Posts: 13,431
Threads: 305
Joined: Mar 2018
Reputation:
545
(03-14-2022, 11:21 AM)Tim Curtis Wrote: (03-14-2022, 10:34 AM)seipersei Wrote: Hi all,
My streamer is made of a Raspberry Pi 3A+ with IQAudio DAC Pro. I’ve been using it with Moode for about 6 months without issues. With 8.0.0 it works flawlessly for maybe 15 minutes, then it starts to slow down drastically and eventually I can’t connect to it at all. I’ve tried rebooting it, using different SD cards in case the old one was corrupted, removing scripts (I use a Python script to show the play/pause status as specified here) but with no success: every time it works for a little while and then it packs up. Sometimes it would come back to life after several reboots but only briefly.
I reverted back to the old version of moode (7.6.1) and it works without issues, so it looks like the problem is related to this new release.
The system info I was able to copy just before it stopped working again is this:
Code: S Y S T E M P A R A M E T E R S
moOde release = 8.0.0 2022-03-12
RaspiOS = 11.2
Linux kernel = 5.15.23-v7+ #1525
Platform = Pi-3A+ 1.0 512MB
Architecture = armv7l (32-bit)
System uptime = up 1 minute
Timezone = Europe/Rome
Current time = 2022-03-14 10:56:45
Host name = moode
Ethernet address = unassigned
Ethernet MAC = no adapter
WLAN address = 192.168.1.142
WLAN MAC = b8:27:eb:37:b4:6f
WLAN country = IT
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = not enabled
Warranty = OK
Root size = 15G
Root used = 21%
Root available = 12G
Root expand = expanded
Memory total = 487 MB
Memory free = 337 MB
Memory used = 150 MB
SoC temperature = 43.5°C
Throttled bitmask = 0x0
Throttled text = No throttling has occurred
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = Off
HDMI output = Off
LED state = 0,0
IP addr timeout = 90 (secs)
Ethernet check = No
USB auto-mounter = udisks-glue
SSH term server = On
PHP-FPM version = 7.4.28
NGINX version = 1.18.0
SQLite3 version = 3.34.1
Hostapd version = 2.9
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = IQaudIO Pi-DAC PRO
Interface = I2S
Mixer name = Digital
Hardware mixer = Yes
Supported formats = S16_LE, S24_LE, S32_LE
ALSA max volume = 100
ALSA output mode = Direct (hw)
ALSA loopback = Off
MPD max volume = 100
Volume step limit = 10
Display dB volume = Off
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.2.4-1.1+rpt2
SoX version = 0.1.3-4+rpi1
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = On
Spotify receiver = Off
Squeezelite = Off
RoonBridge = Not installed
UPnP client = On
DLNA server = Off
GPIO button handler = Off
Multiroom sender = Off
Multiroom receiver = Disabled
UPnP browser = Off
Auto-shuffle = Off
Ashuffle mode = Track
Ashuffle filter = None
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
CamillaDSP = off
MPD httpd = Off
Ignore CUE files = Yes
P R E F E R E N C E S
Appearance
----------------------
Theme = Default
Accent color = Herb
Alpha blend = 0.85
Adaptive background = No
Background image = No
Cover backdrop = Yes
Cover blur = 20px
Cover scale = 1.25
Renderer backdrop = No
Font size = Smaller
Playback
----------------------
Show Queue thumbs = Yes
Show Now-playing icon = Yes
Show CoverView playbar = Yes
Show extra metadata = album,genre,track,disc,date,composer,conductor,performer,encoded,comment
Search site = Google
Playback history log = No
Library
----------------------
One touch album = Play
One touch radio = Play
Albumview sort order = by Artist
Tagview sort order = by Artist
Recently added = 1 Week
Show sample rate = Badge
Cover search pri = Cover image file
