Login

charlesky · 07-07-2022, 10:37 AM

Editing the parametric EQ pops an error in 8.1.1.

Configure->Audio->Param EQ Edit button brings up the editing page as before. But if you make an edit and then click Save, you get a 'This page isn't working' error, 'moode.local is currently unable to handle this request'.
The changes made to the EQ are saved, however, so it seems this is simply a problem with the http code.

Editing the graphic EQ seems fine.

**Tim Curtis** · 07-07-2022, 11:31 AM

I can repro. Fixed in upcoming 8.1.2 release :-)

hestehandler · 07-13-2022, 02:12 PM

My Pi is Ethernet RJ45 connected (with a static IP). It seems there is no way to disable WiFi? On every reboot it spends an annoyingly long time probing the WiFi:

Code:
20220713 160456 worker: Platform  (Pi-4B 1.1 4GB)

20220713 160456 worker: ARM arch  (aarch64, 64-bit)

20220713 160456 worker: MPD ver   (0.23.5)

20220713 160456 worker: CPU gov   (ondemand)

20220713 160456 worker: USB boot  (enabled)

20220713 160456 worker: File sys  (expanded)

20220713 160456 worker: HDMI port (On)

20220713 160456 worker: Sys LED0  (Off)

20220713 160456 worker: Sys LED1  (Off)

20220713 160456 worker: --

20220713 160456 worker: -- Network

20220713 160456 worker: --

20220713 160456 worker: eth0 adapter exists

20220713 160456 worker: eth0 check for address (No)

20220713 160456 worker: IP addr (192.168.1.5)

20220713 160456 worker: Netmask (255.255.255.0)

20220713 160456 worker: Gateway (192.168.1.1)

20220713 160456 worker: Pri DNS (194.134.5.55)

20220713 160456 worker: Domain  ()

20220713 160456 worker: wlan0 adapter exists

20220713 160456 worker: wlan0 country (NL)

