Posts: 40
Threads: 7
Joined: Nov 2021
Reputation:
3
06-01-2024, 01:24 PM
(This post was last modified: 06-04-2024, 10:37 AM by Venerdi.)
Hi All,
I ask for your help. I tried to install 9.01. I didn't succeed.
I believe Tim officially released 9.01, but 8.39 does not detect the possibility of an uptd.
I took a new SDcard and with Raspberry Pi Imager I inserted the 9.01 image directly.
Booting ends and moOde does not start. Only a command line appears on the screen.
This is what I see, and I'm stuck here:
![[Image: IMG-20240601-150749.jpg]](https://i.ibb.co/D96rw4R/IMG-20240601-150749.jpg)
Where am I wrong? I followed all the instructions, I enabled SHH with select "Use password authentication", I created a userid and password and set the host name and WiFi SSID
and password.
v.
Posts: 6,001
Threads: 175
Joined: Apr 2018
Reputation:
234
(06-01-2024, 01:24 PM)Venerdi Wrote: Hi All,
I ask for your help. I tried to install 9.01. I didn't succeed.
I believe Tim officially released 9.01, but 8.39 does not detect the possibility of an uptd.
I took a new SDcard and with Raspberry Pi Imager I inserted the 9.01 image directly.
Booting ends and moOde does not start. Only a command line appears on the screen.
This is what I see, and I'm stuck here:
Where am I wrong? I followed all the instructions, I enabled SHH with select "Use password authentication", I created a userid and password and set the host name and WiFi SSID
and password.
v.
@ Venerdi
Looks like it’s working fine. That password message is a leftover artifact from any earlier time and probably should removed.
Regards,
Kent
Posts: 13,376
Threads: 303
Joined: Mar 2018
Reputation:
539
06-01-2024, 02:01 PM
(This post was last modified: 06-01-2024, 02:05 PM by Tim Curtis.)
This message "** To set a new password for your userid type 'passwd'." is ok. It's how you would change your password if desired.
@ Venerdi the WebUI does not automatically appear on an attached display. Open a Browser, type http://moode, http://moode.local, or http://IP_ADDRESS_OF_PI.
Menu, Configure, Peripherals has the section the Local Display, Pi Touch etc.
Posts: 40
Threads: 7
Joined: Nov 2021
Reputation:
3
06-01-2024, 02:03 PM
(This post was last modified: 06-01-2024, 02:05 PM by Venerdi.)
(06-01-2024, 01:32 PM)TheOldPresbyope Wrote: (06-01-2024, 01:24 PM)Venerdi Wrote: Hi All,
I ask for your help. I tried to install 9.01. I didn't succeed.
I believe Tim officially released 9.01, but 8.39 does not detect the possibility of an uptd.
I took a new SDcard and with Raspberry Pi Imager I inserted the 9.01 image directly.
Booting ends and moOde does not start. Only a command line appears on the screen.
This is what I see, and I'm stuck here:
Where am I wrong? I followed all the instructions, I enabled SHH with select "Use password authentication", I created a userid and password and set the host name and WiFi SSID
and password.
v.
@Venerdi
Looks like it’s working fine. That password message is a leftover artifact from any earlier time and probably should removed.
Regards,
Kent @ TheOldPresbyope
thanks
ciao
v
Posts: 40
Threads: 7
Joined: Nov 2021
Reputation:
3
(06-01-2024, 02:01 PM)Tim Curtis Wrote: This message "** To set a new password for your userid type 'passwd'." is ok. It's how you would change your password if desired.
@Venerdi the WebUI does not automatically appear on an attached display. Open a Browser, type http://moode, http://moode.local, or http://IP_ADDRESS_OF_PI.
Menu, Configure, Peripherals has the section the Local Display, Pi Touch etc.
@Tim
Thanks, I solved the problem, but now I have two more questions to ask.
1) Until now I turned on the Pi4 and I was immediately in moOode. Now, it always asks me for login and password. How can I avoid this?
2) The picture on the TV was perfect; now, at the beginning it's full of artifacts, then it goes back to normal, but it goes partly off screen. I don't see a part on the right and the whole top part. In moOde options there is GPIO pin mappings. It can be useful?
v.