Pixel ratio = 2
Thumbnail resolution = 600px,60
Thumbnail columns = 6/2 (Default)
Library (Advanced)
----------------------
Tag view genre = Genres
Tag view artist = Artist
Album key = Album@Artist (Default)
Include comment tag = No
Library filter = full_lib
Library filter str =
Ignore articles = a,an,the
Show tagview genres = Yes
Show tagview covers = Yes
Ellipsis limited text = No
UTF8 character filter = No
CoverView
----------------------
Automatic display = Never
Backdrop style = Gradient (Linear)
R A D I O M A N A G E R S E T T I N G S
Sort tag = Name
Group method = No grouping
Show moOde stations = No action
Show other stations = No action
M P D S E T T I N G S
Version = 0.23.5
Volume type = none
SoX resampling = disabled
Selective resampling = disabled
SoX quality = high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = no
Audio buffer = 32 (MB)
Output buffer size = 128 (MB)
Max playlist items = 16384
Input cache = 128 MB
B L U E T O O T H S E T T I N G S
Version = 5.55
Bluealsa = v3.0.0
Pairing agent = 1.0.0
Pi-Bluetooth = 0.1.18
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (µs)
A I R P L A Y S E T T I N G S
Version = 3.3.8
Friendly name = Stream Pi
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Version = 0.3.1
Friendly name = Moode Spotify
Bitrate (kbps) = 160
Format = S16
Dither = Automatic (Default)
Volume curve = log
Volume range (dB) = 60
Initial volume (%) = 0
Volume normalization = No
Method = dynamic
Gain type = auto
Pregain (dB) = 0
Threshold (dBFS) = -2
Attack (ms) = 5
Release (ms) = 100
Knee = 1
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.9.8-1317 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20220314 105529 worker: --
20220314 105529 worker: -- Start moOde 8 series
20220314 105529 worker: --
20220314 105529 worker: Successfully daemonized
20220314 105530 worker: File check (OK)
20220314 105531 worker: Session vacuumed
20220314 105531 worker: Session loaded
20220314 105531 worker: Debug logging (ON)
20220314 105531 worker: --
20220314 105531 worker: -- Audio debug
20220314 105531 worker: --
20220314 105531 worker: ALSA cards: (0:IQaudIODAC | 1:empty | 2:empty | 3:empty
20220314 105531 worker: MPD config: (0:IQaudIO Pi-DAC PRO | mixer:(Digital) | card:0)
20220314 105532 worker: ALSA mixer actual (Digital)
20220314 105532 worker: ALSA Digital volume set to (0%)
20220314 105532 worker: --
20220314 105532 worker: -- System
20220314 105532 worker: --
20220314 105534 worker: Host (moode)
20220314 105534 worker: moOde (8.0.0 2022-03-12)
20220314 105534 worker: RaspiOS (11.2)
20220314 105534 worker: Kernel (5.15.23-v7+ #1525)
20220314 105534 worker: Platform (Pi-3A+ 1.0 512MB)
20220314 105534 worker: ARM arch (armv7l, 32-bit)
20220314 105534 worker: MPD ver (0.23.5)
20220314 105534 worker: CPU gov (ondemand)
20220314 105534 worker: USB boot (not enabled yet)
20220314 105534 worker: File sys (expanded)
20220314 105534 worker: HDMI port (Off)
20220314 105534 worker: Sys LED0 (Off)
20220314 105534 worker: Sys LED1 (Off)
20220314 105534 worker: --
20220314 105534 worker: -- Network
20220314 105534 worker: --
20220314 105535 worker: eth0 adapter does not exist
20220314 105535 worker: eth0 address not assigned
20220314 105535 worker: wlan0 adapter exists
20220314 105535 worker: wlan0 country (IT)
20220314 105535 worker: wlan0 trying SSID (Infostrada-909B99)
20220314 105535 worker: IP addr (192.168.1.142)
20220314 105535 worker: Netmask (255.255.255.0)
20220314 105535 worker: Gateway (192.168.1.1)
20220314 105535 worker: Pri DNS (192.168.1.1)
20220314 105535 worker: Domain (home)