20220713 160456 worker: wlan0 check 0 for IP address

20220713 160458 worker: wlan0 check 1 for IP address

20220713 160500 worker: wlan0 check 2 for IP address

20220713 160502 worker: wlan0 check 3 for IP address

20220713 160504 worker: wlan0 check 4 for IP address

20220713 160506 worker: wlan0 check 5 for IP address

20220713 160508 worker: wlan0 check 6 for IP address

20220713 160528 worker: wlan0 check 7 for IP address

20220713 160530 worker: wlan0 check 8 for IP address

20220713 160532 worker: wlan0 check 9 for IP address

20220713 160534 worker: wlan0 check 10 for IP address

20220713 160536 worker: wlan0 check 11 for IP address

20220713 160538 worker: wlan0 check 12 for IP address

20220713 160540 worker: wlan0 check 13 for IP address

20220713 160542 worker: wlan0 check 14 for IP address

20220713 160545 worker: wlan0 check 15 for IP address

20220713 160547 worker: wlan0 check 16 for IP address

20220713 160549 worker: wlan0 check 17 for IP address

20220713 160551 worker: wlan0 check 18 for IP address

20220713 160553 worker: wlan0 check 19 for IP address

20220713 160555 worker: wlan0 check 20 for IP address

20220713 160557 worker: wlan0 check 21 for IP address

20220713 160559 worker: wlan0 check 22 for IP address

20220713 160601 worker: wlan0 check 23 for IP address

20220713 160603 worker: wlan0 check 24 for IP address

20220713 160605 worker: wlan0 check 25 for IP address

20220713 160607 worker: wlan0 check 26 for IP address

20220713 160609 worker: wlan0 check 27 for IP address

20220713 160611 worker: wlan0 check 28 for IP address

20220713 160613 worker: wlan0 check 29 for IP address

20220713 160615 worker: wlan0 check 30 for IP address

20220713 160617 worker: wlan0 check 31 for IP address

20220713 160619 worker: wlan0 check 32 for IP address

20220713 160621 worker: wlan0 check 33 for IP address

20220713 160623 worker: wlan0 check 34 for IP address

20220713 160625 worker: wlan0 check 35 for IP address

20220713 160628 worker: wlan0 check 36 for IP address

20220713 160630 worker: wlan0 check 37 for IP address

20220713 160632 worker: wlan0 check 38 for IP address

20220713 160634 worker: wlan0 check 39 for IP address

20220713 160636 worker: wlan0 check 40 for IP address

20220713 160638 worker: wlan0 check 41 for IP address

20220713 160640 worker: wlan0 check 42 for IP address

20220713 160642 worker: wlan0 check 43 for IP address

20220713 160644 worker: wlan0 check 44 for IP address

20220713 160646 worker: wlan0 SSID is blank

20220713 160646 worker: wlan0 AP mode not started (eth0 active)

20220713 160646 worker: wlan0 address not assigned

20220713 160646 worker: wlan0 power save disabled

20220713 160646 worker: --

20220713 160646 worker: -- Audio config

20220713 160646 worker: --

20220713 160646 worker: MPD conf updated

20220713 160646 worker: ALSA card number (0)

20220713 160646 worker: MPD audio output (HiFiBerry Digi+ Pro)

20220713 160647 worker: Audio formats (S16_LE, S24_LE)

20220713 160647 worker: ALSA mixer name (none)

20220713 160647 worker: MPD mixer type (fixed 0dB)

20220713 160647 worker: Hdwr volume controller not detected

20220713 160647 worker: ALSA output mode (Direct: hw)

20220713 160647 worker: ALSA loopback (Off)

20220713 160647 worker: Reset renderer active flags

20220713 160647 worker: CamillaDSP (off)

20220713 160647 worker: --

20220713 160647 worker: -- MPD startup

20220713 160647 worker: --

20220713 160648 worker: MPD started

20220713 160648 worker: MPD accepting connections

20220713 160648 worker: MPD output 1 ALSA Default (On)

20220713 160648 worker: MPD output 2 ALSA Bluetooth (Off)

20220713 160648 worker: MPD output 3 HTTP Server (Off)

20220713 160648 worker: MPD crossfade (off)

20220713 160648 worker: MPD ignore CUE files (yes)

20220713 160648 worker: --

20220713 160648 worker: -- Music sources

20220713 160648 worker: --

20220713 160648 worker: USB sources (none attached)

20220713 160650 worker: NAS sources (mountall initiated)

20220713 160650 worker: --

20220713 160650 worker: -- Feature availability

20220713 160650 worker: --

20220713 160650 worker: Source select (available)

20220713 160650 worker: Source select (source: MPD)

20220713 160650 worker: Source select (output: HiFiBerry Digi+ Pro)

20220713 160650 worker: Bluetooth (available)

20220713 160650 worker: Airplay renderer (available)

20220713 160650 worker: Spotify renderer (available)

20220713 160650 worker: Squeezelite (available)

20220713 160650 worker: RoonBridge renderer (not installed)

20220713 160650 worker: Multiroom sender (available)

20220713 160650 worker: Multiroom receiver (available)

20220713 160650 worker: UPnP renderer (available: started)

20220713 160650 worker: DLNA server (available)

20220713 160650 worker: GPIO button handler (available)

20220713 160650 worker: Stream recorder (n/a)

20220713 160650 worker: --

20220713 160650 worker: -- Other

20220713 160650 worker: --

20220713 160650 worker: USB volume knob (Off)

20220713 160650 worker: USB auto-mounter (udisks-glue)

20220713 160650 worker: Saved MPD vol level (0)

20220713 160650 worker: Preamp volume level (0)

20220713 160650 worker: MPD volume level (0) restored

20220713 160650 worker: ALSA volume level (None)

20220713 160650 worker: Auto-play (Off)

20220713 160650 worker: CoverView toggle (-off)

20220713 160650 worker: Maintenance interval (120 minutes)

20220713 160650 worker: Screen saver activation (Never)

20220713 160650 worker: Session permissions (OK)

20220713 160650 worker: Watchdog started

Is this expected behaviour?

