Login

drfous · 07-25-2022, 05:24 PM

(07-24-2022, 11:05 PM)Tim Curtis Wrote:
(07-24-2022, 08:24 PM)drfous Wrote: I set the network ssid to "None" and that cut the network section load from 3 minutes to 1.5.

It's still checking the wifi 40 something times. In any case, we're booting faster today than we were yesterday.

Thx

After looking at the code and running a few tests there is in fact a section of code in the startup daemon that needs a bit of additional logic to prevent the IP address check for wlan0 happening twice even if SSID is set to "None".

I'll fix for upcoming moOde 8.2.0 release :-)

Cool. It wasn't just me for once. Smile

MikeyFresh · 07-25-2022, 08:33 PM

(07-24-2022, 11:05 PM)Tim Curtis Wrote:
(07-24-2022, 08:24 PM)drfous Wrote: I set the network ssid to "None" and that cut the network section load from 3 minutes to 1.5.

It's still checking the wifi 40 something times. In any case, we're booting faster today than we were yesterday.

Thx

After looking at the code and running a few tests there is in fact a section of code in the startup daemon that needs a bit of additional logic to prevent the IP address check for wlan0 happening twice even if SSID is set to "None".

I'll fix for upcoming moOde 8.2.0 release :-)

I'm curious why I've never had that behavior.

In my case I have never setup WiFi at all, and I did switch the integrated WiFi adapter System Modifications setting to OFF. Is that why my system hasn't exhibited this same long boot time?

**Tim Curtis** · 07-25-2022, 10:56 PM

If no WiFi adapter is present or is turned off in System Config the issue won't occur. When the adapter is present moOde startup will check for an assigned IP address for up to 90 secs (configurable in System Config) but will do this twice if the check results in no IP address assigned.

chaos333 · 09-12-2022, 01:51 PM

hello Tim,
my moode audio 8.1.2 works great on my Pi3b 1gb with a Pi2AES hat using its coxial outout to rme-adi-2 dac fs.
thank you for the great software and most of all, free.

as a try, i installed roon render in the pi3 and use roon control core and choose above said hat but output is nothing. i can read from roon control app that the roon endpoint is working and also the moode-ip,,which used to show the playback scress shows roon end ponited connted and there is another button "disconnect", i can assump that the roon endpoint is working on the PI3+ but i did not know if this is beause the Pi HAT does not support?

but when i use USB connect to the dac---and choose options from Pi2AES to none which makes the PI as only a streamer while somehow--by pass the PI2AEShat, it works and can receive and output music from ROON.

please if you know what is the seeting or reason? please let me know.

i may also ask the PI2AES designer while either of you if can solve this and i will be great appreaicted.
thanks.

**Tim Curtis** · 09-12-2022, 02:35 PM

I would ask on the Roon forums since you are using their software stack. moOde simply launches roonbridge and then steps out of the way.

Mattt · (This post was last modified: 09-17-2022, 11:31 PM by Mattt.)

Have updated. After restarting I got the message "packet unavailable update unsuccessful" or similar wording, but the update seems to have occurred.
I'm a bit disappointed that the One Touch Playlist menu doesn't include a show tracks option. Can this be added at some point please?

**Tim Curtis** · 09-18-2022, 12:23 AM

Post the update log and startup log and I'll have a look. There should be no errors otherwise the update can't be relied on.

Code:
cat /var/local/www/update-r812.log

moodeutl -l

What's the usage scenario for just one-click displaying the items in a playlist as opposed to displaying the items for the purpose of editing them?

Mattt · (This post was last modified: 09-18-2022, 02:28 AM by Mattt.)

(09-18-2022, 12:23 AM)Tim Curtis Wrote: Post the update log and startup log and I'll have a look. There should be no errors otherwise the update can't be relied on.