Posts: 13,376
Threads: 303
Joined: Mar 2018
Reputation:
539
Reboot and then post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
Posts: 40
Threads: 7
Joined: Nov 2021
Reputation:
3
(06-01-2024, 06:57 PM)Tim Curtis Wrote: Reboot and then post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
PHP Code: 20240601 224311 worker: --
20240601 224311 worker: -- Start moOde 9 series
20240601 224311 worker: --
20240601 224311 worker: Successfully daemonized
20240601 224311 worker: Wait for Linux startup
20240601 224317 worker: Linux startup complete
20240601 224317 worker: Boot config is ok
20240601 224317 worker: Session loaded
20240601 224319 worker: Package locks applied
20240601 224319 worker: File check complete
20240601 224319 worker: Debug logging off
20240601 224319 worker: --
20240601 224319 worker: -- System
20240601 224319 worker: --
20240601 224321 worker: Host name: moode
20240601 224321 worker: RPi model: Pi-4B 1.2 4GB
20240601 224321 worker: moOde release: 9.0.1 2024-05-30
20240601 224321 worker: RaspiOS: 12.5 Bookworm 64-bit
20240601 224321 worker: Linux Kernel: 6.6.28 64-bit
20240601 224321 worker: MPD version: 0.23.14
20240601 224321 worker: User id: admin
20240601 224321 worker: Home folder: /home/admin
20240601 224321 worker: Time zone: Europe/Rome
20240601 224321 worker: Kbd layout: it
20240601 224321 worker: HDMI ports(s): on
20240601 224321 worker: Sys LED0: on
20240601 224321 worker: Sys LED1: on
20240601 224321 worker: Reduce power: n/a
20240601 224321 worker: CPU governor: ondemand
20240601 224321 worker: Integ audio: vc4-kms-v3d
20240601 224321 worker: --
20240601 224321 worker: -- Network
20240601 224321 worker: --
20240601 224321 worker: Eth0
20240601 224321 worker: Ethernet: adapter exists
20240601 224321 worker: Ethernet: timeout off
20240601 224321 worker: Ethernet: method dhcp
20240601 224321 worker: Ethernet: address 192.168.1.26
20240601 224321 worker: Ethernet: netmask 255.255.255.0
20240601 224321 worker: Ethernet: gateway 192.168.1.1
20240601 224321 worker: Ethernet: pri DNS 192.168.1.1
20240601 224321 worker: Ethernet: domain *************************
20240601 224321 worker: Wlan0
20240601 224321 worker: Wireless: adapter exists
20240601 224321 worker: Wireless: country IT
20240601 224321 worker: Wireless: SSID TIM-45759456
20240601 224321 worker: Wireless: other None
20240601 224321 worker: Wireless: timeout up to 90 secs
20240601 224321 worker: Wireless: connect to ***********
20240601 224321 worker: Wireless: method dhcp
20240601 224321 worker: Wireless: address 192.168.1.192
20240601 224321 worker: Wireless: netmask 255.255.255.0
20240601 224321 worker: Wireless: gateway 192.168.1.1
20240601 224321 worker: Wireless: pri DNS 192.168.1.1
20240601 224321 worker: Wireless: domain **************************
20240601 224321 worker: --
20240601 224321 worker: -- File sharing
20240601 224321 worker: --
20240601 224321 worker: SMB file sharing: off
20240601 224321 worker: NFS file sharing: off
20240601 224321 worker: DLNA file sharing: off
20240601 224321 worker: --
20240601 224321 worker: -- Special configs
20240601 224321 worker: --
20240601 224321 worker: RoonBridge: not installed
20240601 224321 worker: Allo Piano 2.1: not detected
20240601 224321 worker: Allo Boss 2: not detected, OLED script ok
20240601 224321 worker: IQaudIO AMP*: not detected
20240601 224321 worker: --
20240601 224321 worker: -- ALSA debug
20240601 224321 worker: --
20240601 224321 worker: Cards: 0:D90SE 1:vc4hdmi0 2:vc4hdmi1 3:empty
20240601 224321 worker: 4:empty 5:empty 6:empty 7:empty
20240601 224322 worker: Mixers: 0:none 1:none 2:none 3:none
20240601 224322 worker: 4:none 5:none 6:none 7:none
20240601 224322 worker: --
20240601 224322 worker: -- Audio configuration
20240601 224322 worker: --
20240601 224322 worker: Audio device: 0:D90SE
20240601 224322 worker: ALSA card: has not been reassigned
20240601 224322 worker: MPD config: update not needed