Mr.R0b0t · (This post was last modified: 07-13-2022, 03:04 PM by Mr.R0b0t.)

delete

**Tim Curtis** · 07-13-2022, 04:00 PM

(07-13-2022, 02:12 PM)hestehandler Wrote: My Pi is Ethernet RJ45 connected (with a static IP). It seems there is no way to disable WiFi? On every reboot it spends an annoyingly long time probing the WiFi:

Code:
20220713 160456 worker: Platform (Pi-4B 1.1 4GB) 20220713 160456 worker: ARM arch (aarch64, 64-bit) 20220713 160456 worker: MPD ver (0.23.5) 20220713 160456 worker: CPU gov (ondemand) 20220713 160456 worker: USB boot (enabled) 20220713 160456 worker: File sys (expanded) 20220713 160456 worker: HDMI port (On) 20220713 160456 worker: Sys LED0 (Off) 20220713 160456 worker: Sys LED1 (Off) 20220713 160456 worker: -- 20220713 160456 worker: -- Network 20220713 160456 worker: -- 20220713 160456 worker: eth0 adapter exists 20220713 160456 worker: eth0 check for address (No) 20220713 160456 worker: IP addr (192.168.1.5) 20220713 160456 worker: Netmask (255.255.255.0) 20220713 160456 worker: Gateway (192.168.1.1) 20220713 160456 worker: Pri DNS (194.134.5.55) 20220713 160456 worker: Domain () 20220713 160456 worker: wlan0 adapter exists 20220713 160456 worker: wlan0 country (NL) 20220713 160456 worker: wlan0 check 0 for IP address 20220713 160458 worker: wlan0 check 1 for IP address 20220713 160500 worker: wlan0 check 2 for IP address 20220713 160502 worker: wlan0 check 3 for IP address 20220713 160504 worker: wlan0 check 4 for IP address 20220713 160506 worker: wlan0 check 5 for IP address 20220713 160508 worker: wlan0 check 6 for IP address 20220713 160528 worker: wlan0 check 7 for IP address 20220713 160530 worker: wlan0 check 8 for IP address 20220713 160532 worker: wlan0 check 9 for IP address 20220713 160534 worker: wlan0 check 10 for IP address 20220713 160536 worker: wlan0 check 11 for IP address 20220713 160538 worker: wlan0 check 12 for IP address 20220713 160540 worker: wlan0 check 13 for IP address 20220713 160542 worker: wlan0 check 14 for IP address 20220713 160545 worker: wlan0 check 15 for IP address 20220713 160547 worker: wlan0 check 16 for IP address 20220713 160549 worker: wlan0 check 17 for IP address 20220713 160551 worker: wlan0 check 18 for IP address 20220713 160553 worker: wlan0 check 19 for IP address 20220713 160555 worker: wlan0 check 20 for IP address 20220713 160557 worker: wlan0 check 21 for IP address 20220713 160559 worker: wlan0 check 22 for IP address 20220713 160601 worker: wlan0 check 23 for IP address 20220713 160603 worker: wlan0 check 24 for IP address 20220713 160605 worker: wlan0 check 25 for IP address 20220713 160607 worker: wlan0 check 26 for IP address 20220713 160609 worker: wlan0 check 27 for IP address 20220713 160611 worker: wlan0 check 28 for IP address 20220713 160613 worker: wlan0 check 29 for IP address 20220713 160615 worker: wlan0 check 30 for IP address 20220713 160617 worker: wlan0 check 31 for IP address 20220713 160619 worker: wlan0 check 32 for IP address 20220713 160621 worker: wlan0 check 33 for IP address 20220713 160623 worker: wlan0 check 34 for IP address 20220713 160625 worker: wlan0 check 35 for IP address 20220713 160628 worker: wlan0 check 36 for IP address 20220713 160630 worker: wlan0 check 37 for IP address 20220713 160632 worker: wlan0 check 38 for IP address 20220713 160634 worker: wlan0 check 