Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Can't connect to wifi Raspberry Pi 3A+
#1
Has anyone tested Moode recently with a Raspberry Pi 3A+?

I am able to access Moode just fine through ethernet cable or through it's wireless access point but after filling in my router's wifi SSID and Password in the UI, saving and restarting, the connection is not made, instead the Moode access point is started again.


In my router I have configured WPA2-PSK/WPA3-SAE mixed mode (CCMP).

Other things to note:
  • I see some attempts in my router's log from the Raspberry Pi MAC address saying "possible psk mismatch" so it seems it is not able to complete the handshake?
  • It's also not connecting when using Volumio and HiFiberryOS from the same device
  • However, another OS, Kerberos (kerberos.io) is able to connect just fine to wifi from the same device
Reply
#2
(02-12-2023, 01:36 PM)adam_zzz Wrote: Has anyone tested Moode recently with a Raspberry Pi 3A+?

I am able to access Moode just fine through ethernet cable or through it's wireless access point but after filling in my router's wifi SSID and Password in the UI, saving and restarting, the connection is not made, instead the Moode access point is started again.


In my router I have configured WPA2-PSK/WPA3-SAE mixed mode (CCMP).

Other things to note:
  • I see some attempts in my router's log from the Raspberry Pi MAC address saying "possible psk mismatch" so it seems it is not able to complete the handshake?
  • It's also not connecting when using Volumio and HiFiberryOS from the same device
  • However, another OS, Kerberos (kerberos.io) is able to connect just fine to wifi from the same device

See also: https://moodeaudio.org/forum/showthread....0#pid45150
Reply
#3
Some info in this Raspberry Pi Linux issue
https://github.com/raspberrypi/linux/issues/4718

One of the posters mentions adding some params to spa_supplicantl.conf
https://github.com/raspberrypi/linux/iss...1214411359

ETA: Ran a quick test with a 3A+ and no issues with WiFi connecting to my Router running WPA2-PSK.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#4
(02-12-2023, 03:04 PM)Tim Curtis Wrote: Some info in this Raspberry Pi Linux issue
https://github.com/raspberrypi/linux/issues/4718

One of the posters mentions adding some params to spa_supplicantl.conf
https://github.com/raspberrypi/linux/iss...1214411359

ETA: Ran a quick test with a 3A+ and no issues with WiFi connecting to my Router running WPA2-PSK.

Thanks for checking and for the suggestions!
I have realized after a few hours of trying to put different things in wpa_supplicant.conf that probably they are not taken into effect... I have changed the SSID with a test string in the file but in the UI still the old one shows, the same in the log after rebooting when calling "moodeutl -l".

Is there anything I need to run in order for the wpa_supplicant.conf to be used?
What I did so far:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf 
Ctrl +X , and Y
sudo reboot



Edit: When running "sudo wpa_cli" I get this message:
openat(AT_FDCWD, "/var/run/wpa_supplicant", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
pselect6(1, [], [], [], {tv_sec=0, tv_nsec=999998000}, NULL) = 0 (Timeout)
Reply
#5
(02-12-2023, 02:11 PM)Sehnsucht Wrote: See also: https://moodeaudio.org/forum/showthread....0#pid45150

Hi Sehnsucht,
The result of moodeutl -l:

