[PROBLEM] Volume goes to Zero on change

[romain]

Hello,

since I've been using moOde 8.0.2, I have the same problem of volume adjustment as in the initial post of this thread with the MAFA android app (MPD client): volume jumps to 0 if I try to change it. This didn't occur with moOde 7.6.1.

I use Allo BOSS2 and MiniBOSS DACs.

 I will do more tests and let you know.

Thanks,
Romain

Problem only occurs with my BOSS2 DAC whereas it works fine with the MINIBOSS. Same install, same moOde version (8.0.2), same mpd settings on both players, the only difference is the I2S device. Changing volume type from hardware to software has no effect.

Very odd.

Try checking the state of the mixer and whether it's on or off
https://moodeaudio.org/forum/showthread....9#pid40829

For the Boss 2 run the command below

Code:

amixer sget "Master"

Result of this command:

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 220 [86%] [-17.50dB] [on]
  Front Right: Playback 220 [86%] [-17.50dB] [on]

Also, if I change the volume with MAFA, volume in moOde web interface is not synchronized and vice versa