Official moOde 8 support thread

[Tim Curtis]

Clear Browser cache.

[PERRLA]

Hello, I'm not sure if I should post this here or start a new thread. My pi4b unit was confirmed working with volumio but I want to use moode. Could someone please confirm if I have the steps correct when setting up a raspberry pi4b with moode audio?

I download the moode to my PC, reformatted the SD card, used Balena Etcher to flash from file to the sd card, insert SD card in to pi4b, insert ethernet cable, plug in power source. Nothing happens, when I use the app, FING, I don't see the pi on the network.

Not sure where to go from here. Thanks for any help.

[DRONE7]

Nothing happens, when I use the app, FING, I don't see the pi on the network.

Nothing ? No Power LED ? No activity LEDs ?     Then check that the power supply connections are made and that the switch is on.

[Wheel_nut]

Perrla. Have you followed the instructions to set up moOde to connect to your network, either using the Ethernet cable method or the moOde "hotspot" method?

Robin

[PERRLA]

Nothing happens, when I use the app, FING, I don't see the pi on the network.

Nothing ? No Power LED ? No activity LEDs ?     Then check that the power supply connections are made and that the switch is on.

The red power light is on and beside it a green light flickers for a short period but then stops.  I've been running moode for the past year but it stopped working a month ago. I was running an older version so thought perhaps I should install the latest. I can install volumio using the "hotspot" method.  The direct ethernet cable in method did not seem to work for moode or volumio.  The hotspot method does not work with moode, ie.  I don't see moode as an option in my wifi settings.

[Sehnsucht]

Has anything changed regarding Samba in v8.0.2?  I've just upgraded and everything's fine except I can't see my USB drive via the Android app x-plore.  I can see my v7 instance, and other shares (on other linux boxes - both Pis and Ubuntu) from the app.  And I can see my v8.0.2 USB share from my Ubuntu desktop, so I know moode is configured correctly.  And I can control the mpd (see all tracks, and play them) on the v7 and v8.0.2 instance from the same phone I'm having problems with x-plore from, so there's no network problem there.   And this phone/app combination worked fine before I upgraded to v8.0.2. 

I've tried samba v1 and 2.

The error when using samba v1 is: "java.io.exception: This client does not support the negotiated dialect"
and v2 is "invalid SMB status: STATUS_ACCESS_DENIED".

It's not the end of the world for me - I'm far more likely to manage the music from a desktop - but it might cause problems for people who exclusively use that app/android/whatever this problem involves.

[Jedrek]

Another problem is the device freezes when paused and after trying to start playback a few minutes later. The problem only occurs with version 8.0.2 and not with version 7.6.1. Playback cannot be resumed. The green LED is permanently on. The device does not respond - the website does not load, and the akream LCD responds only to touch, but there is no other reaction.



Once again I recorded, downloaded and recorded the image on the SD card. I reconfigured the equipment. It doesn't help. If I pause the music for about 20-30 minutes, playback cannot continue after that. Moode website stops working, display wakes up after a delay but does not respond to functions. Touch works. The green LED is on continuously. On MOODE 7.6.1. there are no such problems.

[fdealexa]

Nothing happens, when I use the app, FING, I don't see the pi on the network.

Nothing ? No Power LED ? No activity LEDs ?     Then check that the power supply connections are made and that the switch is on.

The red power light is on and beside it a green light flickers for a short period but then stops.  I've been running moode for the past year but it stopped working a month ago.  I was running an older version so thought perhaps I should install the latest.  I can install volumio using the "hotspot" method.  The direct ethernet cable in method did not seem to work for moode or volumio.  The hotspot method does not work with moode, ie.  I don't see moode as an option in my wifi settings.

Hi Perrla,
It looks like a wrong image is on.
What tool have you used to unzip the file?
Do the RJ45 (ethernet) led's blink? It may be a broken Lan cable.
Please let us know.
Regards,
Francesco

[AndromedaStrain]

Hi to all

I've Problem:

In MoOde 8.0.2
activated local BT than
I've try to configure BlueZ for the output stream but is impossible to submit status to the Bluetooth controller.
than i.e. is impossible to stream via BT speakers..
can be a solution?? wrong somentings
tnks

[AndromedaStrain]

Hi to all

I've Problem:

In MoOde 8.0.2
activated local BT than
I've try to configure BlueZ for the output stream but is impossible to submit status to the Bluetooth controller.
than i.e. is impossible to stream via BT speakers..
can be a solution?? wrong somentings
tnks

sorry my mistake I've FOUND  SOLUTION!!