New Argon M2 enclosure

[DRONE7]

New Argon M2 with M.2 SATA SSD Compatibility , IR, and full size HDMI
https://www.argon40.com/argon-one-m-2-ca...-pi-4.html

Expansion for existing cases..
https://www.argon40.com/argon-one-m-2-ex...board.html

Fan only with power management.
https://www.argon40.com/argon-fan-hat-fo...i-3-b.html

[Jandu]

New Argon M2 with M.2 SATA SSD Compatibility , IR, and full size HDMI
https://www.argon40.com/argon-one-m-2-ca...-pi-4.html

Expansion for existing cases..
https://www.argon40.com/argon-one-m-2-ex...board.html

Fan only with power management.
https://www.argon40.com/argon-fan-hat-fo...i-3-b.html

Would you know if only MoOde is installed. Would the fan be in auto mode or would it be on all the time. With only MoOde, I do not know how to execute the one-line code to get it into auto mode. 

Thanks.

[grumbleweed]

Shame the SD slot gets hidden with the M2 base, makes hotswapping that bit harder.

I don't think the fan has ever turned on with the Argon orginal I have running moOde.

[DRONE7]

New Argon M2 with M.2 SATA SSD Compatibility , IR, and full size HDMI
https://www.argon40.com/argon-one-m-2-ca...-pi-4.html

Expansion for existing cases..
https://www.argon40.com/argon-one-m-2-ex...board.html

Fan only with power management.
https://www.argon40.com/argon-fan-hat-fo...i-3-b.html

Would you know if only MoOde is installed. Would the fan be in auto mode or would it be on all the time. With only MoOde, I do not know how to execute the one-line code to get it into auto mode. 

Thanks.

For MoOde.. to activate the fan operations... (I'm assuming you know your way around ssh, nano, and the Linux terminal. ?)

Code:

git clone https://github.com/Howchoo/pi-fan-controller.git
sudo apt install python3-pip
sudo pip3 install -r pi-fan-controller/requirements.txt
./pi-fan-controller/script/install

Then to edit the fan settings..

Code:

cd /usr/local/bin/
sudo nano fancontrol.py

and edit for your requirements.
To restart the fan..

Code:

sudo /etc/init.d/fancontrol.sh start

At any time to measure temperatures..

Code:

vcgencmd measure_temp

My experience is the same as @grumbleweed.   The fan has never switched on while running MoOde. The passive case cooling is more than enough.

[DRONE7]

Shame the SD slot gets hidden with the M2 base, makes hotswapping that bit harder.

Dremel

[Jandu]

New Argon M2 with M.2 SATA SSD Compatibility , IR, and full size HDMI
https://www.argon40.com/argon-one-m-2-ca...-pi-4.html

Expansion for existing cases..
https://www.argon40.com/argon-one-m-2-ex...board.html

Fan only with power management.
https://www.argon40.com/argon-fan-hat-fo...i-3-b.html

Would you know if only MoOde is installed. Would the fan be in auto mode or would it be on all the time. With only MoOde, I do not know how to execute the one-line code to get it into auto mode. 

Thanks.

For MoOde.. to activate the fan operations... (I'm assuming you know your way around ssh, nano, and the Linux terminal. ?)

Code:

git clone https://github.com/Howchoo/pi-fan-controller.git
sudo apt install python3-pip
sudo pip3 install -r pi-fan-controller/requirements.txt
./pi-fan-controller/script/install

Then to edit the fan settings..

Code:

cd /usr/local/bin/
sudo nano fancontrol.py

and edit for your requirements.
To restart the fan..

Code:

sudo /etc/init.d/fancontrol.sh start

At any time to measure temperatures..

Code:

vcgencmd measure_temp

My experience is the same as @grumbleweed.   The fan has never switched on while running MoOde. The passive case cooling is more than enough.

Thanks, for the info

[MikeyFresh]

My experience is the same as @grumbleweed.   The fan has never switched on while running MoOde. The passive case cooling is more than enough.

I agree, I never connected the fan at all. Right now with chillier winter time ambient temps in NY, I have a 4B board running absolutely cool to the touch in the original Argon One case.