(06-19-2021, 06:29 AM)raalffi Wrote: I changed my router's DNS address to 1.1.1.1 and I have had it for many months. Many computers and devices use this DNS at my home and there are no problems. Rpi also has no problem when I set the audio card to SLAVE MODE ENABLE. After that, when I set it to SLAVE MODE DISABLE, communication also disappears in the LAN, and here the DNS address is not needed. It looks like the problem is hidden somewhere deeper in the Moode system. At least in the hardware configuration with the Allo Boss Dac card working in MASTER mode.
But to be sure, I changed the DNS address to the standard one.
pi@moode:~ $ moodeutl -l
20210618 182052 worker: -- Start
20210618 182052 worker: Successfully daemonized
20210618 182052 worker: Integrity check (passed)
20210618 182053 worker: File check (OK)
20210618 182053 worker: Session vacuumed
20210618 182053 worker: Session loaded
20210618 182053 worker: Debug logging (ON)
20210618 182054 worker: -- Audio debug
20210618 182054 worker: ALSA cards: (0:BossDAC | 1:empty | 2:empty | 3:empty
20210618 182054 worker: MPD config: (0:Allo Boss DAC | mixer: (Digital) | card:0)
20210618 182054 worker: ALSA mixer actual (Digital)
20210618 182054 worker: ALSA Digital volume set to (0%)
20210618 182054 worker: -- System
20210618 182056 worker: Host (moode)
20210618 182056 worker: moOde (7.2.1 2021-05-06)
20210618 182056 worker: RaspiOS (10.6)
20210618 182056 worker: Kernel (5.4.77-v7+ #1371)
20210618 182056 worker: Platform (Pi-3B 1.2 1GB)
20210618 182056 worker: ARM arch (armv7l, 32-bit kernel)
20210618 182056 worker: MPD ver (0.22.6_p0x3)
20210618 182056 worker: CPU gov (ondemand)
20210618 182056 worker: USB boot not enabled yet
20210618 182056 worker: File system not expanded yet
20210618 182056 worker: HDMI port on
20210618 182056 worker: -- Network
20210618 182056 worker: eth0 exists
20210618 182056 worker: eth0 wait 0 for IP address
20210618 182059 worker: eth0 wait 1 for IP address
20210618 182102 worker: eth0 wait 2 for IP address
20210618 182105 worker: eth0 wait 3 for IP address
20210618 182108 worker: eth0 wait 4 for IP address
20210618 182111 worker: eth0 address not assigned
20210618 182111 worker: wlan0 exists
20210618 182111 worker: wifi country (US)
20210618 182111 worker: wlan0 trying SSID (WiFi2630Dol)
20210618 182111 worker: IP addr (192.168.1.5)
20210618 182112 worker: Netmask (255.255.255.0)
20210618 182112 worker: Gateway (192.168.1.1)
20210618 182112 worker: Pri DNS (192.168.1.1)
20210618 182112 worker: Domain (domain_not_set.invalid)
20210618 182117 worker: Pi integrated wlan0 power save disabled
20210618 182117 worker: -- Audio config
20210618 182118 worker: MPD conf updated
20210618 182118 worker: ALSA card number (0)
20210618 182118 worker: MPD audio output (Allo Boss DAC)
20210618 182118 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20210618 182118 worker: ALSA mixer name (Digital)
20210618 182118 worker: MPD volume control (software)
20210618 182118 worker: Hdwr volume controller exists
20210618 182118 worker: Max ALSA volume (100%)
20210618 182118 worker: ALSA loopback (Off)
20210618 182118 worker: Reset renderer active flags
20210618 182118 worker: CamillaDSP (off)
20210618 182118 worker: -- MPD startup
20210618 182118 worker: MPD started
20210618 182118 openMpdSocket(): error: connection failed (1) 111, Connection refused
20210618 182119 worker: MPD accepting connections
20210618 182119 worker: MPD output 1 ALSA Default (on)
20210618 182119 worker: MPD output 2 ALSA Bluetooth (off)
20210618 182119 worker: MPD output 3 HTTP Server (off)
20210618 182119 worker: MPD crossfade (off)
20210618 182119 worker: MPD ignore CUE files (yes)
20210618 182119 worker: -- Feature availability
20210618 182119 worker: Source select (available)
20210618 182119 worker: Source select (source: MPD)
20210618 182119 worker: Source select (output: Allo Boss DAC)