39 for IP address 20220713 160636 worker: wlan0 check 40 for IP address 20220713 160638 worker: wlan0 check 41 for IP address 20220713 160640 worker: wlan0 check 42 for IP address 20220713 160642 worker: wlan0 check 43 for IP address 20220713 160644 worker: wlan0 check 44 for IP address 20220713 160646 worker: wlan0 SSID is blank 20220713 160646 worker: wlan0 AP mode not started (eth0 active) 20220713 160646 worker: wlan0 address not assigned 20220713 160646 worker: wlan0 power save disabled 20220713 160646 worker: -- 20220713 160646 worker: -- Audio config 20220713 160646 worker: -- 20220713 160646 worker: MPD conf updated 20220713 160646 worker: ALSA card number (0) 20220713 160646 worker: MPD audio output (HiFiBerry Digi+ Pro) 20220713 160647 worker: Audio formats (S16_LE, S24_LE) 20220713 160647 worker: ALSA mixer name (none) 20220713 160647 worker: MPD mixer type (fixed 0dB) 20220713 160647 worker: Hdwr volume controller not detected 20220713 160647 worker: ALSA output mode (Direct: hw) 20220713 160647 worker: ALSA loopback (Off) 20220713 160647 worker: Reset renderer active flags 20220713 160647 worker: CamillaDSP (off) 20220713 160647 worker: -- 20220713 160647 worker: -- MPD startup 20220713 160647 worker: -- 20220713 160648 worker: MPD started 20220713 160648 worker: MPD accepting connections 20220713 160648 worker: MPD output 1 ALSA Default (On) 20220713 160648 worker: MPD output 2 ALSA Bluetooth (Off) 20220713 160648 worker: MPD output 3 HTTP Server (Off) 20220713 160648 worker: MPD crossfade (off) 20220713 160648 worker: MPD ignore CUE files (yes) 20220713 160648 worker: -- 20220713 160648 worker: -- Music sources 20220713 160648 worker: -- 20220713 160648 worker: USB sources (none attached) 20220713 160650 worker: NAS sources (mountall initiated) 20220713 160650 worker: -- 20220713 160650 worker: -- Feature availability 20220713 160650 worker: -- 20220713 160650 worker: Source select (available) 20220713 160650 worker: Source select (source: MPD) 20220713 160650 worker: Source select (output: HiFiBerry Digi+ Pro) 20220713 160650 worker: Bluetooth (available) 20220713 160650 worker: Airplay renderer (available) 20220713 160650 worker: Spotify renderer (available) 20220713 160650 worker: Squeezelite (available) 20220713 160650 worker: RoonBridge renderer (not installed) 20220713 160650 worker: Multiroom sender (available) 20220713 160650 worker: Multiroom receiver (available) 20220713 160650 worker: UPnP renderer (available: started) 20220713 160650 worker: DLNA server (available) 20220713 160650 worker: GPIO button handler (available) 20220713 160650 worker: Stream recorder (n/a) 20220713 160650 worker: -- 20220713 160650 worker: -- Other 20220713 160650 worker: -- 20220713 160650 worker: USB volume knob (Off) 20220713 160650 worker: USB auto-mounter (udisks-glue) 20220713 160650 worker: Saved MPD vol level (0) 20220713 160650 worker: Preamp volume level (0) 20220713 160650 worker: MPD volume level (0) restored 20220713 160650 worker: ALSA volume level (None) 20220713 160650 worker: Auto-play (Off) 20220713 160650 worker: CoverView toggle (-off) 20220713 160650 worker: Maintenance interval (120 minutes) 20220713 160650 worker: Screen saver activation (Never) 20220713 160650 worker: Session permissions (OK) 20220713 160650 worker: Watchdog started

Is this expected behaviour?