20220314 105535 worker: wlan0 power save disabled
20220314 105535 worker: --
20220314 105535 worker: -- Audio config
20220314 105535 worker: --
20220314 105536 worker: MPD conf updated
20220314 105536 worker: ALSA card number (0)
20220314 105536 worker: MPD audio output (IQaudIO Pi-DAC PRO)
20220314 105536 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20220314 105536 worker: ALSA mixer name (Digital)
20220314 105536 worker: MPD mixer type (fixed 0dB)
20220314 105536 worker: Hdwr volume controller exists
20220314 105536 worker: Max ALSA volume (100%)
20220314 105536 worker: ALSA output mode (Direct: hw)
20220314 105536 worker: ALSA loopback (Off)
20220314 105536 worker: Reset renderer active flags
20220314 105536 worker: CamillaDSP (off)
20220314 105536 worker: --
20220314 105536 worker: -- MPD startup
20220314 105536 worker: --
20220314 105537 worker: MPD started
20220314 105537 worker: MPD accepting connections
20220314 105537 worker: MPD output 1 ALSA Default (on)
20220314 105537 worker: MPD output 2 ALSA Bluetooth (off)
20220314 105537 worker: MPD output 3 HTTP Server (off)
20220314 105537 worker: MPD crossfade (off)
20220314 105538 worker: MPD ignore CUE files (yes)
20220314 105538 worker: --
20220314 105538 worker: -- Feature availability
20220314 105538 worker: --
20220314 105538 worker: Source select (available)
20220314 105538 worker: Source select (source: MPD)
20220314 105538 worker: Source select (output: IQaudIO Pi-DAC PRO)
20220314 105538 worker: Bluetooth (available)
20220314 105538 startAirplay(): (/usr/bin/shairport-sync -vvu -a "Stream Pi" -- -d _audioout > /var/log/shairport-sync.log 2>&1 &)
20220314 105538 worker: Airplay renderer (available: started)
20220314 105538 worker: Spotify renderer (available)
20220314 105538 worker: Squeezelite (available)
20220314 105538 worker: RoonBridge renderer (not installed)
20220314 105538 worker: Multiroom sender (available)
20220314 105538 worker: Multiroom receiver (available)
20220314 105538 worker: UPnP renderer (available: started)
20220314 105538 worker: DLNA server (available)
20220314 105538 worker: UPnP browser (available)
20220314 105538 worker: GPIO button handler (available)
20220314 105538 worker: Stream recorder (n/a)
20220314 105538 worker: --
20220314 105538 worker: -- Music sources
20220314 105538 worker: --
20220314 105538 worker: USB source (DRIVE)
20220314 105538 worker: NAS and UPnP sources (none configured)
20220314 105538 worker: --
20220314 105538 worker: -- Other
20220314 105538 worker: --
20220314 105538 worker: USB volume knob (Off)
20220314 105538 worker: Shellinabox SSH started
20220314 105538 worker: USB auto-mounter (udisks-glue)
20220314 105538 worker: Saved MPD vol level (0)
20220314 105538 worker: Preamp volume level (0)
20220314 105538 worker: MPD volume level (0) restored
20220314 105538 worker: ALSA Digital volume (100%)
20220314 105538 worker: Auto-play (Off)
20220314 105538 worker: Maintenance interval (120 minutes)
20220314 105538 worker: Screen saver activation (Never)
20220314 105538 worker: Session permissions (OK)
20220314 105538 worker: Watchdog started
20220314 105538 worker: Ready
20220314 105632 waitWorker(): Start (sys-config, w_active=0)
20220314 105632 waitWorker(): End (sys-config, w_active=0)
20220314 105641 waitWorker(): Start (sys-config, w_active=0)
20220314 105641 waitWorker(): End (sys-config, w_active=0)
Very odd. I have a 3A+ but won't be able to test till later this morning.
No issues on my end. Its a 3A+, no HAT, Bluetooth and Airplay turned on and a NAS share mounted and indexed.
