[SOLVED] Allo 2.1 and Kali..wth?

[DRONE7]

Have a piano 2.1 and pi 3 working fine... added Kali and now no output at all...

Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...

Changed  config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....

anyone care to share their working config...?

EDIT brand new install and same problem.....No Output....wtf ... 

Code:

Audio Information
INPUT PROCESSING
Source:     http://5.152.208.98:8058
Encoded at:     VBR compression
Decoded to:     24 bit, 44.1 kHz, Stereo, 128 kbps
DSP OPERATIONS
Resampling:     32 bit, * kHz, Stereo (SoX very high quality)
Crossfeed:     off
Equalizer:     Graphic EQ: (off), Parametric EQ: (off}
Crossfade:     0 seconds
Other:     Volume normalize (no}, Replaygain (off)
Chip options:     FIR interpolation with de-emphasis, gain=0 dB, boost=0 dB
Volume ctl:     Software (MPD 32-bit float with dither)
OUTPUT STREAM
Destination:     Local
Encoded at:     32 bit, 44.1 kHz, Stereo, 2.822 mbps
AUDIO DEVICE
Device:     Allo Piano 2.1 Hi-Fi DAC
Chip:     Burr Brown PCM5142
Interface:     I2S



 S Y S T E M    P A R A M E T E R S  

    Date and time    = 2019-01-17 20:36:49
    System uptime    = up 6 minutes
    Timezone    = Pacific/Auckland
    moOde        = Release 4.4 2018-12-09

    Host name    = moode
    ETH0  IP    = 192.168.1.22
    ETH0  MAC    = b8:27:eb:ee:a9:40
    WLAN0 IP    = unassigned
    WLAN0 MAC    = no adapter
    WiFi country    = US

    HDWR REV    = Pi-3B 1GB v1.2
    SoC         = BCM2835
    CORES        = 4
    ARCH        = armv7l
    RASPBIAN    = 9.6
    KERNEL        = 4.14.84-v7+
    KTIMER FREQ    = 100 Hz
    USB BOOT    = enabled
    Warranty    = OK

    ROOT size    = 7.3G
    ROOT used     = 29%
    ROOT avail    = 5.0G
    FS expand    = expanded
    MEM free     = 708 MB
    MEM used     = 57 MB
    Temperature     = 49.4°C

    CPU GOV        = performance
    MPD SCHDPOL    = TS
    P3-WIFI        = Off
    P3-BT        = Off
    HDMI        = Off
    ETH0 CHECK    = On
    MAX USB CUR    = Off
    UAC2 FIX    = Off
    ETHPORT FIX    = Off
    SSH server    = Off

    LED0        = on
    LED1        = on

      C O R E    S E R V E R S  

    PHP-FPM        = 7.0.30
    NGINX        = 1.10.3
    SQLite        = 3.16.2

      C P U    L O A D  

    CPU    %usr    %sys    %idle
    all    0.63    0.38    99.00
    0    2.01    0.00    97.99
    1    0.51    0.00    99.49
    2    0.00    1.49    98.51
    3    0.00    0.00    100.00

      P R O C E S S    L O A D  

    PRI RTPRIO COMMAND         %MEM PSR %CPU
     29      - mpd              2.6   2  2.2
     19      - sysinfo.sh       0.2   0  1.6
     19      - systemd          0.6   0  0.5
     19      - kworker/0:1      0.0   0  0.3
     19      - php-fpm7.0       1.4   1  0.3
     19      - sudo             0.3   3  0.3
     19      - worker.php       1.2   0  0.2
     19      - systemd-journal  0.4   1  0.1
     19      - systemd-udevd    0.3   1  0.1

      C L O C K    F R E Q U E N C I E S  

        arm   = 1200 MHz           pwm   = 0 MHz
        core  = 400 MHz               emmc  = 200 MHz
        h264  = 300 MHz               pixel = 0 MHz
        isp   = 300 MHz               vec   = 0 MHz
        v3d   = 300 MHz               hdmi  = 0 MHz
        uart  = 47 MHz               dpi   = 0 MHz

    SD card    = 50 MHz

      S Y S T E M    V O L T A G E S  

    core            = 1.3000V
    sdram controller    = 1.2000V
    sdram I/O        = 1.2000V  S Y S T E M    P A R A M E T E R S  

    Date and time    = 2019-01-17 20:36:49
    System uptime    = up 6 minutes
    Timezone    = Pacific/Auckland
    moOde        = Release 4.4 2018-12-09

    Host name    = moode
    ETH0  IP    = 192.168.1.22
    ETH0  MAC    = b8:27:eb:ee:a9:40
    WLAN0 IP    = unassigned
    WLAN0 MAC    = no adapter
    WiFi country    = US

    HDWR REV    = Pi-3B 1GB v1.2
    SoC         = BCM2835
    CORES        = 4
    ARCH        = armv7l
    RASPBIAN    = 9.6
    KERNEL        = 4.14.84-v7+
    KTIMER FREQ    = 100 Hz
    USB BOOT    = enabled
    Warranty    = OK

    ROOT size    = 7.3G
    ROOT used     = 29%
    ROOT avail    = 5.0G
    FS expand    = expanded
    MEM free     = 708 MB
    MEM used     = 57 MB
    Temperature     = 49.4°C

    CPU GOV        = performance
    MPD SCHDPOL    = TS
    P3-WIFI        = Off
    P3-BT        = Off
    HDMI        = Off
    ETH0 CHECK    = On
    MAX USB CUR    = Off
    UAC2 FIX    = Off
    ETHPORT FIX    = Off
    SSH server    = Off

    LED0        = on

Code:

pi@moode:~ $ ./piano.sh
Dual mode: Dual-Mono
Subw mode: None
Sub xover: 60
Sub level: 81%
Main levl: 100%
Mstr levl: 100%
pi@moode:~ $

Well,    no output..no support...no debugging .. no work...