20240601 224322 worker: ALSA output: USB
20240601 224322 worker: ALSA mode: Default (plughw)
20240601 224322 worker: ALSA mixer none exists
20240601 224325 worker: ALSA volume: controller not detected
20240601 224325 worker: ALSA maxvol: 100%
20240601 224325 worker: ALSA loopback: off
20240601 224325 worker: MPD mixer CamillaDSP
20240601 224325 worker: Audio formats: S32_LE, SPECIAL, DSD_U32_BE
20240601 224326 worker: CamillaDSP: USER1
20240601 224326 worker: CDSP volume: -5.99dB
20240601 224326 worker: CDSP volrange: 60dB
20240601 224326 worker: --
20240601 224326 worker: -- MPD startup
20240601 224326 worker: --
20240601 224327 worker: MPD service: started
20240601 224327 worker: MPD port 6600: accepting connections
20240601 224327 worker: MPD ALSA Default: on
20240601 224327 worker: MPD ALSA Bluetooth: off
20240601 224327 worker: MPD HTTP Server: off
20240601 224327 worker: MPD volume: 90
20240601 224327 worker: Saved MPD vol: -1
20240601 224327 worker: Saved SRC vol: 0
20240601 224327 worker: MPD crossfade: off
20240601 224327 worker: MPD ignore CUE: no
20240601 224327 worker: MPD CDSP volsync: on
20240601 224327 worker: --
20240601 224327 worker: -- Music sources
20240601 224327 worker: --
20240601 224327 worker: USB drives: no drives found
20240601 224327 worker: NAS source: Synology
20240601 224415 worker: NAS mount: mount all submitted
20240601 224415 worker: --
20240601 224415 worker: -- Feature availability
20240601 224415 worker: --
20240601 224415 worker: Input select: available, Source: MPD, Output: D90SE
20240601 224415 worker: Bluetooth: available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20240601 224415 worker: AirPlay: available
20240601 224415 worker: Spotify Connect: available
20240601 224415 worker: Squeezelite: available
20240601 224415 worker: RoonBridge: not installed
20240601 224415 worker: Multiroom: available
20240601 224415 worker: UPnP client: available
20240601 224415 worker: GPIO buttons: available
20240601 224415 worker: HTTPS mode: available
20240601 224415 worker: Stream recorder: n/a
20240601 224415 worker: --
20240601 224415 worker: -- Peripherals
20240601 224415 worker: --
20240601 224417 worker: Local display: on
20240601 224417 worker: On-screen kbd: off
20240601 224417 worker: HDMI 4K 60Hz: on
20240601 224417 worker: Rotary encoder: off
20240601 224417 worker: USB volume knob: off
20240601 224417 worker: LCD updater: off
20240601 224417 worker: --
20240601 224417 worker: -- Miscellaneous
20240601 224417 worker: --
20240601 224417 worker: Software update: Automatic check on
20240601 224417 worker: Software update: Checking for available update...
20240601 224417 worker: Software update: Software is up to date
20240601 224417 worker: Auto-CoverView: on
20240601 224417 worker: CoverView timeout: Never
20240601 224417 worker: Auto-shuffle: off
20240601 224417 worker: Auto-play: off
20240601 224417 worker: Web SSH server: off
20240601 224417 worker: Maintenance task: 360 mins
20240601 224417 worker: Current view: reset to Playback
20240601 224417 worker: Active flags: all false
20240601 224417 worker: Reset flags: skipped
20240601 224417 worker: Session check: ok
20240601 224417 worker: --
20240601 224417 worker: -- Startup complete
20240601 224417 worker: --
20240601 224417 worker: Mount monitor: started
20240601 224417 worker: Radio monitor: off
20240601 224417 worker: Watchdog monitor: started
20240601 224417 worker: Responsiveness: Default
20240601 224417 worker: Ready
Posts: 1,274
Threads: 24
Joined: Jun 2022
Reputation:
42
(06-01-2024, 08:56 PM)Venerdi Wrote: 20240601 224321 worker: Ethernet: address 192.168.1.26
20240601 224321 worker: Ethernet: netmask 255.255.255.0
20240601 224321 worker: Wireless: address 192.168.1.192
20240601 224321 worker: Wireless: netmask 255.255.255.0
Not trying to investigate your issue, but as a rule of thumb, you better not have both wired and wireless network enabled...