Code: pi@moode:~ $ moodeutl -s
Gathering info...
S Y S T E M P A R A M E T E R S
moOde release = 8.0.0 2022-03-12
RaspiOS = 11.2
Linux kernel = 5.15.23-v7+ #1525
Platform = Pi-3A+ 1.0 512MB
Architecture = armv7l (32-bit)
System uptime = up 1 hour, 20 minutes
Timezone = America/Detroit
Current time = 2022-03-14 09:22:24
Posts: 6,025
Threads: 176
Joined: Apr 2018
Reputation:
235
(03-14-2022, 10:03 AM)Tim Curtis Wrote: (03-14-2022, 02:30 AM)Tim Curtis Wrote: (03-14-2022, 02:17 AM)MikeyFresh Wrote: I'm up and running with tracks playing from my DLNA/UPnP server at all PCM bit depths and sample rates, as well as DSD64 and 128.
One curious thing happened after I updated a few internet radio stations, and then tried to export a backup of that. It fails with both Safari and Chrome on macOS, I get dumped to a 404 error page and there is no stations.zip file in my downloads folder afterwards.
I can repro.
Will add to the BUG list to investigate.
It looks like a permissions bug on the stations.zip file. The location where it is temporarily stored before the download starts was changed in 8.
One observation though is that the Export/Import function in the Radio Manager is redundant to the Backup/Restore function in System Config which can easily be used for just the radio stations. The file it produces is also much simpler than the one from Radio Manager Export. It could for example be edited to bulk load stations.
I'm thinking we really don't need the Radio Manager Export/Import anymore.
I like the idea of consolidating similar functions in one place. That the new backup/restore also produces a file I don't have to work so hard to customize is a bonus.
Regards,
Kent
Posts: 63
Threads: 10
Joined: Apr 2018
Reputation:
2
Good morning,
I would first like to thank all for this wonderful project. I just updated to 8.0 without any problems. Two things became apparent:
1. Upon system “Restore” I cannot seem to add my user stations without getting a restore of the old list of moode stations. One does not seem to come without the other and I would like to try the new offerings. BTW my user stations are also flagged as “Favorites” (if that maters).
2. What ever happened to “Clear/Add”? I like it way better than “Clear play”.
Posts: 46
Threads: 9
Joined: Mar 2022
Reputation:
0
03-14-2022, 01:50 PM
(This post was last modified: 03-14-2022, 01:51 PM by Sunfish.)
Today I tried to upgrade from moOde 7.6.1 to 8.0.0.
Burned an image with Etcher. And selected the Allo Piano 2.1 dac. Tested for sound and it worked. Because I have an Allo Kali Reclocker I selected under driver options --> glb-mclk Enabled. After reboot no more sound. Reverting to Disabled did not solve the problem. Several restarts of my Raspberry Pi 3B+ still no sound to be heard.
Apparently it should work as the timer on the mainscreen progresses. I've tried all kind of settings, including volume settings (software, hardware etc), but no sound to be heared. Also reburning the image on the same SD did not work. Using a new SD did resolve the problem shortly, but altering the setting under driver options seems to destroy something.
below a moodeutl -l log just after changing the setting from Disabled to enabled.