Code:
cat /var/local/www/update-r812.log moodeutl -l

20220918 074056 updater: Start 2022-09-16 update for moOde 8.1.2 2022-07-08
20220918 074056 updater: ** Release check
20220918 074056 updater: ** Step 1-10: Update package list
20220918 074110 updater: ** Step 2-10: Remove package hold
20220918 074111 updater: ** Step 3-10: Install timesyncd
20220918 074118 updater: ** Step 4-10: Install alsa-cdsp=1.2.0-1moode1
20220918 074130 updater: ** Step 5-10: Install camillagui=1.0.0-1moode3
20220918 074143 updater: ** Step 6-10: Install librespot=0.4.2-1moode1
20220918 074155 updater: ** Step 7-10: Install moode-player=8.2.0-1moode1
20220918 074246 updater: ** Step 8-10: Apply package hold
20220918 074247 updater: ** Step 9-10: Post-install cleanup
20220918 074247 updater: ** Step 10-10: Sync changes to disk
20220918 074247 updater: Finish 2022-09-16 update for moOde 8.1.2 2022-07-08

pi@moode:~ $ moodeutl -l
20220918 074318 worker: --
20220918 074318 worker: -- Start moOde 8 series
20220918 074318 worker: --
20220918 074318 worker: Successfully daemonized
20220918 074343 worker: File check (OK)
20220918 074344 worker: Session vacuumed
20220918 074344 worker: Session loaded
20220918 074344 worker: Debug logging (OFF)
20220918 074344 worker: --
20220918 074344 worker: -- Audio debug
20220918 074344 worker: --
20220918 074344 worker: ALSA cards: (0:BossDAC | 1:empty | 2:empty | 3:empty
20220918 074344 worker: MPD config: (0:Allo Boss DAC | mixerDigital) | card:0)
20220918 074344 worker: ALSA mixer actual (Digital)
20220918 074344 worker: ALSA Digital volume set to (0%)
20220918 074344 worker: --
20220918 074344 worker: -- System
20220918 074344 worker: --
20220918 074349 worker: Host (moode)
20220918 074349 worker: moOde (8.2.0 2022-09-16)
20220918 074349 worker: RaspiOS (11.3)
20220918 074349 worker: Kernel (5.15.32-v8+ #1538)
20220918 074349 worker: Platform (Pi-3B+ 1.3 1GB)
20220918 074349 worker: ARM arch (aarch64, 64-bit)
20220918 074349 worker: MPD ver (0.23.5)
20220918 074349 worker: CPU gov (ondemand)
20220918 074349 worker: USB boot (enabled)
20220918 074349 worker: File sys (expanded)
20220918 074349 worker: HDMI port (Off)
20220918 074349 worker: Sys LED0 (On)
20220918 074349 worker: Sys LED1 (On)
20220918 074349 worker: --
20220918 074349 worker: -- Network
20220918 074349 worker: --
20220918 074350 worker: eth0 adapter exists
20220918 074350 worker: eth0 check for address (No)
20220918 074350 worker: IP addr (192.168.20.27)
20220918 074350 worker: Netmask (255.255.255.0)
20220918 074350 worker: Gateway (192.168.20.1)
20220918 074350 worker: Pri DNS (192.168.20.1)
20220918 074350 worker: Domain (Home)
20220918 074350 worker: wlan0 adapter does not exist
20220918 074350 worker: apd0 router mode ()
20220918 074350 worker: --
20220918 074350 worker: -- Software update
20220918 074350 worker: --
20220918 074350 worker: Automatic check (Off)
20220918 074350 worker: --
20220918 074350 worker: -- Audio config
20220918 074350 worker: --
20220918 074350 worker: MPD conf updated
20220918 074350 worker: ALSA card number (0)
20220918 074350 worker: MPD audio output (Allo Boss DAC)
20220918 074350 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20220918 074350 worker: ALSA mixer name (Digital)
20220918 074350 worker: MPD mixer type (fixed 0dB)
20220918 074350 worker: Hdwr volume controller exists
20220918 074350 worker: Max ALSA volume (100%)
20220918 074350 worker: ALSA output mode (Direct: hw)