20230212 054535 worker: --
20230212 054535 worker: -- Start moOde 8 series
20230212 054535 worker: --
20230212 054535 worker: Successfully daemonized
20230212 054539 worker: File check (OK)
20230212 054540 worker: Session vacuumed
20230212 054540 worker: Session loaded
20230212 054540 worker: Debug logging (OFF)
20230212 054540 worker: --
20230212 054540 worker: -- Audio debug
20230212 054540 worker: --
20230212 054540 worker: ALSA cards: (0:b1 | 1:Headphones | 2:empty | 3:empty
20230212 054540 worker: MPD config: (0Tonguei HDMI 1 | mixerSadHDMI) | card:0)
20230212 054541 worker: ALSA mixer actual (HDMI)
20230212 054541 worker: ALSA HDMI volume set to (0%)
20230212 054541 worker: --
20230212 054541 worker: -- System
20230212 054541 worker: --
20230212 054543 worker: Host      (moode)
20230212 054543 worker: moOde     (8.2.5 2023-01-20)
20230212 054543 worker: RaspiOS   (11.6)
20230212 054543 worker: Kernel    (5.15.84-v8+ #1613)
20230212 054543 worker: Platform  (Pi-3A+ 1.0 512MB)
20230212 054543 worker: ARM arch  (aarch64, 64-bit)
20230212 054543 worker: MPD ver   (0.23.11)
20230212 054543 worker: CPU gov   (ondemand)
20230212 054543 worker: USB boot  (not enabled yet)
20230212 054543 worker: File sys  (expanded)
20230212 054543 worker: HDMI port (On)
20230212 054543 worker: Sys LED0  (On)
20230212 054543 worker: Sys LED1  (On)
20230212 054543 worker: --
20230212 054543 worker: -- Network
20230212 054543 worker: --
20230212 054543 worker: eth0 adapter does not exist
20230212 054543 worker: eth0 address not assigned
20230212 054543 worker: wlan0 adapter exists
20230212 054543 worker: wlan0 country (NL)
20230212 054543 worker: wlan0 trying configured SSID (HOMENETWORK)
20230212 054543 worker: wlan0 check 0 for IP address
20230212 054545 worker: wlan0 check 1 for IP address
20230212 054547 worker: wlan0 check 2 for IP address
20230212 054549 worker: wlan0 check 3 for IP address
20230212 054551 worker: wlan0 check 4 for IP address
20230212 054553 worker: wlan0 check 5 for IP address
20230212 054556 worker: wlan0 check 6 for IP address
20230212 054558 worker: wlan0 check 7 for IP address
20230212 054600 worker: wlan0 check 8 for IP address
20230212 054602 worker: wlan0 check 9 for IP address
20230212 054604 worker: wlan0 check 10 for IP address
20230212 054606 worker: wlan0 check 11 for IP address
20230212 054608 worker: wlan0 check 12 for IP address
20230212 054610 worker: wlan0 check 13 for IP address
20230212 054612 worker: wlan0 check 14 for IP address
20230212 054614 worker: wlan0 check 15 for IP address
20230212 054616 worker: wlan0 check 16 for IP address
20230212 054618 worker: wlan0 check 17 for IP address
20230212 054620 worker: wlan0 check 18 for IP address
20230212 054622 worker: wlan0 check 19 for IP address
20230212 054624 worker: wlan0 check 20 for IP address
20230212 054626 worker: wlan0 check 21 for IP address
20230212 054628 worker: wlan0 check 22 for IP address
20230212 054630 worker: wlan0 check 23 for IP address
20230212 054632 worker: wlan0 check 24 for IP address
20230212 054634 worker: wlan0 check 25 for IP address
20230212 054637 worker: wlan0 check 26 for IP address
20230212 054639 worker: wlan0 check 27 for IP address
20230212 054641 worker: wlan0 check 28 for IP address
20230212 054643 worker: wlan0 check 29 for IP address
20230212 054645 worker: wlan0 check 30 for IP address
20230212 054647 worker: wlan0 check 31 for IP address
20230212 054649 worker: wlan0 check 32 for IP address
20230212 054651 worker: wlan0 check 33 for IP address
20230212 054653 worker: wlan0 check 34 for IP address
20230212 054655 worker: wlan0 check 35 for IP address
20230212 054657 worker: wlan0 check 36 for IP address
20230212 054659 worker: wlan0 check 37 for IP address
20230212 054701 worker: wlan0 check 38 for IP address
20230212 054703 worker: wlan0 check 39 for IP address
20230212 054705 worker: wlan0 check 40 for IP address
20230212 054707 worker: wlan0 check 41 for IP address
20230212 054709 worker: wlan0 check 42 for IP address
20230212 054711 worker: wlan0 check 43 for IP address
20230212 054713 worker: wlan0 check 44 for IP address