Posts: 13,376
Threads: 303
Joined: Mar 2018
Reputation:
539
(06-01-2024, 08:56 PM)Venerdi Wrote: (06-01-2024, 06:57 PM)Tim Curtis Wrote: Reboot and then post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
PHP Code: 20240601 224311 worker: --
20240601 224311 worker: -- Start moOde 9 series
20240601 224311 worker: --
20240601 224311 worker: Successfully daemonized
20240601 224311 worker: Wait for Linux startup
20240601 224317 worker: Linux startup complete
20240601 224317 worker: Boot config is ok
20240601 224317 worker: Session loaded
20240601 224319 worker: Package locks applied
20240601 224319 worker: File check complete
20240601 224319 worker: Debug logging off
20240601 224319 worker: --
20240601 224319 worker: -- System
20240601 224319 worker: --
20240601 224321 worker: Host name: moode
20240601 224321 worker: RPi model: Pi-4B 1.2 4GB
20240601 224321 worker: moOde release: 9.0.1 2024-05-30
20240601 224321 worker: RaspiOS: 12.5 Bookworm 64-bit
20240601 224321 worker: Linux Kernel: 6.6.28 64-bit
20240601 224321 worker: MPD version: 0.23.14
20240601 224321 worker: User id: admin
20240601 224321 worker: Home folder: /home/admin
20240601 224321 worker: Time zone: Europe/Rome
20240601 224321 worker: Kbd layout: it
20240601 224321 worker: HDMI ports(s): on
20240601 224321 worker: Sys LED0: on
20240601 224321 worker: Sys LED1: on
20240601 224321 worker: Reduce power: n/a
20240601 224321 worker: CPU governor: ondemand
20240601 224321 worker: Integ audio: vc4-kms-v3d
20240601 224321 worker: --
20240601 224321 worker: -- Network
20240601 224321 worker: --
20240601 224321 worker: Eth0
20240601 224321 worker: Ethernet: adapter exists
20240601 224321 worker: Ethernet: timeout off
20240601 224321 worker: Ethernet: method dhcp
20240601 224321 worker: Ethernet: address 192.168.1.26
20240601 224321 worker: Ethernet: netmask 255.255.255.0
20240601 224321 worker: Ethernet: gateway 192.168.1.1
20240601 224321 worker: Ethernet: pri DNS 192.168.1.1
20240601 224321 worker: Ethernet: domain *************************
20240601 224321 worker: Wlan0
20240601 224321 worker: Wireless: adapter exists
20240601 224321 worker: Wireless: country IT
20240601 224321 worker: Wireless: SSID TIM-45759456
20240601 224321 worker: Wireless: other None
20240601 224321 worker: Wireless: timeout up to 90 secs
20240601 224321 worker: Wireless: connect to ***********
20240601 224321 worker: Wireless: method dhcp
20240601 224321 worker: Wireless: address 192.168.1.192
20240601 224321 worker: Wireless: netmask 255.255.255.0
20240601 224321 worker: Wireless: gateway 192.168.1.1
20240601 224321 worker: Wireless: pri DNS 192.168.1.1
20240601 224321 worker: Wireless: domain **************************
20240601 224321 worker: --
20240601 224321 worker: -- File sharing
20240601 224321 worker: --
20240601 224321 worker: SMB file sharing: off
20240601 224321 worker: NFS file sharing: off
20240601 224321 worker: DLNA file sharing: off
20240601 224321 worker: --
20240601 224321 worker: -- Special configs
20240601 224321 worker: --
20240601 224321 worker: RoonBridge: not installed
20240601 224321 worker: Allo Piano 2.1: not detected
20240601 224321 worker: Allo Boss 2: not detected, OLED script ok
20240601 224321 worker: IQaudIO AMP*: not detected
20240601 224321 worker: --
20240601 224321 worker: -- ALSA debug
20240601 224321 worker: --
20240601 224321 worker: Cards: 0:D90SE 1:vc4hdmi0 2:vc4hdmi1 3:empty
20240601 224321 worker: 4:empty 5:empty 6:empty 7:empty
20240601 224322 worker: Mixers: 0:none 1:none 2:none 3:none
20240601 224322 worker: 4:none 5:none 6:none 7:none
20240601 224322 worker: --
20240601 224322 worker: -- Audio configuration
20240601 224322 worker: --
20240601 224322 worker: Audio device: 0:D90SE
20240601 224322 worker: ALSA card: has not been reassigned
20240601 224322 worker: MPD config: update not needed
20240601 224322 worker: ALSA output: USB
20240601 224322 worker: ALSA mode: Default (plughw)
20240601 224322 worker: ALSA mixer none exists
20240601 224325 worker: ALSA volume: controller not detected
20240601 224325 worker: ALSA maxvol: 100%
20240601 224325 worker: ALSA loopback: off
20240601 224325 worker: MPD mixer CamillaDSP
20240601 224325 worker: Audio formats: S32_LE, SPECIAL, DSD_U32_BE
20240601 224326 worker: CamillaDSP: USER1
20240601 224326 worker: CDSP volume: -5.99dB