20220918 074351 worker: ALSA loopback (Off)
20220918 074351 worker: Reset renderer active flags
20220918 074351 worker: CamillaDSP (off)
20220918 074351 worker: --
20220918 074351 worker: -- File sharing
20220918 074351 worker: --
20220918 074351 worker: SMB file sharing (Off)
20220918 074351 worker: NFS file sharing (Off)
20220918 074351 worker: --
20220918 074351 worker: -- MPD startup
20220918 074351 worker: --
20220918 074351 worker: MPD started
20220918 074351 worker: MPD accepting connections
20220918 074352 worker: MPD output 1 ALSA Default (On)
20220918 074352 worker: MPD output 2 ALSA Bluetooth (Off)
20220918 074352 worker: MPD output 3 HTTP Server (Off)
20220918 074352 worker: MPD crossfade (off)
20220918 074352 worker: MPD ignore CUE files (yes)
20220918 074352 worker: --
20220918 074352 worker: -- Music sources
20220918 074352 worker: --
20220918 074352 worker: USB sources (none attached)
20220918 074354 worker: NAS sources (mountall initiated)
20220918 074354 worker: --
20220918 074354 worker: -- Feature availability
20220918 074354 worker: --
20220918 074354 worker: Source select (available)
20220918 074354 worker: Source select (source: MPD)
20220918 074354 worker: Source select (output: Allo Boss DAC)
20220918 074354 worker: Bluetooth (available)
20220918 074354 worker: Airplay renderer (available)
20220918 074354 worker: Spotify renderer (available)
20220918 074354 worker: Squeezelite (available)
20220918 074354 worker: RoonBridge renderer (not installed)
20220918 074354 worker: Multiroom sender (available)
20220918 074354 worker: Multiroom receiver (available)
20220918 074354 worker: UPnP renderer (available)
20220918 074354 worker: DLNA server (available)
20220918 074354 worker: GPIO button handler (available)
20220918 074354 worker: Stream recorder (n/a)
20220918 074354 worker: --
20220918 074354 worker: -- Other
20220918 074354 worker: --
20220918 074354 worker: USB volume knob (Off)
20220918 074354 worker: USB auto-mounter (udisks-glue)
20220918 074354 worker: Saved MPD vol level (0)
20220918 074354 worker: Preamp volume level (0)
20220918 074354 worker: MPD volume level (0) restored
20220918 074354 worker: ALSA Digital volume (100%)
20220918 074354 worker: Auto-play (Off)
20220918 074354 worker: LocalUI started
20220918 074354 worker: CoverView toggle (-on)
20220918 074354 worker: Maintenance interval (360 minutes)
20220918 074354 worker: Screen saver activation (60)
20220918 074354 worker: Session permissions (OK)
20220918 074354 worker: Watchdog started
20220918 074354 worker: Ready
20220918 074431 worker: Job install_update
20220918 074431 updater: Downloading package [update-moode.zip]
20220918 074431 updater: Package not found, update cancelled
20220918 135312 worker: Job shellinabox

What's the usage scenario for just one-click displaying the items in a playlist as opposed to displaying the items for the purpose of editing them?

I have alot of playlists and can't always remember what they contain. a quick look at the first few tracks or a scroll through is usually enough to jog my memory so a one click option to view the tracks and then one click again to close would be very useful for me.

ElmhurstFun · 09-18-2022, 04:50 AM

(09-18-2022, 02:14 AM)Mattt Wrote:
(09-18-2022, 12:23 AM)Tim Curtis Wrote: Post the update log and startup log and I'll have a look. There should be no errors otherwise the update can't be relied on.