20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)
20230212 054715 worker: wlan0 AP mode started
20230212 054727 worker: IP addr (172.24.1.1)
20230212 054727 worker: Netmask (255.255.255.0)
20230212 054727 worker: Gateway (0.0.0.0)
20230212 054727 worker: Pri DNS (127.0.0.1)
20230212 054727 worker: Domain  ()
20230212 054727 worker: wlan0 power save disabled
20230212 054727 worker: apd0 router mode (Off)
20230212 054727 worker: --
20230212 054727 worker: -- Software update
20230212 054727 worker: --
20230212 054727 worker: Automatic check (Off)
20230212 054727 worker: --
20230212 054727 worker: -- Audio config
20230212 054727 worker: --
20230212 054728 worker: MPD conf updated
20230212 054728 worker: ALSA card number (0)
20230212 054728 worker: MPD audio output (Pi HDMI 1)
20230212 054728 worker: Audio formats (U8, S16_LE)
20230212 054728 worker: ALSA mixer name (HDMI)
20230212 054728 worker: MPD mixer type (hardware)
20230212 054728 worker: Hdwr volume controller exists
20230212 054728 worker: Max ALSA volume (100%)
20230212 054728 worker: ALSA output mode (Default: plughw)
20230212 054728 worker: ALSA loopback (Off)
20230212 054728 worker: Reset renderer active flags
20230212 054728 worker: CamillaDSP (off)
20230212 054728 worker: --
20230212 054728 worker: -- File sharing
20230212 054728 worker: --
20230212 054728 worker: SMB file sharing (Off)
20230212 054728 worker: NFS file sharing (Off)
20230212 054728 worker: --
20230212 054728 worker: -- MPD startup
20230212 054728 worker: --
20230212 054729 worker: MPD started
20230212 054729 worker: MPD accepting connections
20230212 054729 worker: MPD output 1 ALSA Default (On)
20230212 054729 worker: MPD output 2 ALSA Bluetooth (Off)
20230212 054729 worker: MPD output 3 HTTP Server (Off)
20230212 054729 worker: MPD crossfade (off)
20230212 054729 worker: MPD ignore CUE files (yes)
20230212 054729 worker: Default playlist loaded for first boot
20230212 054729 worker: --
20230212 054729 worker: -- Music sources
20230212 054729 worker: --
20230212 054729 worker: USB sources
20230212 054729 worker: No drives found
20230212 054729 worker: NAS sources
20230212 054729 worker: None configured
20230212 054729 worker: --
20230212 054729 worker: -- Feature availability
20230212 054729 worker: --
20230212 054729 worker: Input select (available)
20230212 054729 worker: Input (MPD)
20230212 054729 worker: Output (Pi HDMI 1)
20230212 054729 worker: Bluetooth (available)
20230212 054729 worker: AirPlay renderer (available)
20230212 054729 worker: Spotify renderer (available)
20230212 054729 worker: Squeezelite (available)
20230212 054729 worker: RoonBridge renderer (not installed)
20230212 054729 worker: Multiroom sender (available)
20230212 054729 worker: Multiroom receiver (available)
20230212 054729 worker: UPnP renderer (available)
20230212 054729 worker: DLNA server (available)
20230212 054729 worker: GPIO button handler (available)
20230212 054729 worker: Stream recorder (n/a)
20230212 054729 worker: HTTPS-Only mode (n/a)
20230212 054729 worker: --
20230212 054729 worker: -- Other
20230212 054729 worker: --
20230212 054729 worker: USB volume knob (Off)
20230212 054729 worker: USB auto-mounter (udisks-glue)
20230212 054729 worker: Saved MPD vol level (0)
20230212 054729 worker: Preamp volume level (0)
20230212 054730 worker: MPD volume level (0) restored
20230212 054730 worker: ALSA HDMI volume (0%)
20230212 054730 worker: Auto-play (Off)
20230212 054730 worker: LocalUI (Off)
20230212 054730 worker: Automatic CoverView (Off)
20230212 054730 worker: On-screen keyboard (Off)
20230212 054730 worker: Library scope (all)
20230212 054730 worker: View reset to playback
20230212 054730 worker: Maintenance interval (360 minutes)
20230212 054730 worker: Screen saver activation (Never)
20230212 054730 worker: Session permissions (OK)
20230212 054730 worker: Mount monitor (Off)
20230212 054730 worker: Watchdog started
20230212 054730 worker: Ready
Reply
#6
(02-12-2023, 04:53 PM)adam_zzz Wrote:
(02-12-2023, 03:04 PM)Tim Curtis Wrote: Some info in this Raspberry Pi Linux issue
https://github.com/raspberrypi/linux/issues/4718

