Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Official moOde 7.0.0 support thread
USBridgeSig without DAC  - sound disturbances/cuts
Hi All, I compered quality of 
sound of version 6.7.1 and 7.0. I found that in version 7 are very minor sound disturbances sometime from the beginning of the songs. For example, in song If you love somebody set them free from Sting from very beginning (after about 5 seconds) you can hear something like very little sound cut. Firstly I thought that this is my fault music recording but it is not. I tested also Volumio 2.799 with rpi 4.19.86 kernel and asix v2.0.0 driver- sound was also OK. Undecided
Reply
Library update will not add new albums

Hi,

I am a beginner user of ver. 700 for Usbbridge Faced with the problem of updating the library recorded on a USB flash drive. After updating the library by the phone, an inscription appears - "MTD error openMPDSock () failed". USB flash disappears from the menu. How to solve this problem?
Reply
If you are running the 64-bit kernel switch back to 32-bit.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
(12-23-2020, 01:46 PM)Tim Curtis Wrote: If you are running the 64-bit kernel switch back to 32-bit.

I changed kernel 64-bit to 32-bit. Alas, the problem persists.
Reply
Examine the MPD log. It will list every file that MPD was able to successfully index.


Code:
cat /var/log/mpd/log
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
Music 
(12-23-2020, 12:47 PM)karel631 Wrote: USBridgeSig without DAC  - sound disturbances/cuts
Hi All, I compered quality of 
sound of version 6.7.1 and 7.0. I found that in version 7 are very minor sound disturbances sometime from the beginning of the songs. For example, in song If you love somebody set them free from Sting from very beginning (after about 5 seconds) you can hear something like very little sound cut. Firstly I thought that this is my fault music recording but it is not. I tested also Volumio 2.799 with rpi 4.19.86 kernel and asix v2.0.0 driver- sound was also OK. Undecided

I haven't upgraded to 7.0.0 yet, will do it one of these days - or after the Snob2000 has finished   Big Grin
On previous versions I experimented with the Linux Audio Adjustments but honestly you could better ask for advice in the Sound quality forum because these adjustments shouldn't be necessary anymore as I understood (and some oppose against making the changes).
Reply
In the new moode 7.0 I can't find the option to display the track details (format, bit, etc.) under the cover. Has it been removed?
Reply
(12-23-2020, 11:49 AM)Tim Curtis Wrote:
(12-23-2020, 03:45 AM)vyenibahar Wrote: Hi! Enjoying version 7.0. I just had two observations for possible fix consideration when using an iPhone Xs iOS14.3/Chrome interface:
1) The play control buttons seem to be overlapping with artist name in full view. (Photo#1)
2) When auto switching from horizontal/landscape view to vertical view by flipping the phone, the vertical page is not filled in full (blank space from top to bottom on the right hand side taking ~20% of the width of the visible page) (Photo #2)
Regards.
Viktor

After opening moOde in the Browser navigate to the Browsers "Add to home screen" button and then tap "Add". This creates a bookmark on your Home screen that when opened will display moOde like an app without the Browser top and bottom bars.
Worked very nicely! Thank you Tim.
Reply
Tidal album covers not showing up in version 7.0.1 when using mconnect player (iOS) -> moode (on Allo USBridge Sig). It was working quite well on 6.7.1.
I hope this is a surmountable issue.

Regards.

Viktor
Reply
Have since 7.0 a problem with Spotify renderer (second moode device not updated is still working). Airplay ist working.  I have rebooted several times, also the switch and the DNS server. Any idea what else to look at ?