20210618 182119 worker: Bluetooth (available)
20210618 182119 worker: Airplay renderer (available)
20210618 182119 worker: Spotify renderer (available)
20210618 182119 worker: Squeezelite (available)
20210618 182119 worker: RoonBridge renderer (not installed)
20210618 182119 worker: UPnP renderer (available)
20210618 182119 worker: DLNA server (available)
20210618 182119 worker: UPnP browser (available)
20210618 182119 worker: GPIO button handler (available)
20210618 182119 worker: Stream recorder (n/a)
20210618 182119 worker: -- Music sources
20210618 182119 worker: USB sources (none attached)
20210618 182119 worker: NAS and UPnP sources (none configured)
20210618 182119 worker: -- Other
20210618 182119 worker: USB volume knob (Off)
20210618 182119 worker: Shellinabox SSH started
20210618 182119 worker: USB auto-mounter (udisks-glue)
20210618 182119 worker: LED0 (On)
20210618 182119 worker: LED1 (On)
20210618 182119 worker: Saved MPD vol level (0)
20210618 182119 worker: Preamp volume level (0)
20210618 182119 worker: MPD volume level (90) restored
20210618 182119 worker: ALSA Digital volume (100%)
20210618 182119 worker: Auto-play (Off)
20210618 182119 worker: Maintenance interval (3 hours)
20210618 182119 worker: Screen saver activation (Never)
20210618 182119 worker: Session permissions (OK)
20210618 182119 worker: Watchdog started
20210618 182119 worker: Ready
20210619 021241 waitWorker(): Start (sys-config, w_active=0)
20210619 021241 waitWorker(): End (sys-config, w_active=0)
pi@moode:~ $
Unfortunately, it did not help. I still can't have my card set to MASTER mode. I checked on another system and everything works fine.
Only there is no option to select the MASTER or SLAVE audio card operating mode. And so it is not known in what mode it works on that system.
I attach the log on SLAVE ENABLE. Everything works fine in this mode. I marked the changes I saw with the bold font
pi@moode:~ $ moodeutl -l
20210619 022803 worker: -- Start
20210619 022803 worker: Successfully daemonized
20210619 022803 worker: Integrity check (passed)
20210619 022804 worker: File check (OK)
20210619 022804 worker: Session vacuumed
20210619 022804 worker: Session loaded
20210619 022804 worker: Debug logging (ON)
20210619 022804 worker: -- Audio debug
20210619 022804 worker: ALSA cards: (0:BossDAC | 1:empty | 2:empty | 3:empty
20210619 022804 worker: MPD config: (0:Allo Boss DAC | mixer: (Digital) | card:0)
20210619 022804 worker: ALSA mixer actual (Digital)
20210619 022805 worker: ALSA Digital volume set to (0%)
20210619 022805 worker: -- System
20210619 022807 worker: Host (moode)
20210619 022807 worker: moOde (7.2.1 2021-05-06)
20210619 022807 worker: RaspiOS (10.6)
20210619 022807 worker: Kernel (5.4.77-v7+ #1371)
20210619 022807 worker: Platform (Pi-3B 1.2 1GB)
20210619 022807 worker: ARM arch (armv7l, 32-bit kernel)
20210619 022807 worker: MPD ver (0.22.6_p0x3)
20210619 022807 worker: CPU gov (ondemand)
20210619 022807 worker: USB boot not enabled yet
20210619 022807 worker: File system not expanded yet
20210619 022807 worker: HDMI port on
20210619 022807 worker: -- Network
20210619 022807 worker: eth0 exists
20210619 022807 worker: eth0 wait 0 for IP address
20210619 022810 worker: eth0 wait 1 for IP address
20210619 022813 worker: eth0 wait 2 for IP address
20210619 022816 worker: eth0 wait 3 for IP address
20210619 022819 worker: eth0 wait 4 for IP address
20210619 022822 worker: eth0 address not assigned
20210619 022822 worker: wlan0 exists
20210619 022822 worker: wifi country (US)
20210619 022822 worker: wlan0 trying SSID (WiFi2630Dol)
20210619 022822 worker: IP addr (192.168.1.5)
20210619 022822 worker: Netmask (255.255.255.0)
20210619 022822 worker: Gateway (192.168.1.1)
20210619 022822 worker: Pri DNS (192.168.1.1)
20210619 022822 worker: Domain (domain_not_set.invalid)
20210619 022822 worker: Pi integrated wlan0 power save disabled
20210619 022822 worker: -- Audio config