Code:
cat /var/local/www/update-r812.log moodeutl -l

20220918 074056 updater: Start 2022-09-16 update for moOde 8.1.2 2022-07-08
20220918 074056 updater: ** Release check
20220918 074056 updater: ** Step 1-10: Update package list
20220918 074110 updater: ** Step 2-10: Remove package hold
20220918 074111 updater: ** Step 3-10: Install timesyncd
20220918 074118 updater: ** Step 4-10: Install alsa-cdsp=1.2.0-1moode1
20220918 074130 updater: ** Step 5-10: Install camillagui=1.0.0-1moode3
20220918 074143 updater: ** Step 6-10: Install librespot=0.4.2-1moode1
20220918 074155 updater: ** Step 7-10: Install moode-player=8.2.0-1moode1
20220918 074246 updater: ** Step 8-10: Apply package hold
20220918 074247 updater: ** Step 9-10: Post-install cleanup
20220918 074247 updater: ** Step 10-10: Sync changes to disk
20220918 074247 updater: Finish 2022-09-16 update for moOde 8.1.2 2022-07-08

pi@moode:~ $ moodeutl -l
20220918 074318 worker: --
20220918 074318 worker: -- Start moOde 8 series
20220918 074318 worker: --
20220918 074318 worker: Successfully daemonized
20220918 074343 worker: File check (OK)
20220918 074344 worker: Session vacuumed
20220918 074344 worker: Session loaded
20220918 074344 worker: Debug logging (OFF)
20220918 074344 worker: --
20220918 074344 worker: -- Audio debug
20220918 074344 worker: --
20220918 074344 worker: ALSA cards: (0:BossDAC | 1:empty | 2:empty | 3:empty
20220918 074344 worker: MPD config: (0:Allo Boss DAC | mixerDigital) | card:0)
20220918 074344 worker: ALSA mixer actual (Digital)
20220918 074344 worker: ALSA Digital volume set to (0%)
20220918 074344 worker: --
20220918 074344 worker: -- System
20220918 074344 worker: --
20220918 074349 worker: Host (moode)
20220918 074349 worker: moOde (8.2.0 2022-09-16)
20220918 074349 worker: RaspiOS (11.3)
20220918 074349 worker: Kernel (5.15.32-v8+ #1538)
20220918 074349 worker: Platform (Pi-3B+ 1.3 1GB)
20220918 074349 worker: ARM arch (aarch64, 64-bit)
20220918 074349 worker: MPD ver (0.23.5)
20220918 074349 worker: CPU gov (ondemand)
20220918 074349 worker: USB boot (enabled)
20220918 074349 worker: File sys (expanded)
20220918 074349 worker: HDMI port (Off)
20220918 074349 worker: Sys LED0 (On)
20220918 074349 worker: Sys LED1 (On)
20220918 074349 worker: --
20220918 074349 worker: -- Network
20220918 074349 worker: --
20220918 074350 worker: eth0 adapter exists
20220918 074350 worker: eth0 check for address (No)
20220918 074350 worker: IP addr (192.168.20.27)
20220918 074350 worker: Netmask (255.255.255.0)
20220918 074350 worker: Gateway (192.168.20.1)
20220918 074350 worker: Pri DNS (192.168.20.1)
20220918 074350 worker: Domain (Home)
20220918 074350 worker: wlan0 adapter does not exist
20220918 074350 worker: apd0 router mode ()
20220918 074350 worker: --
20220918 074350 worker: -- Software update
20220918 074350 worker: --
20220918 074350 worker: Automatic check (Off)
20220918 074350 worker: --
20220918 074350 worker: -- Audio config
20220918 074350 worker: --
20220918 074350 worker: MPD conf updated
20220918 074350 worker: ALSA card number (0)
20220918 074350 worker: MPD audio output (Allo Boss DAC)