Thanks
Kai
----


Code:
S P O T I F Y   S E T T I N G S

Friendly name = SpotifyLiving
ALSA device = plughw:0
Bit rate        = 160
Initial volume = 10
Volume curve = Linear
Volume normalization = No
Normalization pregain = 0
Autoplay           = No
Resume MPD = No

M O O D E   S T A R T U P   L O G

20201223 220904 worker: -- Start
20201223 220904 worker: Successfully daemonized
20201223 220905 worker: Integrity check (passed)
20201223 220905 worker: File check (OK)
20201223 220905 worker: Session loaded
20201223 220905 worker: Debug logging (OFF)
20201223 220905 worker: -- Device
20201223 220905 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20201223 220905 worker: Configured: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | alsavol:0)
20201223 220905 worker: ALSA mixer actual (Digital)
20201223 220905 worker: ALSA Digital volume set to (0%)
20201223 220905 worker: -- System
20201223 220907 worker: Host     (moodeliving2)
20201223 220907 worker: moOde    (7.0.1 2020-12-23)
20201223 220907 worker: RaspiOS  (10.6)
20201223 220907 worker: Kernel   (5.4.77-v8+ #1371)
20201223 220907 worker: Platform (Pi-3B+ 1GB v1.3)
20201223 220907 worker: ARM arch (aarch64, 64-bit kernel)
20201223 220907 worker: MPD ver  (0.22.3_p0x3)
20201223 220907 worker: CPU gov  (ondemand)
20201223 220907 worker: USB boot enabled
20201223 220907 worker: File system not expanded yet
20201223 220907 worker: HDMI port off
20201223 220907 worker: -- Network
20201223 220907 worker: eth0 exists
20201223 220907 worker: IP addr (192.168.178.120)
20201223 220907 worker: Netmask (255.255.255.0)
20201223 220907 worker: Gateway (192.168.178.1)
20201223 220907 worker: Pri DNS (192.168.178.1)
20201223 220907 worker: Domain  (schug-ib.com)
20201223 220907 worker: wlan0 does not exist
20201223 220907 worker: -- Audio
20201223 220908 worker: MPD conf updated
20201223 220908 worker: ALSA outputs unmuted
20201223 220908 worker: ALSA card number (0)
20201223 220908 worker: Audio output (Audiophonics ES9028/9038 DAC)
20201223 220908 worker: Audio formats (S16_LE, S32_LE)
20201223 220908 worker: ALSA mixer name (Digital)
20201223 220908 worker: MPD volume control (hardware)
20201223 220908 worker: Hdwr volume controller exists
20201223 220908 worker: Max ALSA volume (100%)
20201223 220908 worker: Reset renderer active flags
20201223 220908 worker: -- MPD
20201223 220908 worker: MPD started
20201223 220908 worker: MPD accepting connections
20201223 220908 worker: Configure MPD outputs
20201223 220909 worker: MPD output 1 ALSA default (on)
20201223 220909 worker: MPD output 2 ALSA crossfeed (off)
20201223 220909 worker: MPD output 3 ALSA parametric eq (off)
20201223 220909 worker: MPD output 4 ALSA graphic eq (off)
20201223 220909 worker: MPD output 5 ALSA polarity inversion (off)
20201223 220909 worker: MPD output 6 ALSA bluetooth (off)
20201223 220909 worker: MPD output 7 HTTP stream (off)
20201223 220909 worker: MPD crossfade (off)
20201223 220909 worker: -- Feature availability
20201223 220909 worker: Source select (available)
20201223 220909 worker: Source select (source: MPD)
20201223 220909 worker: Source select (output: Audiophonics ES9028/9038 DAC)
20201223 220909 worker: Bluetooth (available)
20201223 220909 worker: Airplay renderer (available)
20201223 220909 worker: Airplay renderer (started)
20201223 220909 worker: Spotify renderer (available)
20201223 220909 worker: Spotify renderer (started)
20201223 220909 worker: Squeezelite renderer (available)
20201223 220909 worker: UPnP renderer (available)
20201223 220909 worker: DLNA server (available)
20201223 220909 worker: DLNA server (started)
20201223 220909 worker: UPnP browser (available)
20201223 220909 worker: GPIO button handler (available)
20201223 220909 worker: Stream recorder (n/a)
20201223 220909 worker: -- Music sources
20201223 220909 worker: USB sources (none attached)
20201223 220909 worker: NAS and UPnP sources (none configured)
Reply


Forum Jump: