09-21-2023, 06:13 AM
(09-20-2023, 08:10 PM)Tim Curtis Wrote: Most likely the Zero's total USB bus power is not sufficient to support the 4th connected device but as @fdealexa mentioned you should first connect just the Toshiba drive and verify that it's recognized and functions correctly.
Once thats done u could try a powered USB hub, they are readily available for example:
https://www.amazon.com/AmazonBasics-Port...r=8-3&th=1
No luck . Drive directly connected to zero via the usb to micro usb adapter . Removed all other devices . It only detects the sdcard .
Just put an order over a powered usb hub .
spiros@moode:~ $ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
spiros@moode:~ $ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 58.3G 0 disk
├─mmcblk0p1 179:1 0 256M 0 part /boot
└─mmcblk0p2 179:2 0 58G 0 part /
Raspberry Pi Zero W & Behringer UCA 202 @ HK 3490 & Dali Zensor 5
