Turn on Graphic EQ

[Britown53]

Hello,

I'm new to MoOde and am liking the performance so far. Version 9.0.6 is running on a RPi 5 8GB with a 250GB NVMe drive for FLAC files in the Argon NEO 5 NVMe case. I have the CamillaDSP 10-band EQ selected but it defaults to the flat curve. Are there MPD options I need to enable before I can turn the Graphic EQ options on?

Thanks!

[the_bertrum]

You can either edit the filters in the 10 band EQ in Camilla, or turn off Camilla and instead activate the Graphic EQ which has preset curves you can choose, and easy to understand sliders to alter the shape.

Camilla will give you greater control, but you'll need to understand frequencies and q values to use it.

[Tim Curtis]

CamillaDSP configs are edited using the Pipeline Editor. Turn it on in the CamillaDSP Config screen.

As @the_bertrum mentioned though the 10-band Parametric EQ (PEQ) config requires an understanding of how to setup the frequency bands.

[Britown53]

CamillaDSP configs are edited using the Pipeline Editor. Turn it on in the CamillaDSP Config screen.

As @the_bertrum mentioned though the 10-band Parametric EQ (PEQ) config requires an understanding of how to setup the frequency bands.

I turned off the CamillaDSP per your guidance and set the EQ accordingly. Thanks to both of you for your help!

Brian