Code: Last login: Mon Mar 14 08:11:16 2022 from 192.168.1.100
pi@moode:~ $ moodeutl -l
20220314 081317 worker: --
20220314 081317 worker: -- Start moOde 8 series
20220314 081317 worker: --
20220314 081317 worker: Successfully daemonized
20220314 081317 worker: File check (OK)
20220314 081318 worker: Session vacuumed
20220314 081318 worker: Session loaded
20220314 081318 worker: Debug logging (OFF)
20220314 081318 worker: --
20220314 081318 worker: -- Audio debug
20220314 081318 worker: --
20220314 081318 worker: ALSA cards: (0:PianoDACPlus | 1:empty | 2:empty | 3:empty
20220314 081318 worker: MPD config: (0:Allo Piano 2.1 Hi-Fi DAC | mixer:(HDMI) | card:0)
20220314 081318 worker: ALSA mixer actual (Digital)
20220314 081318 worker: ALSA Digital volume set to (amixer: Unable to find simple control 'Digital',0)
20220314 081318 worker: --
20220314 081318 worker: -- System
20220314 081318 worker: --
20220314 081319 moode.php: MPD connect failed: cmd=(loadlib)
20220314 081319 moode.php: MPD connect failed: cmd=(lsinfo)
20220314 081320 worker: Host (moode)
20220314 081320 worker: moOde (8.0.0 2022-03-12)
20220314 081320 worker: RaspiOS (11.2)
20220314 081320 worker: Kernel (5.15.23-v7+ #1525)
20220314 081320 worker: Platform (Pi-3B+ 1.3 1GB)
20220314 081320 worker: ARM arch (armv7l, 32-bit)
20220314 081320 worker: MPD ver (0.23.5)
20220314 081320 worker: CPU gov (ondemand)
20220314 081320 worker: USB boot (enabled)
20220314 081320 worker: File sys (expanded)
20220314 081320 worker: HDMI port (On)
20220314 081320 worker: Sys LED0 (On)
20220314 081320 worker: Sys LED1 (On)
20220314 081320 worker: --
20220314 081320 worker: -- Network
20220314 081320 worker: --
20220314 081320 worker: eth0 adapter exists
20220314 081320 worker: eth0 wait for address (No)
20220314 081320 worker: IP addr (192.168.1.185)
20220314 081320 worker: Netmask (255.255.255.0)
20220314 081321 worker: Gateway (192.168.1.1)
20220314 081321 worker: Pri DNS (192.168.1.177)
20220314 081321 worker: Domain ()
20220314 081321 worker: wlan0 adapter exists
20220314 081321 worker: wlan0 country (US)
20220314 081321 worker: wlan0 SSID is blank
20220314 081321 worker: wlan0 AP mode not started (eth0 active)
20220314 081321 worker: wlan0 address not assigned
20220314 081321 worker: wlan0 power save disabled
20220314 081321 worker: --
20220314 081321 worker: -- Audio config
20220314 081321 worker: --
20220314 081321 worker: MPD conf updated
20220314 081321 worker: ALSA card number (0)
20220314 081321 worker: MPD audio output (Allo Piano 2.1 Hi-Fi DAC)
20220314 081321 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20220314 081321 worker: ALSA mixer name (Digital)
20220314 081321 worker: MPD mixer type (software)
20220314 081321 worker: Hdwr volume controller not detected
20220314 081321 worker: ALSA output mode (Default: plughw)
20220314 081321 worker: ALSA loopback (Off)
20220314 081322 worker: Piano 2.1 output mode (2.0)
20220314 081326 worker: Piano 2.1 initialized
20220314 081326 worker: Reset renderer active flags
20220314 081327 worker: CamillaDSP (off)
20220314 081327 worker: --
20220314 081327 worker: -- MPD startup
20220314 081327 worker: --
20220314 081327 worker: MPD started
20220314 081327 worker: MPD accepting connections
20220314 081327 worker: MPD output 1 ALSA Default (on)
20220314 081327 worker: MPD output 2 ALSA Bluetooth (off)
20220314 081327 worker: MPD output 3 HTTP Server (off)
20220314 081327 worker: MPD crossfade (off)
20220314 081327 worker: MPD ignore CUE files (yes)
20220314 081327 worker: --
20220314 081327 worker: -- Feature availability
20220314 081327 worker: --
20220314 081327 worker: Source select (available)
20220314 081327 worker: Source select (source: MPD)
20220314 081327 worker: Source select (output: Allo Piano 2.1 Hi-Fi DAC)
20220314 081327 worker: Bluetooth (available)
20220314 081327 worker: Airplay renderer (available)
20220314 081327 worker: Spotify renderer (available)
