(03-14-2022, 10:38 AM)jonners Wrote: The SCAN function will no longer detect my NAS source. If I enter manually the name that appeared in the scan using the previous version of Moode (GL-MT300N-V2) then I get a 'Share cannot be blank' message.
That sounds like the sort of oddness that comes when the browser is sing an old version of the config page. Try clearing the cache.
My streamer is made of a Raspberry Pi 3A+ with IQAudio DAC Pro. I’ve been using it with Moode for about 6 months without issues. With 8.0.0 it works flawlessly for maybe 15 minutes, then it starts to slow down drastically and eventually I can’t connect to it at all. I’ve tried rebooting it, using different SD cards in case the old one was corrupted, removing scripts (I use a Python script to show the play/pause status as specified here) but with no success: every time it works for a little while and then it packs up. Sometimes it would come back to life after several reboots but only briefly.
I reverted back to the old version of moode (7.6.1) and it works without issues, so it looks like the problem is related to this new release.
The system info I was able to copy just before it stopped working again is this:
Code:
S Y S T E M P A R A M E T E R S
moOde release = 8.0.0 2022-03-12
RaspiOS = 11.2
Linux kernel = 5.15.23-v7+ #1525
Platform = Pi-3A+ 1.0 512MB
Architecture = armv7l (32-bit)
System uptime = up 1 minute
Timezone = Europe/Rome
Current time = 2022-03-14 10:56:45
Host name = moode
Ethernet address = unassigned
Ethernet MAC = no adapter
WLAN address = 192.168.1.142
WLAN MAC = b8:27:eb:37:b4:6f
WLAN country = IT
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = not enabled
Warranty = OK
Root size = 15G
Root used = 21%
Root available = 12G
Root expand = expanded
Memory total = 487 MB
Memory free = 337 MB
Memory used = 150 MB
SoC temperature = 43.5°C
Throttled bitmask = 0x0
Throttled text = No throttling has occurred
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = Off
HDMI output = Off
LED state = 0,0
IP addr timeout = 90 (secs)
Ethernet check = No
USB auto-mounter = udisks-glue
SSH term server = On
PHP-FPM version = 7.4.28
NGINX version = 1.18.0
SQLite3 version = 3.34.1
Hostapd version = 2.9
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = IQaudIO Pi-DAC PRO
Interface = I2S
Mixer name = Digital
Hardware mixer = Yes
Supported formats = S16_LE, S24_LE, S32_LE
ALSA max volume = 100
ALSA output mode = Direct (hw)
ALSA loopback = Off
MPD max volume = 100
Volume step limit = 10
Display dB volume = Off
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.2.4-1.1+rpt2
SoX version = 0.1.3-4+rpi1
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = On
Spotify receiver = Off
Squeezelite = Off
RoonBridge = Not installed
UPnP client = On
DLNA server = Off
GPIO button handler = Off
Multiroom sender = Off
Multiroom receiver = Disabled
UPnP browser = Off
Auto-shuffle = Off
Ashuffle mode = Track
Ashuffle filter = None
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
CamillaDSP = off
MPD httpd = Off
Ignore CUE files = Yes
P R E F E R E N C E S
Appearance
----------------------
Theme = Default
Accent color = Herb
Alpha blend = 0.85
Adaptive background = No
Background image = No
Cover backdrop = Yes
Cover blur = 20px
Cover scale = 1.25
Renderer backdrop = No
Font size = Smaller
Playback
----------------------
Show Queue thumbs = Yes
Show Now-playing icon = Yes
Show CoverView playbar = Yes
Show extra metadata = album,genre,track,disc,date,composer,conductor,performer,encoded,comment
Search site = Google
Playback history log = No
Library
----------------------
One touch album = Play
One touch radio = Play
Albumview sort order = by Artist
Tagview sort order = by Artist
Recently added = 1 Week
Show sample rate = Badge
Cover search pri = Cover image file
Pixel ratio = 2
Thumbnail resolution = 600px,60
Thumbnail columns = 6/2 (Default)
Library (Advanced)
----------------------
Tag view genre = Genres
Tag view artist = Artist
Album key = Album@Artist (Default)
Include comment tag = No
Library filter = full_lib
Library filter str =
Ignore articles = a,an,the
Show tagview genres = Yes
Show tagview covers = Yes
Ellipsis limited text = No
UTF8 character filter = No
Sort tag = Name
Group method = No grouping
Show moOde stations = No action
Show other stations = No action
M P D S E T T I N G S
Version = 0.23.5
Volume type = none
SoX resampling = disabled
Selective resampling = disabled
SoX quality = high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = no
Audio buffer = 32 (MB)
Output buffer size = 128 (MB)
Max playlist items = 16384
Input cache = 128 MB
B L U E T O O T H S E T T I N G S
Version = 5.55
Bluealsa = v3.0.0
Pairing agent = 1.0.0
Pi-Bluetooth = 0.1.18
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (µs)
A I R P L A Y S E T T I N G S
Version = 3.3.8
Friendly name = Stream Pi
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Version = 0.3.1
Friendly name = Moode Spotify
Bitrate (kbps) = 160
Format = S16
Dither = Automatic (Default)
Volume curve = log
Volume range (dB) = 60
Initial volume (%) = 0
Volume normalization = No
Method = dynamic
Gain type = auto
Pregain (dB) = 0
Threshold (dBFS) = -2
Attack (ms) = 5
Release (ms) = 100
Knee = 1
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.9.8-1317 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
03-14-2022, 11:29 AM (This post was last modified: 03-14-2022, 11:30 AM by Tim Curtis.)
