESC_SEQ"1m"

function hr {
   echo -e "${COL_BOLD}--------------------------------------------------------------------------------------${COL_RESET}"
}

function clean_up {
   rm -Rf $TMPDIR
   if [ x$CLEAN_EXIT != x1 ]; then
       echo ""
       hr
       echo ""
       echo -e "${COL_BOLD}${COL_RED}The $PACKAGE_NAME installer did not complete successfully.${COL_RESET}"
       echo ""
       echo "If you are not sure how to proceed, please check out:"
       echo ""
       echo " - Roon Labs Community            https://community.roonlabs.com/c/support"
       echo " - Roon Labs Knowledge Base       https://kb.roonlabs.com/LinuxInstall"
       echo ""
       hr
       echo ""
   fi
}
trap clean_up EXIT

function install {
   #
   # Print banner/message
   #
   echo ""
   hr
   echo ""
   echo -e "${COL_BOLD}Welcome to the $PACKAGE_NAME installer${COL_RESET}"
   echo ""
   echo "This installer sets up $PACKAGE_NAME to run on linux with the following settings:"
   echo ""
   echo " - $PACKAGE_NAME will be installed in /opt/$PACKAGE_NAME"
   echo " - $PACKAGE_NAME's data will be stored in /var/roon/$PACKAGE_NAME"
   echo " - $PACKAGE_NAME will be configured to run as a system service"
   echo " - $PACKAGE_NAME will run as root"
   echo ""
   echo "These settings are suitable for turning a dedicated or semi-dedicated device"
   echo "into an appliance that runs $PACKAGE_NAME"
   echo ""
   echo "If you want customize how $PACKAGE_NAME is installed, see:"
   echo ""
   echo "   http://kb.roonlabs.com/LinuxInstall"
   echo ""
   hr
   echo ""


   #
   # Check for linux (in case someone runs on OS X, Cygwin, BSD, etc)
   #
   case `uname -s` in
       Linux)
           ;;
       *)
           echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This package is intended for Linux platforms. It is not compatible with your machine. Exiting."
           ;;
   esac

   #
   # Check for proper architecture
   #
   case "$MACHINE_ARCH" in
       armv7*)
           if [ x$ARCH = xarmv7hf ]; then OK=1; fi
           ;;
       aarch64*)
           if [ x$ARCH = xarmv8 ]; then OK=1; fi
           if [ x$ARCH = xarmv7hf ]; then OK=1; fi
           ;;
       x86_64*)
           if [ x$ARCH = xx64 ]; then OK=1; fi
           ;;
       i686*)
           if [ x$ARCH = xx86 ]; then OK=1; fi
           ;;
   esac

   #
   # Check for root privileges
   #
   if [ x$UID != x0 ]; then
       echo ""
       echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This installer must be run with root privileges. Exiting."
       echo ""
       exit 2
   fi

   #
   # Check for ffmpeg/avconv
   #

   if [ x$OK != x1 ]; then
       echo ""
       echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This package is intended for $ARCH platforms. It is not compatible with your machine. Exiting."
       echo ""
       exit 3
   fi

   function confirm_n {
       while true; do
           read -p "$1 [y/N] " yn
           case $yn in
               [Yy]* )
                   break
                   ;;
               "")
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               [Nn]* )
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               * ) echo "Please answer yes or no.";;
           esac
       done
   }

   function confirm {
       while true; do
           read -p "$1 [Y/n] " yn
           case $yn in
               "")
                   break
                   ;;
               [Yy]* )
                   break
                   ;;
               [Nn]* )
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               * ) echo "Please answer yes or no.";;
           esac
       done
   }

   #
   # Double-check with user that this is what they want
   #
   confirm "Do you want to install $PACKAGE_NAME on this machine?"

   echo ""
   echo "Downloading $PACKAGE_FILE to $TMPDIR/$PACKAGE_FILE"
   echo ""
   curl -L -# -o "$TMPDIR/$PACKAGE_FILE" "$PACKAGE_URL"

   echo ""
   echo -n "Unpacking ${PACKAGE_FILE}..."
   cd $TMPDIR
   tar xf "$PACKAGE_FILE"
   echo "Done"

   if [ ! -d "$TMPDIR/$PACKAGE_NAME" ]; then
       echo "Missing directory: $TMPDIR/$PACKAGE_NAME. This indicates a broken package."
       exit 5
   fi

   if [ ! -f "$TMPDIR/$PACKAGE_NAME/check.sh" ]; then
       echo "Missing $TMPDIR/$PACKAGE_NAME/check.sh. This indicates a broken package."
       exit 5
   fi

