Posts: 4
Threads: 1
Joined: Jul 2025
Reputation:
0
07-21-2025, 10:41 AM
(This post was last modified: 07-21-2025, 10:42 AM by Ambre47.)
Hi,
I am missing every first second of a track on start or between tracks. I have set audio on Hifiberry digi+ pro I connect with I2S to my DAC. The same problem occurs also with spdif. Does anyone knows, which settings I should use?
I am using;
Metrum Acoustics Ambre streamer
Metrum Acoustics dac3 Jade DAC
I only play music from my NAS
Regards,
Marcel
Posts: 15,039
Threads: 345
Joined: Mar 2018
Reputation:
628
Reboot and then post the entire contents of the startup log so people can better understand your configuration.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
Posts: 15,039
Threads: 345
Joined: Mar 2018
Reputation:
628
I don't see anything suspicious in the log except for the mount error and only 2 tracks indexed.
It could be some sort of incompatibility between the HifiBerry device and the Metrium device.
Posts: 4
Threads: 1
Joined: Jul 2025
Reputation:
0
I have found the problem, It is the MQA module in my DAC.
The module must detect whether or not MQA data is present
before deciding how to decode the music signal. It can happen that the first
second of music is muted because of this. This is not a fault, it is arranged
by the Meridian MQA software in the board.
I will remove the module,
Thanks for your input
Marcel
Posts: 15,039
Threads: 345
Joined: Mar 2018
Reputation:
628
Glad you were able to track down that issue :-)