(03-14-2022, 11:05 AM)jonners Wrote:
(03-14-2022, 10:53 AM)the_bertrum Wrote:
(03-14-2022, 10:38 AM)jonners Wrote: The SCAN function will no longer detect my NAS source. If I enter manually the name that appeared in the scan using the previous version of Moode (GL-MT300N-V2) then I get a 'Share cannot be blank' message.
That sounds like the sort of oddness that comes when the browser is sing an old version of the config page. Try clearing the cache.
Thanks for the reply. No change though.
The entry for Path is host_name/share_name. If you just enter the host which in your case is GL-MT300N-V2 the validation check for Path sees that there is no /share_name after it and thus the error "Share cannot be blank"
The validation check in 8 is exactly same as in 7.
(03-14-2022, 10:38 AM)jonners Wrote: The SCAN function will no longer detect my NAS source. If I enter manually the name that appeared in the scan using the previous version of Moode (GL-MT300N-V2) then I get a 'Share cannot be blank' message.
Re the scan. What is the output from the command below?
(03-14-2022, 10:38 AM)jonners Wrote: The SCAN function will no longer detect my NAS source. If I enter manually the name that appeared in the scan using the previous version of Moode (GL-MT300N-V2) then I get a 'Share cannot be blank' message.
That sounds like the sort of oddness that comes when the browser is sing an old version of the config page. Try clearing the cache.
Thanks for the reply. No change though.
The entry for Path is host_name/share_name. If you just enter the host which in your case is GL-MT300N-V2 the validation check for Path sees that there is no /share_name after it and thus the error "Share cannot be blank"
The validation check in 8 is exactly same as in 7.
In version 7.6 the SCAN showed either just GL-MT300N-V2 or GL-MT300N -V2/sda1.
In 8.0 the SCAN shows neither of these and manual entry fails as above. So what should I enter as the share name, since /sda1 doesn't do it?
03-14-2022, 11:55 AM (This post was last modified: 03-14-2022, 12:30 PM by petfr.)
Hello , I think I have a bug to report . I have two Raspberry zero 2w with Moode . Version 7.6.1 was previously running on both of them. Have now written the one with the latest version. The Zero w also starts in AP mode , but can not longer find my router during the scan. However, routers in my neighborhood are found. The SSID of my Router is "TP-LINK_2B91 " .
My location is germany .
(03-14-2022, 10:38 AM)jonners Wrote: The SCAN function will no longer detect my NAS source. If I enter manually the name that appeared in the scan using the previous version of Moode (GL-MT300N-V2) then I get a 'Share cannot be blank' message.
That sounds like the sort of oddness that comes when the browser is sing an old version of the config page. Try clearing the cache.
Thanks for the reply. No change though.
The entry for Path is host_name/share_name. If you just enter the host which in your case is GL-MT300N-V2 the validation check for Path sees that there is no /share_name after it and thus the error "Share cannot be blank"
The validation check in 8 is exactly same as in 7.
In version 7.6 the SCAN showed either just GL-MT300N-V2 or GL-MT300N -V2/sda1.
In 8.0 the SCAN shows neither of these and manual entry fails as above. So what should I enter as the share name, since /sda1 doesn't do it?
(03-14-2022, 11:55 AM)petfr Wrote: Hello , I think I have a bug to report . I have two Raspberry zero w with Moode . Version 7.6.1 was previously running on both of them. Have now written the one with the latest version. The Zero w also starts in AP mode , but can not longer find my router during the scan. However, routers in my neighborhood are found. The SSID of my Router is "TP-LINK_2B91 " .
My location is germany .
I have a Zero W.
I'll test later this morning to see what the scan reports in AP mode and whether it finds my Router.
03-14-2022, 12:49 PM (This post was last modified: 03-14-2022, 01:27 PM by petfr.)
(03-14-2022, 12:12 PM)Tim Curtis Wrote:
(03-14-2022, 11:55 AM)petfr Wrote: Hello , I think I have a bug to report . I have two Raspberry zero w with Moode . Version 7.6.1 was previously running on both of them. Have now written the one with the latest version. The Zero w also starts in AP mode , but can not longer find my router during the scan. However, routers in my neighborhood are found. The SSID of my Router is "TP-LINK_2B91 " .
My location is germany .
I have a Zero W.
I'll test later this morning to see what the scan reports in AP mode and whether it finds my Router.
I made an incorrect statement above. It is about two zero 2w. I already changed it. Also have a normal zero w just tested with the new image. This does not find my router either. I have another system with a Raspberry Pi-3B . This is connected via ethernet . His wifi also finds neither my router nor my repeater. It seems to be a problem of my router (TP-Link Archer VR900v). The previous versions of Moode worked flawlessly on all my Raspberrys .