One of the posters mentions adding some params to spa_supplicantl.conf
https://github.com/raspberrypi/linux/iss...1214411359

ETA: Ran a quick test with a 3A+ and no issues with WiFi connecting to my Router running WPA2-PSK.

Thanks for checking and for the suggestions!
I have realized after a few hours of trying to put different things in wpa_supplicant.conf that probably they are not taken into effect... I have changed the SSID with a test string in the file but in the UI still the old one shows, the same in the log after rebooting when calling "moodeutl -l".

Is there anything I need to run in order for the wpa_supplicant.conf to be used?
What I did so far:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf 
Ctrl +X , and Y
sudo reboot



Edit: When running "sudo wpa_cli" I get this message:
openat(AT_FDCWD, "/var/run/wpa_supplicant", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
pselect6(1, [], [], [], {tv_sec=0, tv_nsec=999998000}, NULL) = 0 (Timeout)

The Network Config page stores its entries in the cfg_network SQL table. This table is used to write wpa_supplicant.conf when SAVE is clicked.

Afterwords wpa_supplicant.conf can be manually edited with entries that are not also maintained in the SQL table, just don't subsequently SAVE from the Network Config page or it will overwrite  the file and the manual changes will be lost.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#7
(02-12-2023, 04:58 PM)adam_zzz Wrote:
(02-12-2023, 02:11 PM)Sehnsucht Wrote: See also: https://moodeaudio.org/forum/showthread....0#pid45150

Hi Sehnsucht,
The result of moodeutl -l:

