I get essentially the same output.. (only with the device and it's mixer as appropriate) but no sound output and the level meters on the DAC do not respond indicating that nothing is being sent..or the volume is at zero.. but no volume settings work to change that software, hardware, or disabled.
I am baffled... especially as the same hardware worked previously. I will try a reinstall of MoOde and see what that brings.
Edit: Fresh install of MoOde and exactly the same problem. Fresh install of Pulseaudio-dlna and exactly the same problem. Giving up.
I am baffled... especially as the same hardware worked previously. I will try a reinstall of MoOde and see what that brings.
Code:
Input / Output
Source http://192.168.1.5:8080/dHlwZT0iYnJpZGdlIix1ZG49InV1aWQ6NWUyMTEwOTctNDY1OC01MTYxLWE2NjEtZGNhNjMyMDNiZmZjIg%3D%3D/stream.mp3
Encoded at Unknown
Decoded to 24 bit, 44.1 kHz, Stereo, 192 kbps
Output rate 32 bit, 44.1 kHz, Stereo, 2.822 Mbps
Output mode ALSA Default (plughw)
Output chain MPD -> plughw -> Device
DSP operations
Resample rate Off
Selective rate Off
Resample quality Off
CamillaDSP Off
Volume mixer Fixed (0dB output)
Audio Device
Device DIYINHK USB Audio 2.0
Mixer name DIYINHK USB Audio 2.0
Interface USB
Formats S16_LE, S32_LE, SPECIAL, DSD_U32_BE
Platform Pi-4B 1.1 4GBEdit: Fresh install of MoOde and exactly the same problem. Fresh install of Pulseaudio-dlna and exactly the same problem. Giving up.
----------
bob
bob
