08-27-2021, 09:41 PM
(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie,
Please try the following link:
From Adrian istruction
Regards,
Francesco
Francesco,
I have connected the display that way but still nothing
Jempie
Thank you for your donation!
Instruction Guide 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi
|
08-27-2021, 09:41 PM
(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie, Francesco, I have connected the display that way but still nothing Jempie
08-27-2021, 10:39 PM
(This post was last modified: 08-27-2021, 10:55 PM by fdealexa.
Edit Reason: Complete the concept
)
(08-27-2021, 09:41 PM)Jempie Wrote:(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie, Which command are you using? You could use "mpd_oled -o 1.....
08-28-2021, 07:02 AM
(08-27-2021, 10:39 PM)fdealexa Wrote:sudo mpd_oled_service_edit -o 1 -b 21 -g 1 -f 20 -c alsa,plughw:Loopback,1(08-27-2021, 09:41 PM)Jempie Wrote:(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie,
08-28-2021, 10:06 AM
(08-28-2021, 07:02 AM)Jempie Wrote:(08-27-2021, 10:39 PM)fdealexa Wrote:sudo mpd_oled_service_edit -o 1 -b 21 -g 1 -f 20 -c alsa,plughw:Loopback,1(08-27-2021, 09:41 PM)Jempie Wrote:(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie, hi Jempie, I'm sorry to know that you are not yet able o see the wonderful mpd_oled. Let's try something else. Would you please try the next 2 things: Code: sudo reboot Code: sudo service mpd_oled status Other questions: I saw that you have 3 OLED: you are using, now, the biggest (2.4"); have you never try the others? if yes which of them? and what was the results? Regards, Francesco
08-28-2021, 01:50 PM
(08-28-2021, 10:06 AM)fdealexa Wrote:Francesco,(08-28-2021, 07:02 AM)Jempie Wrote:(08-27-2021, 10:39 PM)fdealexa Wrote:sudo mpd_oled_service_edit -o 1 -b 21 -g 1 -f 20 -c alsa,plughw:Loopback,1(08-27-2021, 09:41 PM)Jempie Wrote:(08-27-2021, 03:37 PM)fdealexa Wrote: Hi Jempie, I have try all 3 oled with no result. I'm weeks bus to make this work. If I see the pictures af the the displays I hope I got the same results. I'm new is this, absolutely no experience in programming just follow the instructions. But is seems not so easy to get this work.. I try your to steps asap. I let you know thanks for helping me out.... Jempie (08-28-2021, 01:50 PM)Jempie Wrote:(08-28-2021, 10:06 AM)fdealexa Wrote:Francesco,(08-28-2021, 07:02 AM)Jempie Wrote:(08-27-2021, 10:39 PM)fdealexa Wrote:sudo mpd_oled_service_edit -o 1 -b 21 -g 1 -f 20 -c alsa,plughw:Loopback,1(08-27-2021, 09:41 PM)Jempie Wrote: Francesco, Hi Jempie, I have found an OLED like yours. I have tried it and it is ok. Please have a look to the attachments. Bye, Francesco [img]c:\foto\foto1.jpg[/img] [img]c:\foto\foto2.jpg[/img]
08-28-2021, 06:00 PM
(08-28-2021, 05:52 PM)fdealexa Wrote:Hi Fancesco,(08-28-2021, 01:50 PM)Jempie Wrote:(08-28-2021, 10:06 AM)fdealexa Wrote:Francesco,(08-28-2021, 07:02 AM)Jempie Wrote:(08-27-2021, 10:39 PM)fdealexa Wrote: Which command are you using?sudo mpd_oled_service_edit -o 1 -b 21 -g 1 -f 20 -c alsa,plughw:Loopback,1 Really strange, I don't see the attachments. Wich rpi and mode version you use? And could you send me the wiring schematic I have rpi 3b and mode version 6 5/7.2/7.3 Tested with all three, I did not connect the dac the 9023 of audiophonics. Is that the problem???
please send the results of:
sudo service mpd_oled status and cat /boot/config.txt blob:https://web.whatsapp.com/6eea4980-43bb-460a-a1e3-10ea192cb972 blob:https://web.whatsapp.com/11db5e36-30b6-49c2-a0b2-e0a2c5d33d58
08-28-2021, 07:57 PM
I don't know if you, now, see the pictures...anyway this is the cabling (the same reported in the github)
https://github.com/antiprism/mpd_oled CS : 24 DC : 18 RES : 22 SDA : 19 SCL : 23 VCC : 17 (or 1) GND : 14 (or 9) the number are related at the pin numbers of the connector: https://www.raspberrypi-spy.co.uk/2012/0...-and-pins/ please do not hesitate to ask, if any doubt. Regards, Francesco
08-29-2021, 09:44 AM
(08-28-2021, 07:57 PM)fdealexa Wrote: I don't know if you, now, see the pictures...anyway this is the cabling (the same reported in the github) francesco connection display the same wires on the right connector board RPI4 |
« Next Oldest | Next Newest »
|