20220918 074350 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20220918 074350 worker: ALSA mixer name (Digital)
20220918 074350 worker: MPD mixer type (fixed 0dB)
20220918 074350 worker: Hdwr volume controller exists
20220918 074350 worker: Max ALSA volume (100%)
20220918 074350 worker: ALSA output mode (Direct: hw)
20220918 074351 worker: ALSA loopback (Off)
20220918 074351 worker: Reset renderer active flags
20220918 074351 worker: CamillaDSP (off)
20220918 074351 worker: --
20220918 074351 worker: -- File sharing
20220918 074351 worker: --
20220918 074351 worker: SMB file sharing (Off)
20220918 074351 worker: NFS file sharing (Off)
20220918 074351 worker: --
20220918 074351 worker: -- MPD startup
20220918 074351 worker: --
20220918 074351 worker: MPD started
20220918 074351 worker: MPD accepting connections
20220918 074352 worker: MPD output 1 ALSA Default (On)
20220918 074352 worker: MPD output 2 ALSA Bluetooth (Off)
20220918 074352 worker: MPD output 3 HTTP Server (Off)
20220918 074352 worker: MPD crossfade (off)
20220918 074352 worker: MPD ignore CUE files (yes)
20220918 074352 worker: --
20220918 074352 worker: -- Music sources
20220918 074352 worker: --
20220918 074352 worker: USB sources (none attached)
20220918 074354 worker: NAS sources (mountall initiated)
20220918 074354 worker: --
20220918 074354 worker: -- Feature availability
20220918 074354 worker: --
20220918 074354 worker: Source select (available)
20220918 074354 worker: Source select (source: MPD)
20220918 074354 worker: Source select (output: Allo Boss DAC)
20220918 074354 worker: Bluetooth (available)
20220918 074354 worker: Airplay renderer (available)
20220918 074354 worker: Spotify renderer (available)
20220918 074354 worker: Squeezelite (available)
20220918 074354 worker: RoonBridge renderer (not installed)
20220918 074354 worker: Multiroom sender (available)
20220918 074354 worker: Multiroom receiver (available)
20220918 074354 worker: UPnP renderer (available)
20220918 074354 worker: DLNA server (available)
20220918 074354 worker: GPIO button handler (available)
20220918 074354 worker: Stream recorder (n/a)
20220918 074354 worker: --
20220918 074354 worker: -- Other
20220918 074354 worker: --
20220918 074354 worker: USB volume knob (Off)
20220918 074354 worker: USB auto-mounter (udisks-glue)
20220918 074354 worker: Saved MPD vol level (0)
20220918 074354 worker: Preamp volume level (0)
20220918 074354 worker: MPD volume level (0) restored
20220918 074354 worker: ALSA Digital volume (100%)
20220918 074354 worker: Auto-play (Off)
20220918 074354 worker: LocalUI started
20220918 074354 worker: CoverView toggle (-on)
20220918 074354 worker: Maintenance interval (360 minutes)
20220918 074354 worker: Screen saver activation (60)
20220918 074354 worker: Session permissions (OK)
20220918 074354 worker: Watchdog started
20220918 074354 worker: Ready
20220918 074431 worker: Job install_update
20220918 074431 updater: Downloading package [update-moode.zip]
20220918 074431 updater: Package not found, update cancelled
20220918 135312 worker: Job shellinabox