20230212 054535 worker: --
20230212 054535 worker: -- Start moOde 8 series
20230212 054535 worker: --
20230212 054535 worker: Successfully daemonized
20230212 054539 worker: File check (OK)
20230212 054540 worker: Session vacuumed
20230212 054540 worker: Session loaded
20230212 054540 worker: Debug logging (OFF)
20230212 054540 worker: --
20230212 054540 worker: -- Audio debug
20230212 054540 worker: --
20230212 054540 worker: ALSA cards: (0:b1 | 1:Headphones | 2:empty | 3:empty
20230212 054540 worker: MPD config: (0Tonguei HDMI 1 | mixerSadHDMI) | card:0)
20230212 054541 worker: ALSA mixer actual (HDMI)
20230212 054541 worker: ALSA HDMI volume set to (0%)
20230212 054541 worker: --
20230212 054541 worker: -- System
20230212 054541 worker: --
20230212 054543 worker: Host      (moode)
20230212 054543 worker: moOde     (8.2.5 2023-01-20)
20230212 054543 worker: RaspiOS   (11.6)
20230212 054543 worker: Kernel    (5.15.84-v8+ #1613)
20230212 054543 worker: Platform  (Pi-3A+ 1.0 512MB)
20230212 054543 worker: ARM arch  (aarch64, 64-bit)
20230212 054543 worker: MPD ver   (0.23.11)
20230212 054543 worker: CPU gov   (ondemand)
20230212 054543 worker: USB boot  (not enabled yet)
20230212 054543 worker: File sys  (expanded)
20230212 054543 worker: HDMI port (On)
20230212 054543 worker: Sys LED0  (On)
20230212 054543 worker: Sys LED1  (On)
20230212 054543 worker: --
20230212 054543 worker: -- Network
20230212 054543 worker: --
20230212 054543 worker: eth0 adapter does not exist
20230212 054543 worker: eth0 address not assigned
20230212 054543 worker: wlan0 adapter exists
20230212 054543 worker: wlan0 country (NL)
20230212 054543 worker: wlan0 trying configured SSID (HOMENETWORK)
20230212 054543 worker: wlan0 check 0 for IP address
20230212 054545 worker: wlan0 check 1 for IP address
20230212 054547 worker: wlan0 check 2 for IP address
20230212 054549 worker: wlan0 check 3 for IP address
20230212 054551 worker: wlan0 check 4 for IP address
20230212 054553 worker: wlan0 check 5 for IP address
20230212 054556 worker: wlan0 check 6 for IP address
20230212 054558 worker: wlan0 check 7 for IP address
20230212 054600 worker: wlan0 check 8 for IP address
20230212 054602 worker: wlan0 check 9 for IP address
20230212 054604 worker: wlan0 check 10 for IP address
20230212 054606 worker: wlan0 check 11 for IP address
20230212 054608 worker: wlan0 check 12 for IP address
20230212 054610 worker: wlan0 check 13 for IP address
20230212 054612 worker: wlan0 check 14 for IP address
20230212 054614 worker: wlan0 check 15 for IP address
20230212 054616 worker: wlan0 check 16 for IP address
20230212 054618 worker: wlan0 check 17 for IP address
20230212 054620 worker: wlan0 check 18 for IP address
20230212 054622 worker: wlan0 check 19 for IP address
20230212 054624 worker: wlan0 check 20 for IP address
20230212 054626 worker: wlan0 check 21 for IP address
20230212 054628 worker: wlan0 check 22 for IP address
20230212 054630 worker: wlan0 check 23 for IP address
20230212 054632 worker: wlan0 check 24 for IP address
20230212 054634 worker: wlan0 check 25 for IP address
20230212 054637 worker: wlan0 check 26 for IP address
20230212 054639 worker: wlan0 check 27 for IP address
20230212 054641 worker: wlan0 check 28 for IP address
20230212 054643 worker: wlan0 check 29 for IP address
20230212 054645 worker: wlan0 check 30 for IP address
20230212 054647 worker: wlan0 check 31 for IP address
20230212 054649 worker: wlan0 check 32 for IP address
20230212 054651 worker: wlan0 check 33 for IP address
20230212 054653 worker: wlan0 check 34 for IP address
20230212 054655 worker: wlan0 check 35 for IP address
20230212 054657 worker: wlan0 check 36 for IP address
20230212 054659 worker: wlan0 check 37 for IP address
20230212 054701 worker: wlan0 check 38 for IP address
20230212 054703 worker: wlan0 check 39 for IP address
20230212 054705 worker: wlan0 check 40 for IP address
20230212 054707 worker: wlan0 check 41 for IP address
20230212 054709 worker: wlan0 check 42 for IP address
20230212 054711 worker: wlan0 check 43 for IP address
20230212 054713 worker: wlan0 check 44 for IP address
20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)
20230212 054715 worker: wlan0 AP mode started
20230212 054727 worker: IP addr (172.24.1.1)
20230212 054727 worker: Netmask (255.255.255.0)
20230212 054727 worker: Gateway (0.0.0.0)
20230212 054727 worker: Pri DNS (127.0.0.1)
20230212 054727 worker: Domain  ()
20230212 054727 worker: wlan0 power save disabled
20230212 054727 worker: apd0 router mode (Off)
20230212 054727 worker: --
20230212 054727 worker: -- Software update
20230212 054727 worker: --
20230212 054727 worker: Automatic check (Off)
20230212 054727 worker: --
20230212 054727 worker: -- Audio config
20230212 054727 worker: --
20230212 054728 worker: MPD conf updated
20230212 054728 worker: ALSA card number (0)
20230212 054728 worker: MPD audio output (Pi HDMI 1)
20230212 054728 worker: Audio formats (U8, S16_LE)
20230212 054728 worker: ALSA mixer name (HDMI)
20230212 054728 worker: MPD mixer type (hardware)
20230212 054728 worker: Hdwr volume controller exists
20230212 054728 worker: Max ALSA volume (100%)
20230212 054728 worker: ALSA output mode (Default: plughw)
20230212 054728 worker: ALSA loopback (Off)
20230212 054728 worker: Reset renderer active flags
20230212 054728 worker: CamillaDSP (off)
20230212 054728 worker: --
20230212 054728 worker: -- File sharing
20230212 054728 worker: --
20230212 054728 worker: SMB file sharing (Off)
20230212 054728 worker: NFS file sharing (Off)
20230212 054728 worker: --
20230212 054728 worker: -- MPD startup
20230212 054728 worker: --
20230212 054729 worker: MPD started
20230212 054729 worker: MPD accepting connections
20230212 054729 worker: MPD output 1 ALSA Default (On)
20230212 054729 worker: MPD output 2 ALSA Bluetooth (Off)
20230212 054729 worker: MPD output 3 HTTP Server (Off)
20230212 054729 worker: MPD crossfade (off)
20230212 054729 worker: MPD ignore CUE files (yes)
20230212 054729 worker: Default playlist loaded for first boot
20230212 054729 worker: --
20230212 054729 worker: -- Music sources
20230212 054729 worker: --
20230212 054729 worker: USB sources
20230212 054729 worker: No drives found
20230212 054729 worker: NAS sources
20230212 054729 worker: None configured
20230212 054729 worker: --
20230212 054729 worker: -- Feature availability
20230212 054729 worker: --
20230212 054729 worker: Input select (available)
20230212 054729 worker: Input (MPD)
20230212 054729 worker: Output (Pi HDMI 1)
20230212 054729 worker: Bluetooth (available)
20230212 054729 worker: AirPlay renderer (available)
20230212 054729 worker: Spotify renderer (available)
20230212 054729 worker: Squeezelite (available)
20230212 054729 worker: RoonBridge renderer (not installed)
20230212 054729 worker: Multiroom sender (available)
20230212 054729 worker: Multiroom receiver (available)
20230212 054729 worker: UPnP renderer (available)
20230212 054729 worker: DLNA server (available)
20230212 054729 worker: GPIO button handler (available)
20230212 054729 worker: Stream recorder (n/a)
20230212 054729 worker: HTTPS-Only mode (n/a)
20230212 054729 worker: --
20230212 054729 worker: -- Other
20230212 054729 worker: --
20230212 054729 worker: USB volume knob (Off)
20230212 054729 worker: USB auto-mounter (udisks-glue)
20230212 054729 worker: Saved MPD vol level (0)
20230212 054729 worker: Preamp volume level (0)
20230212 054730 worker: MPD volume level (0) restored
20230212 054730 worker: ALSA HDMI volume (0%)
20230212 054730 worker: Auto-play (Off)
20230212 054730 worker: LocalUI (Off)
20230212 054730 worker: Automatic CoverView (Off)
20230212 054730 worker: On-screen keyboard (Off)
20230212 054730 worker: Library scope (all)
20230212 054730 worker: View reset to playback
20230212 054730 worker: Maintenance interval (360 minutes)
20230212 054730 worker: Screen saver activation (Never)
20230212 054730 worker: Session permissions (OK)
20230212 054730 worker: Mount monitor (Off)
20230212 054730 worker: Watchdog started
20230212 054730 worker: Ready