   $TMPDIR/$PACKAGE_NAME/check.sh

   if [ -e /opt/$PACKAGE_NAME ]; then
       hr
       echo ""
       echo -e "${COL_RED}${COL_BOLD}Warning:${COL_RESET} The /opt/$PACKAGE_NAME directory already exists."
       echo ""
       echo "This usually indicates that $PACKAGE_NAME was installed previously on this machine. The previous"
       echo "installation must be deleted before the installation can proceed."
       echo ""
       echo "Under normal circumstances, this directory does not contain any user data, so it should be safe to delete it."
       echo ""
       hr
       echo ""
       confirm "Delete /opt/$PACKAGE_NAME and re-install?"
       rm -Rf /opt/$PACKAGE_NAME
   fi

   echo ""
   echo -n "Copying Files..."
   mv "$TMPDIR/$PACKAGE_NAME" /opt
   echo "Done"

   # set up systemd
   HAS_SYSTEMCTL=1; which systemctl >/dev/null || HAS_SYSTEMCTL=0

   if [ $HAS_SYSTEMCTL = 1 -a -d /etc/systemd/system ]; then
       SERVICE_FILE=/etc/systemd/system/${PACKAGE_NAME_LOWER}.service

       # stop in case it's running from an old install
       systemctl stop $PACKAGE_NAME_LOWER || true

       echo ""
       echo "Installing $SERVICE_FILE"

       cat > $SERVICE_FILE << END_SYSTEMD
[Unit]
Description=$PACKAGE_NAME
After=network-online.target

[Service]
Type=simple
User=root
Environment=ROON_DATAROOT=/var/roon
Environment=ROON_ID_DIR=/var/roon
ExecStart=/opt/$PACKAGE_NAME/start.sh
Restart=on-abort

[Install]
WantedBy=multi-user.target
END_SYSTEMD

       echo ""
       echo "Enabling service ${PACKAGE_NAME_LOWER}..."
       systemctl enable ${PACKAGE_NAME_LOWER}.service
       echo "Service Enabled"

       echo ""
       echo "Starting service ${PACKAGE_NAME_LOWER}..."
       systemctl start ${PACKAGE_NAME_LOWER}.service
       echo "Service Started"
   else
       echo ""

       SERVICE_FILE=/etc/init.d/${PACKAGE_NAME_LOWER}

       /etc/init.d/$PACKAGE_NAME_LOWER stop || true

       cat > $SERVICE_FILE << END_LSB_INIT
#!/bin/sh

### BEGIN INIT INFO
# Provides:          ${PACKAGE_NAME_LOWER}
# Required-Start:    \$network
# Required-Stop:     \$network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Runs ${PACKAGE_NAME}
### END INIT INFO

# Defaults
DAEMON_NAME="$PACKAGE_NAME"
DAEMON_EXECUTABLE="/opt/$PACKAGE_NAME/start.sh"
DAEMON_OPTIONS=""
DAEMON_HOMEDIR="/opt/$PACKAGE_NAME"
DAEMON_PIDFILE="/var/run/${PACKAGE_NAME_LOWER}.pid"
DAEMON_LOGFILE="/var/log/${PACKAGE_NAME_LOWER}.log"
INIT_SLEEPTIME="2"

export ROON_DATAROOT=/var/roon
export ROON_ID_DIR=/var/roon

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin

if test -f /lib/lsb/init-functions; then
   . /lib/lsb/init-functions
fi
if test -f /etc/init.d/functions; then
   . /etc/init.d/functions
fi

### DO NOT EDIT BELOW THIS POINT ###

is_running () {
   # Test whether pid file exists or not
   test -f \$DAEMON_PIDFILE || return 1