What's the usage scenario for just one-click displaying the items in a playlist as opposed to displaying the items for the purpose of editing them?

I have alot of playlists and can't always remember what they contain. a quick look at the first few tracks or a scroll through is usually enough to jog my memory so a one click option to view the tracks and then one click again to close would be very useful for me.

Same result for me with similar startup log info referring to package not found.

**Tim Curtis** · 09-18-2022, 12:57 PM

I ran a quick test of the 8.1.2 -> 8.2.0 update on a fresh 8.1.2 system and I'm not seeing those messages (below) in the moOde startup log after updating, rebooting, and checking for update again.

Code:
20220918 074354 worker: Ready

20220918 074431 worker: Job install_update

20220918 074431 updater: Downloading package [update-moode.zip]

20220918 074431 updater: Package not found, update cancelled                                             

Here are the logs from the test.

1. Update log

Code:
pi@moode:~ $ cat /var/local/www/update-r812.log 

20220918 082520 updater: Start 2022-09-16 update for moOde 8.1.2 2022-07-08

20220918 082520 updater: ** Release check

20220918 082520 updater: ** Step 1-10: Update package list

20220918 082556 updater: ** Step 2-10: Remove package hold

20220918 082600 updater: ** Step 3-10: Install timesyncd

20220918 082700 updater: ** Step 4-10: Install alsa-cdsp=1.2.0-1moode1

20220918 082717 updater: ** Step 5-10: Install camillagui=1.0.0-1moode3

20220918 082731 updater: ** Step 6-10: Install librespot=0.4.2-1moode1

20220918 082751 updater: ** Step 7-10: Install moode-player=8.2.0-1moode1

20220918 082843 updater: ** Step 8-10: Apply package hold

20220918 082843 updater: ** Step 9-10: Post-install cleanup

20220918 082843 updater: ** Step 10-10: Sync changes to disk

20220918 082844 updater: Finish 2022-09-16 update for moOde 8.1.2 2022-07-08

2. Reboot from the UI per the completion message

3. moOde startup log

Code:
pi@moode:~ $ moodeutl -l

20220918 083228 worker: --

20220918 083228 worker: -- Start moOde 8 series

20220918 083228 worker: --

20220918 083228 worker: Successfully daemonized

20220918 083315 worker: File check (OK)

20220918 083316 worker: Session vacuumed

20220918 083316 worker: Session loaded

20220918 083316 worker: Debug logging (OFF)

20220918 083316 worker: --

20220918 083316 worker: -- Audio debug

20220918 083316 worker: --

20220918 083316 worker: ALSA cards: (0:b1 | 1:Headphones | 2:empty | 3:empty

20220918 083316 worker: MPD config: (0:Pi HDMI 1 | mixer:(HDMI) | card:0)

20220918 083316 worker: ALSA mixer actual (HDMI)

20220918 083316 worker: ALSA HDMI volume set to (0%)

20220918 083316 worker: --

20220918 083316 worker: -- System

20220918 083316 worker: --

20220918 083318 worker: Host      (moode)

20220918 083318 worker: moOde     (8.2.0 2022-09-16)

20220918 083318 worker: RaspiOS   (11.3)

20220918 083318 worker: Kernel    (5.15.32-v8+ #1538)

20220918 083318 worker: Platform  (Pi-3B+ 1.3 1GB)

20220918 083318 worker: ARM arch  (aarch64, 64-bit)

20220918 083318 worker: MPD ver   (0.23.5)

20220918 083318 worker: CPU gov   (ondemand)

20220918 083318 worker: USB boot  (enabled)

20220918 083319 worker: File sys  (expanded)

20220918 083319 worker: HDMI port (On)

20220918 083319 worker: Sys LED0  (On)

20220918 083319 worker: Sys LED1  (On)

20220918 083319 worker: --

20220918 083319 worker: -- Network

20220918 083319 worker: --

20220918 083319 worker: eth0 adapter exists

20220918 083319 worker: eth0 check for address (No)

20220918 083319 worker: eth0 address not assigned

20220918 083319 worker: wlan0 adapter exists

20220918 083319 worker: wlan0 country (US)

20220918 083319 worker: wlan0 trying configured SSID (AirnetN5)

20220918 083319 worker: wlan0 connected SSID is (AirnetN5)

20220918 083319 worker: IP addr (192.168.1.121)

20220918 083319 worker: Netmask (255.255.255.0)

20220918 083319 worker: Gateway (192.168.1.1)

20220918 083319 worker: Pri DNS (192.168.1.1)

20220918 083319 worker: Domain  (home)

20220918 083319 worker: wlan0 power save disabled

20220918 083319 worker: apd0 router mode (Off)

20220918 083319 worker: --

20220918 083319 worker: -- Software update

20220918 083319 worker: --

20220918 083319 worker: Automatic check (Off)

