Bluetooth Headphones

[wmoecke]

In general it should work out of the box: I tried it with my Sony WH-1000XM2 and it worked fine. Maybe one hint: headphones normaly only connect to one source. So I needed to disconnect the headphones from my iPhone and then put in visible mode again.
Then moode-bt -> scan device, moode-bt-> pair device , moode-bt-> connect device and finally moode-bt -> switch mdp from local to bt

Another hint: I have disabled the volume during my S/PDIF connection to the speakers.So when switching to BT, the volume control switch to software back and is down to zero and needed to be increased to hear something.

Hi, I cannot get audio from moode to my BT headphones. I did all of the above, the phones are paired, then connected, then the UI says "Bluethooth". When I hit the play button, audio still comes out of the speakers, not the bluetooth headset (although it is reported as connected and the headphones also report as connected).

When I pair a BT audio source (such as a CD player with BT capability) it connects to moode and when I get the UI saying "Bluetooth" moode reproduces the audio coming from the source. But not the other way around.

I don't know what else to do.

Before leaving the Bluez Config page did you take the final step of setting MPD Audio output -> Bluetooth?

Attached is a screen-capture example where I had scanned, paired with, and connected to a Plantronics headset I happened to have on hand. Once connected, I switched the output to Bluetooth.

Regards,
Kent

I only see the first option, the other dropdowns don't appear.

From your screenshot I take you must be in a version higher than mine or something, because I am running 4.2 or 4.1 (not sure). I guess this is a feature introduced afterwards or something.