You've probably already notice this:

20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)

that's the SSID the Pi has been trying to connect to for the past 90s, failing.

Is the SSID correct?
Can you triple-check that you correctly entered its password? (note: you cannot verify it in moOde's  configuration page, as it gets converted to a hash there... you might want to re-type it in ca-re-ful-ly,

There is something weird, though... even Volumio and HiFiberryOS cannot connect... and you have your router configured in miced-mode WPA2 / WPA3...
Can you quickly test with just plain WPA2? ...maybe the negotiation fails.
Reply
#8
(02-12-2023, 05:30 PM)Nutul Wrote: You've probably already notice this:

20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)

that's the SSID the Pi has been trying to connect to for the past 90s, failing.

Is the SSID correct?
Can you triple-check that you correctly entered its password? (note: you cannot verify it in moOde's  configuration page, as it gets converted to a hash there... you might want to re-type it in ca-re-ful-ly,

There is something weird, though... even Volumio and HiFiberryOS cannot connect... and you have your router configured in miced-mode WPA2 / WPA3...
Can you quickly test with just plain WPA2? ...maybe the negotiation fails.

The SSID is correct, it's 2.4Ghz , I have also tried another one on 5GHz with no luck. I have typed, pasted, double checked that there are no empty spaces, etc.
I also tried to generate the psk from the command line and checked that it matches with the hash in wpa_supplicant.config

I changed my router to use only WPA2, restarted everything and I see no change.

I think Volumio and HiFiBerryOS are also using wpa_supplicant.config but I think the other OS that worked (Kerberos.IO) may be using a different mechanism because when I checked for the same file on Kerberos.IO, this file was almost empty, at least the SSID and Psk were missing... or maybe I was looking in the wrong place. In any case the setup was a bit different there, it doesn't have an access point, I just had to add a file wireless.conf containing the SSID and password in clear text to the SD card. Maybe it's based on a different distribution also, need to flash it again and try to figure out why it works there and not on Moode...
Reply
#9
(02-12-2023, 07:00 PM)adam_zzz Wrote:
(02-12-2023, 05:30 PM)Nutul Wrote: You've probably already notice this:

20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)

that's the SSID the Pi has been trying to connect to for the past 90s, failing.