20220314 081327 worker: Squeezelite (available)
20220314 081327 worker: RoonBridge renderer (not installed)
20220314 081327 worker: Multiroom sender (available)
20220314 081327 worker: Multiroom receiver (available)
20220314 081327 worker: UPnP renderer (available)
20220314 081327 worker: DLNA server (available)
20220314 081327 worker: UPnP browser (available)
20220314 081327 worker: GPIO button handler (available)
20220314 081327 worker: Stream recorder (n/a)
20220314 081327 worker: --
20220314 081327 worker: -- Music sources
20220314 081327 worker: --
20220314 081327 worker: USB sources (none attached)
20220314 081327 worker: NAS and UPnP sources (none configured)
20220314 081327 worker: --
20220314 081327 worker: -- Other
20220314 081327 worker: --
20220314 081327 worker: USB volume knob (Off)
20220314 081327 worker: USB auto-mounter (udisks-glue)
20220314 081327 worker: Saved MPD vol level (0)
20220314 081327 worker: Preamp volume level (0)
20220314 081327 worker: MPD volume level (0) restored
20220314 081327 worker: ALSA volume level (None)
20220314 081327 worker: Auto-play (Off)
20220314 081327 worker: Maintenance interval (120 minutes)
20220314 081327 worker: Screen saver activation (Never)
20220314 081327 worker: Session permissions (OK)
20220314 081327 worker: Watchdog started
20220314 081327 worker: Ready
20220314 081410 worker: Job mpdcfg
20220314 081411 watchdog: Error: MPD restarted (check syslog for errors)
20220314 081411 worker: Job mpdcfg: devchg|mixchg (0|0), alsavol (none), playstate (playing)
Posts: 6,025
Threads: 176
Joined: Apr 2018
Reputation:
235
03-14-2022, 01:55 PM
(This post was last modified: 03-14-2022, 02:18 PM by TheOldPresbyope.
Edit Reason: ETA: WiFi
)
(03-14-2022, 01:27 PM)Tim Curtis Wrote: (03-14-2022, 11:21 AM)Tim Curtis Wrote: (03-14-2022, 10:34 AM)seipersei Wrote: Hi all,
My streamer is made of a Raspberry Pi 3A+ with IQAudio DAC Pro. I’ve been using it with Moode for about 6 months without issues. With 8.0.0 it works flawlessly for maybe 15 minutes, then it starts to slow down drastically and eventually I can’t connect to it at all. I’ve tried rebooting it, using different SD cards in case the old one was corrupted, removing scripts (I use a Python script to show the play/pause status as specified here) but with no success: every time it works for a little while and then it packs up. Sometimes it would come back to life after several reboots but only briefly.
I reverted back to the old version of moode (7.6.1) and it works without issues, so it looks like the problem is related to this new release.
The system info I was able to copy just before it stopped working again is this:
...
Very odd. I have a 3A+ but won't be able to test till later this morning.
No issues on my end. Its a 3A+, no HAT, Bluetooth and Airplay turned on and a NAS share mounted and indexed.
...
So far, I've installed moOde 8 on a Pi Zero 2 W, Pi 3A+, Pi 3B+, and Pi 4B (not the latest revision) and have yet to hit a snag. Caveat: first tests were with USB DACs only.
ETA: all hosts connected via WiFi to an AP on my LAN and thence to my NAS. No issues here.
Next up is my Compute Module 4, which is a bit more complicated since it's an eMMC-only model. If push comes to shove, I could dust off a Pi Zero W and a Pi 2B, but only under duress!
The 3A+ has been playing radio stations and Spotify tracks for better part of an hour.
No doubt there'll be other glitches besides the Radio Manager Export/Import issue, but nothing major has cropped here.
Regards,
Kent
Posts: 246
Threads: 15
Joined: Apr 2018
Reputation:
10
I can also confirm that after a fresh build of Moode 8 and a config restore from Moode 7.6.1 or, under Moode 8
1: creating a radio station
2: doing a system backup ticking all the boxes
3: attempting a system restore from same backup
that the user-created radio stations selection is disabled and am unable to enable it.