   # Test whether process is running or not
   read PID < "\$DAEMON_PIDFILE"
   ps -p \$PID >/dev/null 2>&1 || return 1

   # Is running
   return 0
}

root_only () {
   if [ "\$(id -u)" != "0" ]; then
       echo "Only root should run this operation"
       exit 1
   fi
}

run () {
   if is_running; then
       PID="\$(cat \$DAEMON_PIDFILE)"
       echo "Daemon is already running as PID \$PID"
       return 1
   fi

   cd \$DAEMON_HOMEDIR

   nohup \$DAEMON_EXECUTABLE \$DAEMON_OPTIONS >>\$DAEMON_LOGFILE 2>&1 &
   echo \$! > \$DAEMON_PIDFILE
   read PID < "\$DAEMON_PIDFILE"

   sleep \$INIT_SLEEPTIME
   if ! is_running; then
       echo "Daemon died immediately after starting. Please check your logs and configurations."
       return 1
   fi

   echo "Daemon is running as PID \$PID"
   return 0
}

stop () {
   if is_running; then
       read PID < "\$DAEMON_PIDFILE"
       kill \$PID
   fi
   sleep \$INIT_SLEEPTIME
   if is_running; then
       while is_running; do
           echo "waiting for daemon to die (PID \$PID)"
           sleep \$INIT_SLEEPTIME
       done
   fi
   rm -f "\$DAEMON_PIDFILE"
   return 0
}

case "\$1" in
   start)
       root_only
       log_daemon_msg "Starting \$DAEMON_NAME"
       run
       log_end_msg \$?
       ;;
   stop)
       root_only
       log_daemon_msg "Stopping \$DAEMON_NAME"
       stop
       log_end_msg \$?
       ;;
   restart)
       root_only
       \$0 stop && \$0 start
       ;;
   status)
       status_of_proc \
           -p "\$DAEMON_PIDFILE" \
           "\$DAEMON_EXECUTABLE" \
           "\$DAEMON_NAME" \
           && exit 0 \
           || exit \$?
       ;;
   *)
       echo "Usage: \$0 {start|stop|restart|status}"
       exit 1
       ;;
esac
END_LSB_INIT

       echo "wrote out file"
       chmod +x ${SERVICE_FILE}

       HAS_UPDATE_RC_D=1; which update-rc.d >/dev/null || HAS_UPDATE_RC_D=0
       HAS_CHKCONFIG=1; which chkconfig >/dev/null || HAS_CHKCONFIG=0

       if [ $HAS_UPDATE_RC_D = 1 ]; then
           echo ""
           echo "Enabling service ${PACKAGE_NAME_LOWER} using update-rc.d..."
           update-rc.d ${PACKAGE_NAME_LOWER} defaults
           echo "Service Enabled"
       elif [ $HAS_CHKCONFIG = 1 ]; then
           echo ""
           echo "Enabling service ${PACKAGE_NAME_LOWER} using chkconfig..."
           chkconfig --add ${PACKAGE_NAME_LOWER}
           echo "Service Enabled"
       else
           echo "Couldn't find a way to enable the init script"
           exit 1
       fi

       echo ""
       echo "Starting service ${PACKAGE_NAME_LOWER}..."
       $SERVICE_FILE stop >/dev/null 2>&1 || true
       $SERVICE_FILE start
       echo "Service Started"

       echo "Setting up $PACKAGE_NAME to run at boot using LSB scripts"
   fi

   CLEAN_EXIT=1

   echo ""
   hr
   echo ""
   echo "All Done! $PACKAGE_NAME should be running on your machine now".
   echo ""
   hr
   echo ""
}

function uninstall {
   #
   # Print banner/message
   #
   echo ""
   hr
   echo ""
   echo -e "${COL_BOLD}Welcome to the $PACKAGE_NAME uninstaller${COL_RESET}"
   echo ""
   echo "This removes $PACKAGE_NAME from your machine by doing the following:"
   echo ""
   echo " - deleting all files in /opt/$PACKAGE_NAME"
   echo " - removing $PACKAGE_NAME as a system service"
   echo ""
   echo "This uninstaller is only for systems that were installed using this installer script."
   echo "If you performed a custom install by hand, this is not for you."
   echo ""
   echo "   http://kb.roonlabs.com/LinuxInstall"
   echo ""
   hr
   echo ""


   #
   # Check for linux (in case someone runs on OS X, Cygwin, BSD, etc)
   #
   case `uname -s` in
       Linux)
           ;;
       *)
           echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This package is intended for Linux platforms. It is not compatible with your machine. Exiting."
           ;;
   esac

