09-25-2018, 07:50 PM
(09-25-2018, 06:55 PM)Tim Curtis Wrote: Please post details about your configuration including the output from System info after the issue occurs and I'll have a look.
Also post a sample of any errors that appear in the MPD log.
cat /var/log/mpd/log
the config is a RPI 3B with a HifiBerry Dac+ Pro.
S Y S T E M P A R A M E T E R S
Date and time = 2018-09-25 14:24:11
System uptime = up 1 hour, 32 minutes
Timezone = America/Chicago
moOde = Release 4.2 2018-07-11
Host name = moode
ETH0 IP = 192.168.1.19
ETH0 MAC = b8:27:eb:70:34:5b
WLAN0 IP = 192.168.1.101
WLAN0 MAC = b8:27:eb:25:61:0e
WiFi country = US
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.4
KERNEL = 4.14.54-v7+
KTIMER FREQ = 100 Hz
USB BOOT = not enabled
Warranty = OK
ROOT size = 59G
ROOT used = 4%
ROOT avail = 55G
FS expand = expanded
MEM free = 559 MB
MEM used = 60 MB
Temperature = 60.1°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = On
P3-BT = On
HDMI = On
ETH0 CHECK = Off
MAX USB CUR = Off
UAC2 FIX = Off
SSH server = Off
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 0.13 0.00 99.75
0 0.00 0.00 100.00
1 0.00 0.00 100.00
2 0.00 0.00 100.00
3 0.50 0.00 99.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
29 - mpd 2.8 3 2.0
19 - sysinfo.sh 0.2 2 2.0
19 - php-fpm7.0 1.2 0 1.0
19 - sudo 0.3 3 0.5
19 - worker.php 1.1 3 0.2
19 - systemd 0.6 3 0.0
19 - kthreadd 0.0 2 0.0
39 - kworker/0:0H 0.0 0 0.0
39 - mm_percpu_wq 0.0 0 0.0
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 200 MHz
h264 = 300 MHz pixel = 148 MHz
isp = 300 MHz vec = 0 MHz
v3d = 300 MHz hdmi = 163 MHz
uart = 48 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.2688V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
U I C U S T O M I Z A T I O N S
Theme = Standard
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Playback history = No
Extra metadata = Yes
Library = AlbumArtist
A U D I O P A R A M E T E R S
Audio device = HiFiBerry DAC+ Pro
Interface = I2S
Hdwr volume = Controller detected
Mixer name = Digital
Output stream = S24_LE / 44100
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 0
Volume mute = Unmuted
Bluetooth controller = Off
Airplay receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = On
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.20
Volume control = disabled
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = no
DSD over PCM (DoP) = no
Replay gain = off
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.49
Bluealsa ver = Turn BT on for version info
Speaker sharing = No
Resume MPD = No
A I R P L A Y S E T T I N G S
Version = 3.1.7
Friendly name = Moode Airplay
ALSA device = hw:0
Volume mixer = auto
Resume MPD = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Resume MPD = No
Other options = -W -D 500 -R E -S /var/loca
M O O D E L O G
20180925 125126 worker: - Start
20180925 125126 worker: Successfully daemonized
20180925 125126 worker: Session loaded
20180925 125126 worker: Debug logging (off)
20180925 125126 worker: - Platform
20180925 125127 worker: Host (moode)
20180925 125127 worker: Hdwr (Pi-3B 1GB v1.2)
20180925 125127 worker: Arch (armv7l)
20180925 125127 worker: Rasp (9.4)
20180925 125127 worker: Kver (4.14.54-v7+)
20180925 125127 worker: Ktyp (Standard)
20180925 125127 worker: Gov (performance)
20180925 125127 worker: Rel (Moode 4.2 2018-07-11)
20180925 125127 worker: Upd (None)
20180925 125127 worker: MPD (0.20.20)
20180925 125127 worker: USB boot not enabled yet
20180925 125128 worker: File system expanded
20180925 125128 worker: HDMI port on
20180925 125128 worker: File check ok
20180925 125128 worker: - Network
20180925 125128 worker: eth0 exists
20180925 125128 worker: eth0 (192.168.1.19)
20180925 125128 worker: wlan0 exists
20180925 125128 worker: wifi country (US)
20180925 125128 worker: wlan0 trying SSID (*redacted*)
20180925 125128 worker: wlan0 (192.168.1.101)
20180925 125128 worker: - Audio
20180925 125128 worker: ALSA outputs unmuted
20180925 125128 worker: ALSA card number (0)
20180925 125128 worker: Audio out (I2S audio device)
20180925 125128 worker: Audio dev (HiFiBerry DAC+ Pro)
20180925 125128 worker: ALSA mixer name (Digital)
20180925 125128 worker: MPD volume control (disabled)
20180925 125129 worker: Hdwr volume controller exists
20180925 125129 worker: Chip options (Burr Brown PCM5122)
20180925 125129 worker: - Services
20180925 125129 worker: Reset renderer active
20180925 125131 worker: MPD started
20180925 125131 worker: MPD scheduler policy (time-share)
20180925 125131 worker: Configure MPD outputs
20180925 125131 worker: MPD output 1 ALSA default (on)
20180925 125131 worker: MPD output 2 ALSA crossfeed (off)
20180925 125131 worker: MPD output 3 ALSA parametric eq (off)
20180925 125131 worker: MPD output 4 ALSA graphic eq (off)
20180925 125131 worker: MPD output 5 ALSA bluetooth (off)
20180925 125131 worker: MPD crossfade (off)
20180925 125131 worker: - Music sources
20180925 125131 worker: USB sources (none attached)
20180925 125131 worker: NAS sources (mountall initiated)
20180925 125131 worker: - Miscellaneous
20180925 125131 worker: Volume level (0) restored
20180925 125131 worker: Auto-shuffle started
20180925 125131 worker: Maintenance interval (21600)
20180925 125131 worker: Screen saver timeout (Never)
20180925 125131 worker: Watchdog started
20180925 125131 worker: Ready
no errors in cat /var/log/mpd/log. Just a list of "updated" music since I just ran a rescan. It looks like the problem may be that the web server gets corrupted somehow? Some settings can be changed via the UI but some are unresponsive. For example if I try to change my audio device (I did this to rule out wrong device in the dropdown) I can set it, but if I use the reboot selection from the UI the PI will not reboot. I can ssh into it and reboot from CLI but not from the web UI.