Fortunately I only had one.
Cheers,
Phil
Posts: 13,431
Threads: 305
Joined: Mar 2018
Reputation:
545
(03-14-2022, 12:12 PM)Tim Curtis Wrote: (03-14-2022, 11:55 AM)petfr Wrote: Hello , I think I have a bug to report . I have two Raspberry zero w with Moode . Version 7.6.1 was previously running on both of them. Have now written the one with the latest version. The Zero w also starts in AP mode , but can not longer find my router during the scan. However, routers in my neighborhood are found. The SSID of my Router is "TP-LINK_2B91 " .
My location is germany .
I have a Zero W.
I'll test later this morning to see what the scan reports in AP mode and whether it finds my Router.
No problem on Zero W listing my 2GHz SSID after a scan.
On a 3B+ the scan lists both my 2GHz SSID and 5GHz SSID.
Posts: 13,431
Threads: 305
Joined: Mar 2018
Reputation:
545
(03-14-2022, 01:44 PM)Macdelf Wrote: Good morning,
I would first like to thank all for this wonderful project. I just updated to 8.0 without any problems. Two things became apparent:
1. Upon system “Restore” I cannot seem to add my user stations without getting a restore of the old list of moode stations. One does not seem to come without the other and I would like to try the new offerings. BTW my user stations are also flagged as “Favorites” (if that maters).
2. What ever happened to “Clear/Add”? I like it way better than “Clear play”.
There is a new Clear Queue item in the ... menus on the Playbar and in Playback view. The idea was to simplify the context menus by removing Clear/Add which is prolly not that frequently used. The equivalent of Clear/Add in moOde 8 is Clear Queue followed by Add.
For the radio station issue run the command below and let me know if it returns anything.
Code: moodeutl -q "select * from cfg_radio where id ='499'"
Posts: 6,025
Threads: 176
Joined: Apr 2018
Reputation:
235
Has anyone else noticed how often reports of difficulty connecting to a NAS turn out to be for systems using a WiFi router's file-sharing capability as the NAS. This has been true for a long time with respect to Fritz!Box routers and now we see the GL-MT300N-V2 as well. As my grandmother used to say, "there's many a slip 'twixt the cup and the lip."
@ jonners
To rule out any dns vs mdns silliness, what happens when you try manually entering host/share either as GL-MT300N-V2.local/sda1 or as <router IP address>/sda1?
Were the router on my network, for example, the latter would be 10.0.0.1/sda1
I looked at https://docs.gl-inet.com/en/3/tutorials/file_sharing/ and didn't see anything out of the ordinary. The router seems to be based on OpenWRT which is a venerable piece of kit. The documentation is heavily skewed toward MS-Windows users, though, which can be annoying.
Regards,
Kent
Posts: 63
Threads: 10
Joined: Apr 2018
Reputation:
2
(03-14-2022, 02:36 PM)Tim Curtis Wrote: (03-14-2022, 01:44 PM)Macdelf Wrote: Good morning,
I would first like to thank all for this wonderful project. I just updated to 8.0 without any problems. Two things became apparent:
1. Upon system “Restore” I cannot seem to add my user stations without getting a restore of the old list of moode stations. One does not seem to come without the other and I would like to try the new offerings. BTW my user stations are also flagged as “Favorites” (if that maters).
2. What ever happened to “Clear/Add”? I like it way better than “Clear play”.
There is a new Clear Queue item in the ... menus on the Playbar and in Playback view. The idea was to simplify the context menus by removing Clear/Add which is prolly not that frequently used. The equivalent of Clear/Add in moOde 8 is Clear Queue followed by Add.
For the radio station issue run the command below and let me know if it returns anything.
Code: moodeutl -q "select * from cfg_radio where id ='499'"
I did that from the version of 8 I created that had my favorites in it but with the default radio overwritten to 7.4 with the restore function. I got no output. Just a prompt.
I have about eight stations and can re add them manually if needed.
|
