[SOLVED] Which file system for usb drive?
Thank you for your donation!
|
Solved: Which file system for usb drive?
|
01-11-2019, 06:37 PM
(This post was last modified: 01-12-2019, 08:29 AM by Giuanniello.)
I tried to mount a pen drive on the Pi (ver. 3B+ running Moode 4.4), I have a 32GB one formatted in MacOS file system and a smaller one, 2GB, in FAT32, none got read, I reformatted the smaller one into EXT4 but still doesn't appear through Moode sources, what might the issue be?
Grazie 
01-11-2019, 07:06 PM
Run UPDATE MPD database from the Sources screen after plugging in the drive.
moOde supports the following file system formats. vfat (fat32), ntfs, exfat, hfsplus, ext2, ext3 ext4 If after updating mpd database no song files appear, examine the MPD log for errors cat /var/log/mpd/log
01-11-2019, 07:14 PM
(01-11-2019, 07:06 PM)Tim Curtis Wrote: Run UPDATE MPD database from the Sources screen after plugging in the drive. It worked like a charm thank you so much!!!
01-12-2019, 12:36 AM
When u get a moment, mark you original post as [SOLVED] :-)
05-28-2019, 02:35 PM
(01-12-2019, 12:36 AM)Tim Curtis Wrote: When u get a moment, mark you original post as [SOLVED] :-) Hello, first of all, I would like to thank the work done with Moode Audio; I think it's a very interesting product, especially for audiophiles I have installed on a Raspberry Pi B+ the last version, this is Moode v5.2; all is working well except the USB 2TB NTFS hard disk where I saved my music. It seems the system does not recognize the USB hard drive Probably I am making an error, but I do not know how to address it; can you help me? Thanks in advance
05-28-2019, 03:00 PM
@jmgtierrez
What evidence do you have that your drive isn't recognized? Did you remember to run an MPD Update (from the Library panel) after adding the drive? It won't show up in the other panels until you do. Regards, Kent
05-28-2019, 04:06 PM
(05-28-2019, 03:00 PM)TheOldPresbyope Wrote: @jmgtierrez Hi Kent, thank you for replaying Yes I did, I went to Configure -> Library -> MPD Database -> MPD Update After this the USB folder appeared. But if I enter into the USB folder, there is nothing So what can I do? Thanks again
05-28-2019, 04:38 PM
@jmgtierrez
Hmm. So here are some typical checks you can do from the command line (either via the built-in SSH Web Terminal or via ssh from another computer) The following examples are for a 1Tb Western Digital "My Passport" USB drive attached to an RPi3B+ running moOde r5.2. 1. does the drive show up in the output of lsusb? In my case Code: pi@moodeT52:~ $ lsusb2. did the drive get mounted in /media? In my case Code: pi@moodeT52:~ $ mount3. did MPD report any errors in updating the database? In my case (just the tail of the log) Code: pi@moodeT52:~ $ tail /var/log/mpd/logWhat output do you see? Regards, Kent
05-28-2019, 05:12 PM
@jmgtierrez
If you don't see anything in step 2, then check /var/log/syslog Buried in this log you should see a collection of lines which look something like Code: May 28 12:27:08 moodeT52 kernel: [ 2657.010787] usb 1-1.3: new high-speed USB device number 5 using dwc_otgAnd another thought. Is your system adequately powered? Regards, Kent
05-28-2019, 06:55 PM
(This post was last modified: 05-28-2019, 07:14 PM by jmgtierrez.)
(05-28-2019, 05:12 PM)TheOldPresbyope Wrote: @jmgtierrezHi Kent, this what I found pi@Moode3C:~ $ sudo lsusb Bus 001 Device 005: ID 0bc2:61b5 Seagate RSS LLC Bus 001 Device 004: ID 0424:7800 Standard Microsystems Corp. Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It seems the USB hard drive in connected to the USB hub My partition is /dev/sda2: LABEL="Maxtor1" pi@Moode3C:~ $ sudo blkid /dev/mmcblk0p1: LABEL="boot" UUID="9304-D9FD" TYPE="vfat" PARTUUID="7ee80803-01" /dev/mmcblk0p2: LABEL="rootfs" UUID="29075e46-f0d4-44e2-a9e7-55ac02d6e6cc" TYPE="ext4" PARTUUID="7ee80803-02" /dev/sda2: LABEL="Maxtor1" UUID="808AD3028AD2F41E" TYPE="ntfs" PARTUUID="34cdf4c2-2be1-41e6-a6ff-12a45653fc2f" /dev/mmcblk0: PTUUID="7ee80803" PTTYPE="dos" /dev/sda1: PARTLABEL="EFI System Partition" PARTUUID="d5530532-0af7-4c83-9640-fd880320bc17" pi@Moode3C:~ $ mount /dev/mmcblk0p2 on / type ext4 (rw,noatime) devtmpfs on /dev type devtmpfs (rw,relatime,size=469544k,nr_inodes=117386,mode=755) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd cgroups-agent,name=systemd) cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) debugfs on /sys/kernel/debug type debugfs (rw,relatime) mqueue on /dev/mqueue type mqueue (rw,relatime) sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime) configfs on /sys/kernel/config type configfs (rw,relatime) /dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,error s=remount-ro) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=94828k,mode=700,uid=1000,gid=1000) I do not see /dev/sda2 in mount output pi@Moode3C:~ $ tail /var/log/mpd/log May 28 17:12 : player: played "SDCARD/Stereo Test/LRMonoPhase4.flac" May 28 17:13 : player: played "SDCARD/Stereo Test/LRMonoPhase4.flac" Just only two lines Regarding with /var/log/syslog, I executed tail -100 /var/log/syslog and I don't find any reference to ntfs-3g in the output Related to the hard drive is properly powered, it is powered directely by the raspberry pi Thanks Regards |
|
« Next Oldest | Next Newest »
|