   #
   # Check for proper architecture
   #
   case "$MACHINE_ARCH" in
       armv7*)
           if [ x$ARCH = xarmv7hf ]; then OK=1; fi
           ;;
       aarch64*)
           if [ x$ARCH = xarmv8 ]; then OK=1; fi
           if [ x$ARCH = xarmv7hf ]; then OK=1; fi
           ;;
       x86_64*)
           if [ x$ARCH = xx64 ]; then OK=1; fi
           ;;
       i686*)
           if [ x$ARCH = xx86 ]; then OK=1; fi
           ;;
   esac

   #
   # Check for root privileges
   #
   if [ x$UID != x0 ]; then
       echo ""
       echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This installer must be run with root privileges. Exiting."
       echo ""
       exit 2
   fi

   if [ x$OK != x1 ]; then
       echo ""
       echo -e "${COL_RED}${COL_BLOLD}Error:${COL_RESET} This package is intended for $ARCH platforms. It is not compatible with your machine. Exiting."
       echo ""
       exit 3
   fi

   function confirm_n {
       while true; do
           read -p "$1 [y/N] " yn
           case $yn in
               [Yy]* )
                   break
                   ;;
               "")
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               [Nn]* )
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               * ) echo "Please answer yes or no.";;
           esac
       done
   }

   function confirm {
       while true; do
           read -p "$1 [Y/n] " yn
           case $yn in
               "")
                   break
                   ;;
               [Yy]* )
                   break
                   ;;
               [Nn]* )
                   CLEAN_EXIT=1
                   echo ""
                   echo "Ok. Exiting."
                   echo ""
                   exit 4
                   ;;
               * ) echo "Please answer yes or no.";;
           esac
       done
   }

   #
   # Double-check with user that this is what they want
   #
   confirm_n "Are you sure that you want to uninstall $PACKAGE_NAME on this machine?"

   # set up systemd
   HAS_SYSTEMCTL=1; which systemctl >/dev/null || HAS_SYSTEMCTL=0

   if [ $HAS_SYSTEMCTL = 1 -a -d /etc/systemd/system ]; then
       SERVICE_FILE=/etc/systemd/system/${PACKAGE_NAME_LOWER}.service

       echo ""
       echo "Stopping service $PACKAGE_NAME_LOWER"
       systemctl stop $PACKAGE_NAME_LOWER || true
       echo "Service Stopped"

       echo ""
       echo "Disabling service ${PACKAGE_NAME_LOWER}..."
       systemctl disable ${PACKAGE_NAME_LOWER}.service || true
       echo "Service Disabled"

       echo ""
       echo "Removing service file $SERVICE_FILE"
       rm -f $SERVICE_FILE

   else
       SERVICE_FILE=/etc/init.d/${PACKAGE_NAME_LOWER}

       echo ""
       echo "Stopping service ${PACKAGE_NAME_LOWER}..."
       $SERVICE_FILE stop >/dev/null 2>&1 || true
       echo "Service Stopped"

       echo ""
       echo "Removing service ${PACKAGE_NAME_LOWER}..."
       if [ $HAS_UPDATE_RC_D = 1 ]; then
           echo ""
           echo "Disabling service ${PACKAGE_NAME_LOWER} using update-rc.d..."
           update-rc.d ${PACKAGE_NAME_LOWER} remove
           echo "Service Disabled"
       elif [ $HAS_CHKCONFIG = 1 ]; then
           echo ""
           echo "Disabling service ${PACKAGE_NAME_LOWER} using chkconfig..."
           chkconfig --del ${PACKAGE_NAME_LOWER}
           echo "Service Disabled"
       else
           echo "Couldn't find a way to disable the init script"
           exit 0
       fi
       echo "Service Removed"

       echo ""
       echo "Removing service file $SERVICE_FILE"
       rm -f $SERVICE_FILE
   fi

   echo ""
   echo -n "Deleting all files in /opt/$PACKAGE_NAME"
   rm -Rf /opt/$PACKAGE_NAME

   CLEAN_EXIT=1

   echo ""
   hr
   echo ""
   echo "All Done! $PACKAGE_NAME should be uninstalled."
   echo ""
   hr
   echo ""
}


if [ x$1 == xuninstall ]; then
   uninstall
else
   install
fi
pi@moode9:~ $