20220918 083319 worker: --

20220918 083319 worker: -- Audio config

20220918 083319 worker: --

20220918 083320 worker: MPD conf updated

20220918 083320 worker: ALSA card number (0)

20220918 083320 worker: MPD audio output (Pi HDMI 1)

20220918 083321 worker: Audio formats (U8, S16_LE)

20220918 083321 worker: ALSA mixer name (HDMI)

20220918 083321 worker: MPD mixer type (hardware)

20220918 083321 worker: Hdwr volume controller exists

20220918 083321 worker: Max ALSA volume (100%)

20220918 083321 worker: ALSA output mode (Default: plughw)

20220918 083321 worker: ALSA loopback (Off)

20220918 083321 worker: Reset renderer active flags

20220918 083321 worker: CamillaDSP (off)

20220918 083321 worker: --

20220918 083321 worker: -- File sharing

20220918 083321 worker: --

20220918 083321 worker: SMB file sharing (Off)

20220918 083321 worker: NFS file sharing (Off)

20220918 083321 worker: --

20220918 083321 worker: -- MPD startup

20220918 083321 worker: --

20220918 083321 worker: MPD started

20220918 083321 worker: MPD accepting connections

20220918 083321 worker: MPD output 1 ALSA Default (On)

20220918 083321 worker: MPD output 2 ALSA Bluetooth (Off)

20220918 083321 worker: MPD output 3 HTTP Server (Off)

20220918 083321 worker: MPD crossfade (off)

20220918 083321 worker: MPD ignore CUE files (yes)

20220918 083321 worker: --

20220918 083321 worker: -- Music sources

20220918 083321 worker: --

20220918 083321 worker: USB sources (none attached)

20220918 083321 worker: NAS sources (none configured)

20220918 083321 worker: --

20220918 083321 worker: -- Feature availability

20220918 083321 worker: --

20220918 083321 worker: Source select (available)

20220918 083321 worker: Source select (source: MPD)

20220918 083322 worker: Source select (output: Pi HDMI 1)

20220918 083322 worker: Bluetooth (available)

20220918 083322 worker: Airplay renderer (available)

20220918 083322 worker: Spotify renderer (available)

20220918 083322 worker: Squeezelite (available)

20220918 083322 worker: RoonBridge renderer (not installed)

20220918 083322 worker: Multiroom sender (available)

20220918 083322 worker: Multiroom receiver (available)

20220918 083322 worker: UPnP renderer (available)

20220918 083322 worker: DLNA server (available)

20220918 083322 worker: GPIO button handler (available)

20220918 083322 worker: Stream recorder (n/a)

20220918 083322 worker: --

20220918 083322 worker: -- Other

20220918 083322 worker: --

20220918 083322 worker: USB volume knob (Off)

20220918 083322 worker: USB auto-mounter (udisks-glue)

20220918 083322 worker: Saved MPD vol level (0)

20220918 083322 worker: Preamp volume level (0)

20220918 083322 worker: MPD volume level (0) restored

20220918 083322 worker: ALSA HDMI volume (0%)

20220918 083322 worker: Auto-play (Off)

20220918 083322 worker: CoverView toggle (-off)

20220918 083322 worker: Maintenance interval (360 minutes)

20220918 083322 worker: Screen saver activation (Never)

20220918 083322 worker: Session permissions (OK)

20220918 083322 worker: Watchdog started

20220918 083322 worker: Ready

4. Check for software update (System Config)
The message "Software is up to date" appears in the UI and there are no messages in the moOde startup log.

One thing I did notice in @Mattt's log was an empty value for the new APD Router mode option. This option should have a value of "Off".

Code:
20220918 074350 worker: apd0 router mode ()        

The command below will show if there are any problems with this new option. It should return the value "Off".

Code:
pi@moode:~ $ moodeutl -q "select wlan_router from cfg_network where id='3'" 

Off

Login
Username:
Password:	Lost Password?
	Remember me