20210619 022823 worker: MPD conf updated
20210619 022823 worker: ALSA card number (0)
20210619 022823 worker: MPD audio output (Allo Boss DAC)
20210619 031013 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20210619 031013 worker: ALSA mixer name (Digital)
20210619 031013 worker: MPD volume control (software)
20210619 031013 worker: Hdwr volume controller exists
20210619 031013 worker: Max ALSA volume (100%)
20210619 031013 worker: ALSA loopback (Off)
20210619 031013 worker: Reset renderer active flags
20210619 031013 worker: CamillaDSP (off)
20210619 031013 worker: -- MPD startup
20210619 031013 worker: MPD started
20210619 031013 openMpdSocket(): error: connection failed (1) 111, Connection refused
20210619 031014 worker: MPD accepting connections
20210619 031014 worker: MPD output 1 ALSA Default (on)
20210619 031014 worker: MPD output 2 ALSA Bluetooth (off)
20210619 031014 worker: MPD output 3 HTTP Server (off)
20210619 031014 worker: MPD crossfade (off)
20210619 031014 worker: MPD ignore CUE files (yes)
20210619 031014 worker: -- Feature availability
20210619 031014 worker: Source select (available)
20210619 031014 worker: Source select (source: MPD)
20210619 031014 worker: Source select (output: Allo Boss DAC)
20210619 031014 worker: Bluetooth (available)
20210619 031014 worker: Airplay renderer (available)
20210619 031014 worker: Spotify renderer (available)
20210619 031014 worker: Squeezelite (available)
20210619 031014 worker: RoonBridge renderer (not installed)
20210619 031014 worker: UPnP renderer (available)
20210619 031014 worker: DLNA server (available)
20210619 031014 worker: UPnP browser (available)
20210619 031014 worker: GPIO button handler (available)
20210619 031014 worker: Stream recorder (n/a)
20210619 031014 worker: -- Music sources
20210619 031014 worker: USB sources (none attached)
20210619 031014 worker: NAS and UPnP sources (none configured)
20210619 031014 worker: -- Other
20210619 031014 worker: USB volume knob (Off)
20210619 031014 worker: Shellinabox SSH started
20210619 031014 worker: USB auto-mounter (udisks-glue)
20210619 031014 worker: LED0 (On)
20210619 031014 worker: LED1 (On)
20210619 031014 worker: Saved MPD vol level (0)
20210619 031014 worker: Preamp volume level (0)
20210619 031014 worker: MPD volume level (0) restored
20210619 031014 worker: ALSA Digital volume (100%)
20210619 031014 worker: Auto-play (Off)
20210619 031014 worker: Maintenance interval (3 hours)
20210619 031014 worker: Screen saver activation (Never)
20210619 031014 worker: Session permissions (OK)
20210619 031015 worker: Watchdog started
20210619 031015 worker: Ready
20210619 031058 waitWorker(): Start (snd-config, w_active=1)
20210619 031059 waitWorker(): Wait (1)
20210619 031100 worker: Job i2sdevice
20210619 031100 waitWorker(): Wait (2)
20210619 031100 waitWorker(): End (snd-config, w_active=0)
20210619 031115 waitWorker(): Start (sys-config, w_active=0)
20210619 031115 waitWorker(): End (sys-config, w_active=0
Just as in another thread wierdly, you've misunderstood how DNS works on your LAN, 1.1.1.1 is a public DNS service run by Google (as is also 8.8.8.8). It's a service for resolving names on the internet but they obviously wont be able to resolve the names on your LAN which will result in seemingly odd timeouts and issues with communication between the computers on your lan if your configure this on your computers' IP configurations.
The DNS address on your local IP configuration should normally be your router, i.e. the same as your gateway address.
The WAN DNS address is configured on your router for resolving names external to your network, i.e. the internet, that's where you'd enter your external DNS service address. Tip though... 1.1.1.1 & 8.8.8.8 might be faster than your ISP but why would you trust Google to log all your name lookups (i.e. potentially every web, email, download, torrent etc. connection)?