20240601 224326 worker: CDSP volrange: 60dB
20240601 224326 worker: --
20240601 224326 worker: -- MPD startup
20240601 224326 worker: --
20240601 224327 worker: MPD service: started
20240601 224327 worker: MPD port 6600: accepting connections
20240601 224327 worker: MPD ALSA Default: on
20240601 224327 worker: MPD ALSA Bluetooth: off
20240601 224327 worker: MPD HTTP Server: off
20240601 224327 worker: MPD volume: 90
20240601 224327 worker: Saved MPD vol: -1
20240601 224327 worker: Saved SRC vol: 0
20240601 224327 worker: MPD crossfade: off
20240601 224327 worker: MPD ignore CUE: no
20240601 224327 worker: MPD CDSP volsync: on
20240601 224327 worker: --
20240601 224327 worker: -- Music sources
20240601 224327 worker: --
20240601 224327 worker: USB drives: no drives found
20240601 224327 worker: NAS source: Synology
20240601 224415 worker: NAS mount: mount all submitted
20240601 224415 worker: --
20240601 224415 worker: -- Feature availability
20240601 224415 worker: --
20240601 224415 worker: Input select: available, Source: MPD, Output: D90SE
20240601 224415 worker: Bluetooth: available, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20240601 224415 worker: AirPlay: available
20240601 224415 worker: Spotify Connect: available
20240601 224415 worker: Squeezelite: available
20240601 224415 worker: RoonBridge: not installed
20240601 224415 worker: Multiroom: available
20240601 224415 worker: UPnP client: available
20240601 224415 worker: GPIO buttons: available
20240601 224415 worker: HTTPS mode: available
20240601 224415 worker: Stream recorder: n/a
20240601 224415 worker: --
20240601 224415 worker: -- Peripherals
20240601 224415 worker: --
20240601 224417 worker: Local display: on
20240601 224417 worker: On-screen kbd: off
20240601 224417 worker: HDMI 4K 60Hz: on
20240601 224417 worker: Rotary encoder: off
20240601 224417 worker: USB volume knob: off
20240601 224417 worker: LCD updater: off
20240601 224417 worker: --
20240601 224417 worker: -- Miscellaneous
20240601 224417 worker: --
20240601 224417 worker: Software update: Automatic check on
20240601 224417 worker: Software update: Checking for available update...
20240601 224417 worker: Software update: Software is up to date
20240601 224417 worker: Auto-CoverView: on
20240601 224417 worker: CoverView timeout: Never
20240601 224417 worker: Auto-shuffle: off
20240601 224417 worker: Auto-play: off
20240601 224417 worker: Web SSH server: off
20240601 224417 worker: Maintenance task: 360 mins
20240601 224417 worker: Current view: reset to Playback
20240601 224417 worker: Active flags: all false
20240601 224417 worker: Reset flags: skipped
20240601 224417 worker: Session check: ok
20240601 224417 worker: --
20240601 224417 worker: -- Startup complete
20240601 224417 worker: --
20240601 224417 worker: Mount monitor: started
20240601 224417 worker: Radio monitor: off
20240601 224417 worker: Watchdog monitor: started
20240601 224417 worker: Responsiveness: Default
20240601 224417 worker: Ready
I don't see anything suspicious in the log.
Try turning the Display off/on, re-seat the HDMI cable and then reboot the Pi.
Posts: 31
Threads: 8
Joined: Jun 2024
Reputation:
0
(06-01-2024, 03:39 PM)Venerdi Wrote: (06-01-2024, 02:01 PM)Tim Curtis Wrote: This message "** To set a new password for your userid type 'passwd'." is ok. It's how you would change your password if desired.
@Venerdi the WebUI does not automatically appear on an attached display. Open a Browser, type http://moode, http://moode.local, or http://IP_ADDRESS_OF_PI.
Menu, Configure, Peripherals has the section the Local Display, Pi Touch etc.
@Tim
Thanks, I solved the problem, but now I have two more questions to ask.
1) Until now I turned on the Pi4 and I was immediately in moOode. Now, it always asks me for login and password. How can I avoid this?
2) The picture on the TV was perfect; now, at the beginning it's full of artifacts, then it goes back to normal, but it goes partly off screen. I don't see a part on the right and the whole top part. In moOde options there is GPIO pin mappings. It can be useful?
v.
what do you mea by "always asks for user/pw"? the console/command line or when you are actually in the moode GUI? when accessing moode via a browser... under system/peripherals... is local display active?
|