Is the SSID correct?
Can you triple-check that you correctly entered its password? (note: you cannot verify it in moOde's  configuration page, as it gets converted to a hash there... you might want to re-type it in ca-re-ful-ly,

There is something weird, though... even Volumio and HiFiberryOS cannot connect... and you have your router configured in miced-mode WPA2 / WPA3...
Can you quickly test with just plain WPA2? ...maybe the negotiation fails.

The SSID is correct, it's 2.4Ghz , I have also tried another one on 5GHz with no luck. I have typed, pasted, double checked that there are no empty spaces, etc.
I also tried to generate the psk from the command line and checked that it matches with the hash in wpa_supplicant.config

I changed my router to use only WPA2, restarted everything and I see no change.

I think Volumio and HiFiBerryOS are also using wpa_supplicant.config but I think the other OS that worked (Kerberos.IO) may be using a different mechanism because when I checked for the same file on Kerberos.IO, this file was almost empty, at least the SSID and Psk were missing... or maybe I was looking in the wrong place. In any case the setup was a bit different there, it doesn't have an access point, I just had to add a file wireless.conf containing the SSID and password in clear text to the SD card. Maybe it's based on a different distribution also, need to flash it again and try to figure out why it works there and not on Moode...

Did you try adding the lines below as described in this post ?https://github.com/raspberrypi/linux/iss...1214411359

/etc/wpa_supplicant/wpa_supplicant.conf
.
.
update_config=1

network={
ssid="ssid"
key_mgmt=WPA-PSK-SHA256
psk=psk
ieee80211w=2
}

If this doesn't work then you should try posting an issue in the Raspberry Pi Forums.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#10
(02-12-2023, 07:39 PM)Tim Curtis Wrote:
(02-12-2023, 07:00 PM)adam_zzz Wrote:
(02-12-2023, 05:30 PM)Nutul Wrote: You've probably already notice this:

20230212 054715 worker: wlan0 no IP addr for SSID (HOMENETWORK)

that's the SSID the Pi has been trying to connect to for the past 90s, failing.

Is the SSID correct?
Can you triple-check that you correctly entered its password? (note: you cannot verify it in moOde's  configuration page, as it gets converted to a hash there... you might want to re-type it in ca-re-ful-ly,

There is something weird, though... even Volumio and HiFiberryOS cannot connect... and you have your router configured in miced-mode WPA2 / WPA3...
Can you quickly test with just plain WPA2? ...maybe the negotiation fails.

The SSID is correct, it's 2.4Ghz , I have also tried another one on 5GHz with no luck. I have typed, pasted, double checked that there are no empty spaces, etc.
I also tried to generate the psk from the command line and checked that it matches with the hash in wpa_supplicant.config

I changed my router to use only WPA2, restarted everything and I see no change.

I think Volumio and HiFiBerryOS are also using wpa_supplicant.config but I think the other OS that worked (Kerberos.IO) may be using a different mechanism because when I checked for the same file on Kerberos.IO, this file was almost empty, at least the SSID and Psk were missing... or maybe I was looking in the wrong place. In any case the setup was a bit different there, it doesn't have an access point, I just had to add a file wireless.conf containing the SSID and password in clear text to the SD card. Maybe it's based on a different distribution also, need to flash it again and try to figure out why it works there and not on Moode...

Did you try adding the lines below as described in this post ?https://github.com/raspberrypi/linux/iss...1214411359

/etc/wpa_supplicant/wpa_supplicant.conf
.
.
update_config=1

network={
ssid="ssid"
key_mgmt=WPA-PSK-SHA256
psk=psk
ieee80211w=2
}

If this doesn't work then you should try posting an issue in the Raspberry Pi Forums.

I did, it didn't change anything Sad. Next week I'll try to set up wifi also on the Raspberry Pi OS and see how far I get, then I'll check also in the Raspberry Pi forums. I can also try a different router and a different Raspberry Pi model (3B+)
Reply


Forum Jump: