Roon bridge on 8.1.1. 64bit

[hansStahlhelm]

Hello,

just put the 8.1.1. 64bit image (image_2022-06-24-moode-r811-arm64-lite.zip) on a SD-card, fired up moOde and restored settings from backup. I then wanted to install Roon bridge as per https://moodeaudio.org/forum/showthread.php?tid=3200

However, it does not seem to work. Any help is appreciated (might want to try the 32bit version but wait for confirmation).

Here's the SSH output:

Code:

Downloading RoonBridge_linuxarmv7hf.tar.bz2 to /tmp/tmp.jkdutyatOo/RoonBridge_linuxarmv7hf.tar.bz2

######################################################################### 100.0%

Unpacking RoonBridge_linuxarmv7hf.tar.bz2...Done

Checking to see if RoonBridge can run on this machine

   Checking for Binary Compatibility                            [ FAILED ]
   Checking for ALSA Libraries                                  [ FAILED ]

STATUS: FAILED

These issues must be addressed before RoonBridge will run on this machine.

For more information on how to address this, see:

  http://kb.roonlabs.com/LinuxInstall


--------------------------------------------------------------------------------------

The RoonBridge installer did not complete successfully.

If you are not sure how to proceed, please check out:

- Roon Labs Community            https://community.roonlabs.com/c/support
- Roon Labs Knowledge Base       https://kb.roonlabs.com/LinuxInstall

[TheOldPresbyope]

Hello,

just put the 8.1.1. 64bit image (image_2022-06-24-moode-r811-arm64-lite.zip) on a SD-card, fired up moOde and restored settings from backup. I then wanted to install Roon bridge as per https://moodeaudio.org/forum/showthread.php?tid=3200

However, it does not seem to work. Any help is appreciated (might want to try the 32bit version but wait for confirmation).

Here's the SSH output:

Code:

Downloading RoonBridge_linuxarmv7hf.tar.bz2 to /tmp/tmp.jkdutyatOo/RoonBridge_linuxarmv7hf.tar.bz2

######################################################################### 100.0%

Unpacking RoonBridge_linuxarmv7hf.tar.bz2...Done

Checking to see if RoonBridge can run on this machine

   Checking for Binary Compatibility                            [ FAILED ]
   Checking for ALSA Libraries                                  [ FAILED ]

STATUS: FAILED

These issues must be addressed before RoonBridge will run on this machine.

For more information on how to address this, see:

  http://kb.roonlabs.com/LinuxInstall


--------------------------------------------------------------------------------------

The RoonBridge installer did not complete successfully.

If you are not sure how to proceed, please check out:

- Roon Labs Community            https://community.roonlabs.com/c/support
- Roon Labs Knowledge Base       https://kb.roonlabs.com/LinuxInstall

You have the installer for the 32-bit version of RoonBridge.

Try https://download.roonlabs.net/builds/roo...uxarmv8.sh instead.

Regards,
Kent

[hansStahlhelm]

appreciate the swift support and thanks for this great piece of software to the team!

[chaos333]

mark,
some time ago i met the same alsa problem while still not solution yet.
i will try as suggested here and see what might comes out.