Open System Config and either turn the integrated WiFi adapter off or set the IP address timeout to the minimum of 10 secs.

hestehandler · 07-13-2022, 04:06 PM

(07-13-2022, 04:00 PM)Tim Curtis Wrote: Open System Config and either turn the integrated WiFi adapter off or set the IP address timeout to the minimum of 10 secs.

Found it. Perfect, thanks.

Mr.R0b0t · 07-14-2022, 03:00 PM

My problem has been going on for several versions.
No camilla sound. The sound is via stream, http but not directly on the hifi. The pipeline log shows 500 Internal Server Error

Server got itself in trouble

ciro73 · 07-14-2022, 08:52 PM

Hi Guys,

fresh installed 8.1.2 64bit release on a Raspi 3B+ with a local 7" Touchscreen LCD
After the boot is finished (login) the screen turns black, a flicking on the screen and then I jumps back to the cl

Code:
pi@moode:~ $ moodeutl --revision

0xa020d3 3B+ 1.3 1GB Sony UK BCM2837

pi@moode:~ $ moodeutl --mooderel

8.1.2 2022-07-08

pi@moode:~ $ uname -a

Linux moode 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux

Local UI is activated and it worked with 8.0 release
In the xorg.log I can see that /dev/dri/card0 is missing. Not sure if this is normal
Let me know if I should provide log files
thanks

cheers
Ciro

**TheOldPresbyope** · 07-15-2022, 02:05 AM

(07-14-2022, 08:52 PM)ciro73 Wrote: Hi Guys,

fresh installed 8.1.2 64bit release on a Raspi 3B+ with a local 7" Touchscreen LCD
After the boot is finished (login) the screen turns black, a flicking on the screen and then I jumps back to the cl

Code:
pi@moode:~ $ moodeutl --revision 0xa020d3 3B+ 1.3 1GB Sony UK BCM2837 pi@moode:~ $ moodeutl --mooderel 8.1.2 2022-07-08 pi@moode:~ $ uname -a Linux moode 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux

Local UI is activated and it worked with 8.0 release
In the xorg.log I can see that /dev/dri/card0 is missing. Not sure if this is normal
Let me know if I should provide log files
thanks

cheers
Ciro

Hi, Ciro.

I have moOde 8.1.2 running on a Pi3B+ with official 7" LCD touchscreen display attached. It runs fine using an official Raspberry Pi power supply but exhibits behavior similar to what you report when I use a no-name power supply I got "somewhere". I don't really want to try reinstalling 8.0 but my memory is that with it I could get away with using the no-name power supply.

That "missing card" Xorg error message is benign. (There's no /dev/dri directory in Raspberry Pi OS; there is in my Linux Mint desktop and the /dev/dri/card0 file exists but is empty.)

Regards,
Kent

ciro73 · 07-15-2022, 05:56 AM

(07-15-2022, 02:05 AM)TheOldPresbyope Wrote: Hi, Ciro.

I have moOde 8.1.2 running on a Pi3B+ with official 7" LCD touchscreen display attached. It runs fine using an official Raspberry Pi power supply but exhibits behavior similar to what you report when I use a no-name power supply I got "somewhere". I don't really want to try reinstalling 8.0 but my memory is that with it I could get away with using the no-name power supply.

That "missing card" Xorg error message is benign. (There's no /dev/dri directory in Raspberry Pi OS; there is in my Linux Mint desktop and the /dev/dri/card0 file exists but is empty.)

Regards,
Kent

Hi @TheOldPresbyope thank you for sharing your experience Cool

I'm using a 12V 3.6A PSU connected over the HiFiBerry Amp2 but I will give it a try with a official PSU (5.1V 3A) what I have here and report back
I will also try the 32Bit Version, if I found my other SD 16GB Cards Big Grin

cheers
Ciro

Login
Username:
Password:	Lost Password?
	Remember me