Extend PEQ with low and high shelf filters

[PJVervoorn]

I use PEQ for some of my headphones, most of these contain Peak filters, but some of the filters that can be found (e.g. here: https://github.com/jaakkopasanen/AutoEq/...s/INDEX.md) contain low and/or high shelves.

An example:
   
It would be great if the PEQ would be extended with the low and high shelf filter types.

[Tim Curtis]

Try CamillaDSP. There is a sample V2-PEQ 10-Band configuration. Click the Filters tab where you can set the subtype for each freq band.

[PJVervoorn]

Try CamillaDSP. There is a sample V2-PEQ 10-Band configuration. Click the Filters tab where you can set the subtype for each freq band.

Thanks, I’m using CamillaDSP with convolution files, didn’t know it could do PEQ too.
Looking at https://github.com/HEnquist/camilladsp?t...v-file#iir it seems really easy to convert the headphone data to Camilla’s IIR format.

But, I don’t see a “Filters” tab in moode.
PLATFORM INFORMATION

• RaspiOS: 11.9 Bullseye 32-bit
  
• Linux kernel: 6.1.21 32-bit
  
• Pi model: Pi-Zero 2 W 1.0 512MB
  
• MPD version: 0.23.14
  

Could that be because it is the 32 bit version, originally installed on an RPI Zero W?

[Tim Curtis]

The Filters tab is in the CamillaDSP Pipeline editor.

[PJVervoorn]

Found. Thanks!